Used Ms Ultrasonic Technology Group Ultrasound Generator for sale (38,811)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Gjdpey Aibcjfx Abgjbn

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader Gbodpfx Abjwbp Nwogsn N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) Gbodpfefi Tg Hex Abgjn No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,710 mm, total length: 1,660 mm, total height: 2,975 mm, maximum load weight: 3,000 kg, tank capacity: 2,380 l, overall weight: 150 kg, year of last overhaul: 2026, Ultrasonic cleaning unit with a capacity of 2,380 litres. This ultrasonic cleaning machine is equipped with a pneumatic lifting platform with a load capacity of up to 1,500 kg. The lift has three main functions, which are: 1. To assist with the loading and unloading of parts to be cleaned. 2. Assisting with cleaning in hard-to-reach areas, creating a gentle movement of the fluid that helps remove loosened dirt particles. 3. Preventing the ultrasonic action from concentrating on a single point, thereby avoiding marking on the parts to be cleaned when these are made of soft metals such as aluminium or zamak. Ultrasonic cleaning system with patented technology This ultrasonic machine is designed to cover a wide variety of industrial applications. Some of the main applications include: Gbedpoypcunefx Abgsn 1. Parts cleaning: Metal parts or mechanical components requiring the complete removal of residues and oils prior to assembly. 2. Degreasing of parts: Removal of grease and oil in equipment manufacturing and maintenance. 3. Stripping and removal of adhered contaminants: Removal of rust, varnish and other impurities. 4. Cleaning in the mechanical industry: Removal of welding residues and particles from electronic components without damaging them.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,300 kg, ⭐️TM-R34 Column Lift for Commercial Vehicles – Electro-Hydraulic, Wireless⭐️ New, reinforced generation of TM-GROUP mobile column lifts The TM-R34 lift is a technologically advanced solution, designed for professional workshops servicing trucks, buses, trailers, special-purpose vehicles, and agricultural machinery. The set of four mobile columns offers a total lifting capacity of 34 tons, making the equipment more than capable of handling even the most demanding service tasks. Each column features a high-performance electro-hydraulic system and offers a lifting capacity of 8,500 kg, representing a tangible advantage over many solutions currently on the market. A new feature in the TM-R34 model are the additional reinforced support columns on wheels (so-called mobile axle stands), supplied as part of the standard kit. These provide greater stability when working under maximum load and offer additional safety during long-term maintenance operations. Technical specifications: - Model: TM-R34 - Total lifting capacity: 34,000 kg - Lifting capacity per column: 8,500 kg Gjdpov Uk D Rsfx Abgobn - Number of columns: 4 - Lifting height: 1,800 mm - Column height: 2,563 mm - Supported wheel diameter: 480–1,270 mm - Connection type: wireless / signal cable - Power supply: 230V - Motor power: 3 kW - Weight per column: 760 kg - Support columns: 4 pcs included - Certifications: CE, ISO 9001:2015 Support stand parameters: - Maximum capacity: 8,165 kg - Minimum height: 1,240 mm - Maximum height: 1,840 mm - Number of adjustment positions: 7 - Threaded adjustment range: 40 mm - Base dimensions: 810 mm - Upper rubber pad: 150 mm ✅ Wireless control and technology TM-R34 operates in wireless or cabled mode, offering complete operational flexibility. The columns communicate via radio and are fully synchronized. Control panels on each column provide real-time monitoring. Operation in single or group mode is possible. ✅ Reinforced structure and performance The TM-R34 has an increased lifting capacity of 34T (8,500 kg per column) and is powered by 3 kW / 230V motors. The wheel range of 480–1,270 mm enables compatibility with most heavy-duty vehicles. The mobile design allows quick repositioning without installation. ✅ Safety and certification The Safety Lock system secures the load at height, and each post features an emergency STOP button. Four mobile support columns are included, ensuring stability when lifting heavy loads. The device is certified to ISO 9001:2015 and CE standards. ✅ TM-R34 – More Lifting Power, Greater Stability, Full Control The TM-R34 lift is the answer for modern workshops seeking maximum performance, mobility, and safety. With increased 34T lifting capacity, additional mobile support columns, and wireless synchronization, it’s one of the strongest and most functional solutions in its class.

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Gedpsyv Ev Ajfx Abgobn No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Gedpfx Aboycvxmsgsbn Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2018, Operational unit! Gbedpjwctqbsfx Abgjn Ask for additional information!

