Used Modular Shelf for sale (2,271)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Fodpfemhh Dtex Akyjgh - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm Fedpfx Akeb A I Nqsyegh -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg

Condition: good (used), Food shelf, kitchen shelf, catering shelf, baking tray shelf Fgedpfx Akjb A I Nveyoh -Dimensions: 790/540/H1430 mm -Shelf spacing: 220 mm -Intermediate dimension: 330 mm -Material: Stainless steel -Weight: 45 kg

Condition: good (used), Solar Fence | Mobile Solar Frame, Used Total length: approx. 3,530 mm Total height: approx. 1,700 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules and can be extended at any time with additional elements. Consisting of EACH: Fgodoznxf Sspfx Akyjh 04 x A - Shelf upright, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal braces, Foot plates (182x147x6 mm) The uprights are pre-assembled (bolted framework) 1,510 mm high 610|200 mm deep 08 x Solid rubber heavy-duty roller, used Design: Double-stop swivel roller Roller Ø: approx. 160 mm Roller width: approx. 40 mm Roller material: Solid rubber Plate dimensions: approx. 135 x 110 mm (W x D) Hole Ø: approx. 11 mm 08 x Pallet racking beams, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO 089|2 Agraffe: 5 HK 1,140 mm clear width 16 x Locking pin Dexion, used Type: Speedlock P90 Material color: sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Spacer sleeves made of plastic M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: sendzimir galvanized 01 x Screw material Upon request, you will receive a complete, coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo Micro Inverter 800 Watt incl. Wifi, incl. 5 m AC Connection cable, new Growatt Battery Noah 2000 Watt incl. Wifi (Stackable up to 8 KW), new Solar Module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic Cable 2 x 3 m 6 sq mm Red/black incl. MC4 connector, new We will gladly arrange the contact for you. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Technical details: welding current: 400 A Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 50 V Fgedpoz Dt Taofx Akyjh capacity in kVA: 18,5 KvA protection class: IP23S weight of the machine approx.: 47 kg dimensions L x W x H: 0,60 x 0,23 x 0,45 m The Kemppi FastMig KMS 400 is a powerful, industrial-grade MIG/MAG welding power source designed for professional use in workshops, metal fabrication, mechanical engineering, as well as manufacturing and maintenance applications. In combination with a Kemppi FastMig MSF wire feeder, the KMS 400 forms a modular welding system. The MSF wire feed units are microprocessor-controlled, providing precise and reliable control of the wire feed. Depending on the control panel installed, the system supports conventional MIG/MAG welding as well as synergic welding functions. *

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm Fgsdpfxjv A Sqhe Akyjh centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm Fjdpszf Hn Aofx Akyjgh ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: good (used), Approx. 235 picking carts, Wanzl, 2 sizes – used: Price for partial quantities (2 intermediate shelves per cart): Up to 30 pieces: €195.00 (net) / piece Up to 60 pieces: €185.00 (net) / piece Up to 120 pieces: €175.00 (net) / piece Minimum purchase quantity: 10 pieces Price for complete purchase: €35,000.00 (net) incl. loading! This special price is only valid for collection by week 41/2026! Type: KT3 1297 Type: KT3 1713 Manufacturer: Wanzl Type: KT3 1297 Fodpjz Dwa Rsfx Akyegh Year of manufacture: varying, e.g., 2012 / 2018 Load capacity: 300 kg Load capacity per shelf: 50 kg Most of the carts are 1300 mm long. Some of the wider ones are also 1700 mm long. Approx. 185 pieces are all wide (60 cm deep) Approx. 50 pieces are narrow The equipment with intermediate shelves varies (see photos), on average, there should be at least 1–2 intermediate shelves! Few with a foldable step Condition: good Available: immediately Location: Dortmund area, later storage in Frankenberg / Saxony

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Fsdpfx Akexxpgboyegh Machine dimensions: 435×160×235 cm (H)