Condition: used, Year of construction: 2017, Operational condition SPI machine. Ask for specification! Gedpfx Asw Ty Rbebgjbn

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Gedpfx Aow Ty Hcobgsbn Ask for specification!

Condition: new, Year of construction: 2026, Laser power: 6000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Gbjdpfx Ajxaykaebgjn Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. copper: 8 mm Max. brass: 14 mm Max. workpiece weight: 1000 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 4800 kg Electrical connected load: 34 kW

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 15 l, color: blue, operation weight: 1,725 kg, lifting power: 600 kg/m, lifting height: 3,380 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.23 m³, Year of construction: 2026, Equipment: all wheel drive, hydraulics, pallet forks, standard shovel, We offer the compact articulated loader Rippa RL06 as a brand-new machine for commercial customers. This unit is ideally suited for tight spaces in landscaping, agriculture, and construction depots. 🔥 Exclusive Service: 100 km free delivery! We will deliver the machine free of charge within a 100 km radius of 76332 Bad Herrenalb, directly to your yard or construction site. Unloading is handled easily using our company-owned truck. Gjdpfeyzbdtsx Abgjbn Current status: Machines are currently incoming. Reservations can be made immediately. As soon as delivery arrives, the machines can be inspected and test-driven at our location in 76332 Bad Herrenalb. Performance & Drive: Engine: Kubota D1105 (3-cylinder diesel, water-cooled) Power: 18.2 kW / 24.7 HP Emission standard: Stage V / EURO 5 Travel speed: 0 - 8 km/h Tyres: Off-road tires for improved traction Operating Data & Hydraulics: Operating weight: 1,725 kg (can be transported on a 3.5t trailer) Rated load (safe working load): 300 kg Maximum payload: 600 kg Maximum lifting height: 3,380 mm Maximum dumping height: 2,060 mm Hydraulic cylinders: Double-cylinder lift frame for even power distribution Operation: Single-hand multifunction joystick for forward/reverse and lift frame Dimensions: Overall width: 1,150 mm Overall height: 2,300 mm Length with bucket: 3,650 mm Turning radius (outer): 2,400 mm Features & Safety (included): Quick coupler for tool-free attachment changes Standard earth bucket (0.23 m³) Pallet fork Operator canopy with ROPS (roll-over protection) and TOPS (falling object protection) Suspended seat with seatbelt and side safety bars LED work lights and beacon lamp CE certification Prices & Model Variants: Standard version: €12,500 net + 19% VAT (€14,875 gross) Version with telescopic arm: €14,300 net + 19% VAT (€17,017 gross) Sales exclusively to commercial customers (B2B). You will receive a proper invoice with indicated VAT. Warranty: 2 years manufacturer's warranty on spare parts. Rental with purchase option: Upon arrival of the machines, we offer weekly rental of our demonstration unit. If you subsequently decide to buy, the rental amount you have already paid will be 100% credited towards the purchase price. Logistics & Contact: Location: 76332 Bad Herrenalb We can load onto your trailer or truck free of charge on-site using a crane. If you are interested in reserving a machine or have technical questions, please feel free to contact us.

Year of construction: 2026, condition: new, Machining Center Rumba - Processing length 3,000 mm / 4,000 mm CNC-controlled machining center with vertical machining spindle suitable for machining extruded aluminum profiles, light metal, PVC and steel from 3 sides. Controlled tilting worktable: -90°/0°/+90° with intermediate angles. The machine is equipped with an electrospindle 4Kw, 18000 rpm, controlled by inverter and quick tool change (tool changer) with spindle ISO30. Interpolation X, Y, Z and W axes controlled by the numerical control. Brushless motors for X, Y, Z and W positioning. Complete with 4 pneumatic double clamps, tool diameter correction via software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified Windows-based graphics, TeamViewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to process longer parts. Standard equipment: 4kw electrospindle ISO30 4 pneumatic clamps (manually adjustable) safety guard automatic tool changer (10 tools) 4x ISO30 cone complete with tools 3x compartments for collecting chips Gbodpfehywz Ssx Abgon air nozzle Technical specifications: X-axis travel 3,000 mm / 4,000 mm Y-axis travel 400 mm Z-axis travel 300 mm Rapid traverse (X,Y,Z): 50 m/1' Acceleration (X,Y,Z): 1.5m/s2 Electrospindle: 4Kw ISO30 / 6.6kw HSK63 (optional) Spindle cooling: air cooling Max tool length: 130mm Max. tool diameter: 140mm (saw blade) Working pressure: 7 bar Weight 2500kg It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, 5-axis CNC machining center for processing aluminium, steel, light metals and PVC. Bolero 5 has a massive machine bed. The machining spindle is a 17 kW (S6) electrospindle with HKS 63F cone. The maximum speed is 24,000 rpm, controlled by a frequency converter. Bolero 5 has an automatic tool changing system with a 12-place magazine. The work area is equipped with 8 automatic positioning motorized vices controlled by the CN. The travel range of the X-axis is 7,000 mm (optional extension to a total of 9,400 mm). Pendulum machining is also available if desired (optional). It is operated via a PC Windows with a 17" color screen. The machine is equipped as standard with safety and protective devices in accordance with EC directives. Gbedpfx Abohy S Hmegjn It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2017, CNC RS 89.01 Gbjdpfxskuzzme Abgen Glass thickness: 3 mm - 19 mm Technology: Precise CNC rail feed. Each disc can be used multiple times with different tool radius compensations for glass processing.

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. Gjdpfx Abonfvmhegobn The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Gedowgm Ibopfx Abgobn Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology Gbedpfx Abeyh A Nysgon The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Year of construction: 2020, condition: used, functionality: fully functional, The dryer is primarily used for drying sewage sludge or substrate from biogas plants. The material fed into the dryer is swirled in the drying chamber by throw shafts. Exhaust gases from a combustion engine flow around the material, causing the water to evaporate. Daily throughput is approx. 10 t. The dryer is sold complete with all ancillary components such as screw conveyors, control cabinet, auxiliary burner, acid pump, exhaust air dampers, etc. For more details, please contact us directly. Dismantling and delivery possible. The manufacturer can assist with recommissioning. Gbsdpfx Ajyx Iztebgen

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Gbedpfeyrn Sqex Abgen

Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Gedoyw Rffspfx Abgebn Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. If interested or for further information, we are happy to assist you.

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. Godpfx Abjuyhf Hegobn For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For sale: Industrial, fully automated cross-cut saw for trimming packages of lumber and structural components — a complete processing line for formatting bundles to a specified length. The machine is designed for use in sawmills and timber structure manufacturing plants, where process efficiency, precise length repeatability, and bundle stabilization during cutting are critical. The machine is available immediately — inspection and testing possible. Working parameters: • Max. bundle size: 1300 × 1300 mm (width / height) • Max. input bundle length: 6000 mm Gbedpsxn Rt Usfx Abgsn • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. bundle weight: 8000 kg • Cutting accuracy: ±2 mm The minimum bundle cross-section is determined by the extreme positions of the hydraulic clamps — cutting of smaller bundles is permissible. Cutting module: • Main motor: 11 kW • HIWIN heavy-duty linear guides • GB TITANIUM guide bar + STIHL chain • Automatic lubrication system for the guide bar The robust construction of the cutting unit ensures operational stability and precise cutting length repeatability. Bundle stabilization: • 6-point hydraulic clamping system (top + side + before and after the cutting line) • Bundle alignment to vertical rollers • Elimination of bundle movement as the saw enters Process automation: • Intelligent bundle strapping system • Automatic determination of strapping points • Possibility of automatic base cutting • Discharge buffer for cut bundles Conveying and handling: • Cross infeed conveyor • Cross outfeed conveyor • Automatic discharge of bundles after cutting Waste removal: • Belt waste conveyor (~10 m) • Hydraulic tilt rollers in the cutting module (prevents jamming of large waste pieces) Automation: • Siemens PLC controller • Yaskawa servodrive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package — control system heating • Delivery to customer — included • Installation — included • Commissioning — included • Operator training — included The machine is available immediately.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, total length: 1,900 mm, total width: 3,400 mm, total height: 4,600 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Herblitz feed: Max. material width: 550 mm Gedpfx Abeyv A Ipegebn Max. material thickness: 6 mm Siemens control SPS7, 1500F

Year of construction: 2007, condition: used, machine/vehicle number: EKP 84325-81, OPTICAL SORTER FOR CONTAMINANT SEPARATION - SORTEX by Bühler Type: MEAF DevCtrl Year of manufacture: 2007 Advanced optical machine designed for automatic sorting of bulk products, primarily foodstuffs, by color, shape, and structure. Gedpfsyv Aitox Abgobn The unit is mechanically functional. Calibration required. Quoted price does not include transport.