Condition: used, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 04/2020, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6.1 L2 long wheelbase, 4Motion / all-wheel drive with differential lock, with a gross vehicle weight of 3.2 tons. From first owner and with optimal equipment, ideal for trades and businesses, e.g. as a service vehicle / workshop vehicle. Workshop fit-out from ALUCA (see below). All-wheel drive (4Motion, 4M, 4x4, 4WD) with mechanical rear differential lock. Underbody protection (engine and transmission) made of aluminum. Trailer hitch, 2.5-ton towing capacity, removable. Mounting rails for roof rack. Auxiliary heater, programmable and with remote control. Climatic air conditioning with pollen filter. Driver assistance systems: - Park Distance Control (PDC) front and rear, optical and acoustic display. - Rear view camera. - Cruise control with speed limiter. - Trailer stabilization. - Side wind assist. - Brake assist (HBA). - Driver fatigue detection. - Tire pressure monitoring system. Fsdpfx Aezw Nz Aokysgh - ABS, ASR, ESP. Light and Visibility Package: - Automatic headlights. - Automatic windshield wipers. - Automatically dimming interior mirror. Audio-navigation system Discover Media (touchscreen color display): - Navigation with TMC. - Radio (FM). - USB, Bluetooth audio, web radio, BT streaming. - Hands-free system for mobile phone with Bluetooth. - App Connect (Apple CarPlay, Android Auto, Mirror Link). - Mobile Online Services Car-Net. - Voice control for radio, media, telephone, navigation. Multi-function display Plus / on-board computer. Electrical Package 1: - Electric windows. - Electrically adjustable and heated exterior mirrors. Central locking with remote control. 2nd battery with separator relay. Heated windshield washer nozzles. Spare wheel in driving condition and jack. Additional equipment: Airbag package: - Front airbags. - Side airbags in the seats. - Head airbags in the B-pillar. Sliding door to the cargo area on the right with tinted window. Rear door with tinted window, heated, windshield wiper. Wheelbase 3400 mm. Truck registration - N1. 6-speed manual transmission. Adjustable steering wheel. Comfort driver and passenger seat with armrests on both sides, foldable, adjustable: - Seat height, backrest, lumbar support. Seat cover fabric. Non-smoker package. Heat-insulating glazing. Cargo area equipment: ALUCA workshop fit-out (similar to Bott, Sortimo, Würth). Shelving with storage compartments on both sides, shelf compartments, 10 drawers, cabinet compartment and 4 tool / small parts cases (ALU). Fold-out vise. Cargo area partition with window, upholstered in the driver's cab (noise-insulated). Robust, plastic-coated wooden floor. Headliner. Load securing through eyelets and mounting rails. Bright LED lighting. Cargo area dimensions: - Length at the bottom: approx. 282 cm - Length in the middle: approx. 270 cm - Length at the top: approx. 258 cm - Height: approx. 134 cm Mounted tires: Winter tires 215/65 R 16 on steel rims with approx. 9/9/9/9 mm tread depth. Additional tires: Summer tires 205/65 R 16 on steel rims with approx. 3 / 3 / 3 / 3 mm. Maintenance history from VW: 02.2021 / 26,283 km Inspection with oil change. 02.2022 / 54,685 km Inspection with oil change. 03.2023 / 79,989 km Inspection + brake fluid + oil change. All-wheel drive coupling (Haldex). 07.2023 / 85,852 km Oil change. 07.2023 / 85,852 km Action 5711 Critical 01. 03.2024 / 94,392 km Inspection. 04.2025 / 109,843 km Inspection with oil change + brake fluid + interior air filter. 03.2026 / 126,180 km Inspection with oil change + interior air

Condition: used, mileage: 217,000 km, power: 140 kW (190.35 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Fgodpsz Haxnefx Akyjh 2nd battery (auxiliary battery) in cabin, 3-button remote control for central locking, overhead storage in driver's cab, Acoustic package, electrically folding exterior mirrors, exterior mirrors with blind spot assist, DAB tuner (digital radio reception), entry handle on rear right pillar, Driver assistance system: Attention Assist (drowsiness detection sensor), tachograph controls in front under overhead shelf, Suspension: Stabilization level I, fire extinguisher, vehicle without speed limiter system, rear lights partly LED, terminal strip for electrical connections (base of driver’s seat), instrument cluster with color display, chrome radiator grille, radiator grille frame in vehicle color, cable duct at rear portal, cable duct at side wall, side marker lights, metallic paint, engine PTO front with bracket for additional coolant compressor, MBUX multimedia system (10.25" touchscreen with navigation), Park Package with reversing camera, spare wheel with standard tires, spare wheel carrier under rear frame incl. jack, windshield wipers with rain sensor, LED High Performance headlights, sliding door cargo/passenger area left, rear mud flaps, Seats in driver's cab: double passenger seat, comfort sprung driver's seat, driver's seat base low, additional relay for auxiliary battery, rear door step, USB port center under dashboard (charging only), fleece battery 92 Ah, jack Additional features: 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, Hill start assist, traction control (ASR), washer fluid level indicator, electrically adjustable & heated exterior mirrors (both sides), outside temperature display, automatic headlight activation, entry handle for sliding door at cargo partition, Electronic brake force distribution (EBV), Driver assistance system: Active Brake Assist, Side Wind Assist, Lane Keeping Assist, digital tachograph, rear door (opening angle 180 degrees), body/construction: standard high-roof panel van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71L, full partition wall in cargo area, steering column (mechanically adjustable), headlamp leveling system, Mercedes-Benz emergency call system, engine 3.0 L - 140 kW CDI CAT, wheelbase 3,665 mm, low emissions according to Euro 6 standard, sliding door cargo/passenger area right, driver's seatbelt system with warning device, seat upholstery: fabric, start/stop engine system, service interval display (Assyst), heat-insulating glazing (windshield with upper band filter), gross vehicle weight 3.5 t * Power steering * Partition wall * Central locking Air conditioning: Air conditioning Safety: ABS * ESP Parking aid: Camera * Rear * Front Between wheel arches: 96 cm The vehicle is in TOP condition!!! Mercedes service history up to 160,000 km, 2 keys Financing available!

Condition: excellent (used), Year of construction: 2022, Warehouse trolleys with shelf. Dimensions: width: 250 cm depth: 115 cm height: 230 cm The Corletta can be used for in-plant transport and storage of almost all types of goods. Thanks to the ability to stack up to three layers, the full warehouse height can be utilized. Fgodpoxmt Ewjfx Akyeh Stock available: 1000 pcs.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm Fedpoz Dth Rsfx Akyegh

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06000511/001, These two vertical lift storage systems, model Kardex Shuttle XP 250-2150x864, version H/N55/N22D11B/N75D15/20, manufactured in 2006, with a permissible total load capacity of 2 x 32,900 kg and a permissible shelf load of 245 kg, will be auctioned off in our complete online auction "Kardex Vertical Lift Storage". Further details: Description Year of manufacture: 2006 Used Technical data Manufacturer: Kardex Produktion Deutschland GmbH Model: Shuttle XP 250 Type: Shuttle-XP-250-2150x864 Year of manufacture: 2006 System 1 • Serial number: 06000524/001 • Permissible shelf load: 245 kg per shelf • Permissible total load capacity: 2 × 33,250 kg System 2 • Serial number: 06000511/001 • Permissible shelf load: 245 kg per shelf • Permissible total load capacity: 2 × 32,900 kg Electrical data (per system) • Mains connection: 3/N/PE 400 V • Frequency: 50/60 Hz • Rated current: 17.0 A • Connection power: 8.6 kVA • CE marking available These systems are ideal for space-saving, safe, and efficient storage of tools, spare parts, small parts, as well as production and operating materials. Fgsdpez Eqatsfx Akyoh The storage systems operate according to the proven "goods-to-man" principle. The requested shelves are automatically transported to the retrieval opening, which reduces search and travel distances and significantly increases efficiency in storage and production operations. The vertical design makes optimal use of the available hall height and achieves a high storage capacity in a small footprint. Condition An on-site inspection is recommended. Dismantling, loading, transport, and recommissioning are the responsibility of the buyer or will be arranged separately. As pictured Without any other items or components shown in the images Content, condition, and completeness are unverified Functionality is unverified

Condition: new, Ruchser standard offering with layout for a wooden window manufacturing process, including profiled glazing bead and screw-connected corner joints. ----- Daily capacity: approximately 30 windows Manufacturing process consisting of: Item 1.0 - Article 107850000 ----- 1 piece RU-PWD-H1600/130/4 profile rack, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cut-to-size pieces. 12 support arm pairs per column, permanently welded to the column, 2 center columns adjustable, clear distance between support arms 130 mm, depth of support arms per side 400 mm, support arms with felt padding, with 4 swivel castors, diameter Fgsdpfx Aoytx Ulokysh 150 mm, 2 of which with locking mechanism. Item 2.0 - Article 10776000 ----- 1 piece RU-MSTR assembly station for frame hardware 3000 mm long, 600 mm wide 1 piece shelf for hardware 1 piece support table with felt padding Work height adjustable between 900 - 1100 mm (Without screw units) Item 2.1 - Article 6747 ----- 1 piece guide rail with carriage, 3000 mm long Item 2.2 - Article 6308 ----- 1 piece balancer for tools, 3 to 5.5 kg Item 2.3 - Article 10778000 ----- 1 piece RU-STS-A screw feeder with automatic screw feeding system POWASERT, consisting of screw feeder and feeder unit ADS-MF4, complete with hose connections, screw feeder ADS 2445 RD with torque cut-off. Set to the screw guide used by the customer. Suitable for the following screw dimensions: Shank diameter: 2.4 - 4.0 mm Shank length 10 - 35 mm Head diameter 5 - 8 mm When ordering, information about the screw must be sent to the manufacturer's factory. Item 3.0 - Article 10782000 ----- 1 piece RU-EW-2S storage rack, double-sided Storage capacity max. 36 pieces of frame profiles in L-shape, screwed together, length 1200 mm, depth 800 mm, height 2200 mm, support beams with felt padding, 4 swivel castors, 2 of which with stoppers Item 4.0 - Article 10766000 ----- 1 piece RU-DR-1 rotary table with travel mechanism for frame assembly. Table with parking brake. Support platform with crossbars and one pull-out section each to the left and right with felt padding. Basic dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, work height 900 - 1100 mm adjustable Item 4.1 - Article 5360, permanently mounted tool storage 1000 x 400 mm for RU-DR-1 Item 4.2 - Article 6354 ----- 1 piece 3-meter travel rail for travel mechanism, rail 10 mm high Item 4.3 - Article 6454 ----- 1 piece travel mechanism with flanged wheels and parking brake Item 4.4 - Article 6788 ----- 1 piece corner screwing device, 1 pair of pneumatically height-adjustable clamping units for fixing the profiles at a right angle. Item 5.0 - Article 10383000 ----- 1 piece RU-DK-T14/34 rotary tilting table with pneumatic tilting mechanism. Work platform with 4...

Condition: used, -M4 Soleo -Manufacture date: 11/2017 Fodpfx Akewxwbpeyjgh -Dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg

Condition: excellent (used), -M4 Soleo -Overall dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 Fgodpfx Aowxx Nnekyeh - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg -Year of manufacture: 11/2017

Condition: excellent (used), -Delivered with proofer with heating -Three-chamber modular oven - NP:7367169 - Type: E-20 - Model: ST-02 - Internal dimensions (WxD): 1217x669 mm / deck - External dimensions (WxD): 1717x1073x315 mm / deck - Capacity: 3x (600x400 mm) / deck - Baking surface: 0.82 m² - Voltage: 3x 230/400 V / 21.6/11.7 A / 3 Ph - Power: 3x 7.8 kW- 50/60 Hz Fodpfxjwx I Uyj Akyogh - Weight: 3x 168 kg - Serial Number: 175.832 - Year of manufacture: 29-03-06 - Not equipped with steam -Proofer with heating - Type: E-02 + humidity - Model: ST-02 - Power: 1 kW - 50/60Hz - Voltage: 230V / 5A / 1Ph. - Serial number: 174.091 - Date of manufacture: 23/09/05 - Heated proofer with stand, 6 guides for trays or dough tubs 600x400 mm The listing was translated automatically. Translation errors are possible.

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg Fgjdpfx Aju N Agkjkyjh space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Fedeu N D Rdopfx Akyogh Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen Fgodpfjz Hmpasx Akyjh This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: new, Load Weight Shelf 10000 kg Loading weight per level 2000 kg Number of load levels 5 Stk. Recommended material length 6000 mm Fgedpfx Akofgygzjyoh Column width 3000 mm Shelf height 2440 mm dimensions 3,8 x 0,9(1,35) x 2,45 m

Condition: new, Load Weight Shelf 15000 kg Loading weight per level 3000 kg Number of load levels 5 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Fgodpfxofgyg Es Akyjh Shelf height 2440 mm

Condition: new, Load Weight Shelf 30000 kg Loading weight per level 3000 kg Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Fjdpsfgyhbofx Akyegh Column width 3000 mm Shelf height 2440 mm

Condition: excellent (used), Year of construction: 2018, The Canon Arizona 1260 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. The Roll Media Option (RMO) for the Canon Arizona 1260 XT is a modular add-on unit that expands the capabilities of the true flatbed printer. While the XT model is primary engineered for large-format rigid media, the RMO bolts onto the machine to seamlessly handle flexible, roll-fed substrates Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: October 2017 Mileage: 25.000m² ONLY!!!!! Print head status: NEW HEADS!!!!! Fodpfjz E Nvmsx Akyjgh Print area: 3,08x2,50 meters Roll option: Availavle In production, demo possible Location: Western Europe For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt