Used Mecal Fr 830 Easy for sale (7,425)

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12-562, overall weight: 900 kg, workpiece diameter (max.): 40 mm, spindle diameter: 54 mm, type of input current: three-phase, roll diameter: 150 mm, spindle speed (max.): 80 rpm, spindle speed (min.): 10 rpm, total height: 2,150 mm, total length: 1,200 mm, total width: 800 mm, roll width: 80 mm, year of last overhaul: 2026, Equipment: documentation/manual, We offer this factory-refurbished thread rolling machine RWT 12X FR, year of manufacture 2013. Directly from the manufacturer! Machine type: RWT 12X FR Rolling force: 12 t Power: 5.5 kW Year of manufacture: 2013 PLC: Siemens S7-313c HMI: Siemens OP7 Frequency inverter: Siemens Micromaster 440 Speed: 10–80 rpm, stepless adjustment Max. tool width: 80 mm Rolling spindle diameter: 54 mm Rolling die diameter: max. 150 mm Suitable for plunge and through-feed rolling. Condition: very good, used, workshop-refurbished by the manufacturer If you have any questions or need further information, please write us a message or call us. Bdjdoydkb Sspfx Aa Deb

Condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Bsdsd Sg Hhjpfx Aa Dedb Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second Bodpfx Aasw Sgnkj Dsdb - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, operating hours: 1 h, for drills (HSS and solid carbide)diameter 7 – 20 mm Bdjdebrptvepfx Aa Dob (option ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° tip angle fast, easy, precise, economical Specifications for EASY-POINT-GRINDER EPG-1 Tip-angle step less adjustable between 90° – 140° Standard collet-set for drills diameter 7 – 20 mm Optional collet-set for drills diameter 3 – 8 mm Optional collet-set for drills diameter 20 – 30 mm CBN-grinding wheel for HSS drills Ø 118 mm Opt. DIAMOND-grinding wheel for carbide drills Ø 118 mm Brush-less electrical motor 250 Watt Spindle speed 2900 RPM Electrical input specifications 230 Volt 50 Hz Weight ca. 22 Kg / 45 lbs Re-sharpen your drills according to your materials and your machining conditions!

Condition: used, input current: 243 A, Mitsubishi frequency converters - Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, C4C9186-H04 Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, C4C9186-H04 Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, S/N IVC815SSA101 Mitsubishi F700, FR-AF740-03610-EC, F41R43, 132kW, 232A Bdsdsvwmuqspfx Aa Dsb

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1440 ST5 Easy Comfort Telehandler rigid 4t 14m The MT 1440 Easy telehandler is designed for construction sites requiring high lifting heights. With a lifting capacity of 4 tonnes, it enables safe placement of pallets at heights of up to 14 meters. This robust machine is equipped with a sheet metal-clad low door and an electric window to minimize breakage risks. The cab offers excellent visibility for the operator to continuously monitor site operations and track the load to its set-down point. The MT 1440 can be easily transported between job sites thanks to numerous lashing points, and adapts to any terrain with 42 cm ground clearance, 3 steering modes, and 4-wheel drive. Maximum load capacity: 4000 kg Maximum lifting height: 13.53 m Maximum outreach: 9.46 m Breakout force with bucket: 7400 daN Overall length with carriage: 6.02 m Length to fork face: 6.13 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cab width: 0.89 m Tilt angle up: 12° Tilt angle down: 114° Turning radius (over tires): 3.94 m Bedpfxsxmqw Re Aa Djdb Own weight (with forks): 10,855 kg Weight: 10,900 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 final TD 3.6 L Cylinders: 4 - 3621 cm³ Engine power (hp/kW): 75 hp / 55.40 kW Max. torque / engine speed: 340 Nm @ 1600 rpm Tractive force: 8,320 daN Transmission: torque converter Number of gears (forward/reverse): 4 / 4 max. Maximum travel speed: 20 km/h Automatic parking brake Oil-immersed disc brakes on front and rear axles Hydraulic pump type: gear pump Hydraulic flow rate / pressure: 106 l/min - 270 bar Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R63 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1840 easy Comfort Telehandler 18m 4t The MT 1840 Easy telehandler was designed for construction sites requiring substantial lifting heights. With a lifting capacity of 4 t, it enables safe pallet placement at heights of up to 17.55 m. This robust machine features a sheet metal-clad low door and an electric window to minimize the risk of breakage. The cabin provides excellent visibility, allowing the operator to constantly monitor site activities and track the load to its destination. Thanks to multiple lashing points, the MT 1840 can be easily transported from one site to another and, with 37 cm ground clearance, 3 steering modes, and 4-wheel drive, it adapts to any terrain. Max. load capacity: 4,000 kg Max. lifting height: 17.55 m Max. outreach: 13.08 m Breakout force with bucket: 7,400 daN Overall length with fork carriage: 6.15 m Length to front of forks: 6.27 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cabin width: 0.89 m Tilt angle upwards: 16° Tilt angle downwards: 110° Turning radius (over wheels): 3.94 m Own weight (with fork): 11,710 kg Weight: 11,710 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 final TD 3.6 L Cylinders: 4 - 3,621 cm³ Engine performance (HP/kW): 75 HP / 55.40 kW Max. torque / engine speed: 340 Nm @ 1,600 rpm Tractive force: 8,320 daN Transmission: torque converter Number of gears (forward / reverse): 4 / 4 Max. travel speed: 20 km/h Automatic parking brake, oil-immersed multi-disc brakes on front and rear axles Hydraulic pump type: gear pump Hydraulic flow rate/pressure: 106 l/min - 270 bar Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Steering wheels (front / rear): 2 / 2 Drive wheels (front / rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R64 WhatsApp support available! If you have any questions regarding the vehicle or require further information, feel free to contact us via WhatsApp. WhatsApp WhatsApp Bjdpfoxmqwqex Aa Dsdb

Condition: new, functionality: fully functional, machine/vehicle number: HR14997, Year of construction: 2025, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 56 kW (76.14 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 11,870 kg, total length: 6,150 mm, drive type: Diesel, construction width: 2,360 mm, Rigid Telehandler VIN: HR14997 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Torque converter Condition: New Technical condition: New Front tires type: Solid rubber Front tires size: ALLIANCE 4008024 HRC Front tires condition: New Rear tires type: Solid rubber Rear tires size: ALLIANCE 4008024 HRC Rear tires condition: New Bdsdpfx Aox U Nb Hsa Deb Description: 12-month factory warranty / Max. 2,000 operating hours Rear work lights, front work lights, road traffic regulations (STVZO), full cab, air conditioning, CE certificate, interior mirror, exterior mirror, joystick, seat, rear license plate light, 12V battery, diesel preheater, leveling system Height-adjustable steering column TÜV preparation Negative brake Quick-change couplings Additional hydraulic function

Condition: new, Year of construction: 2026, bending angle (max.): 145 °, power: 3 kW (4.08 HP), Equipment: documentation/manual, Long folding machine (HKS-E 6m Easy) with motorized cutting system, 5 inch Touch screen and Easy programming software with 40 programms stoarage capacity. Working length: 6.100 mm Machine length: 7.000 mm Sheet metal thickness: 1,2mm (Al), 1,0 mm (Stahl) Stand number: 5 Machine weight: 2.500 kg Delviery time: 3 Months Bdedpferul A Aox Aa Djb

Condition: used, Year of construction: 2023, IPTE EasyRouter DEP.AP0160.1 + Ruwac DS 64400 M Zone22 Bdjdpfx Aox Uqnzoa Djb 2023

Condition: ready for operation (used), Mitsubishi FR-A720-2.2K Inverter Freqrol-A700, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Bdedpfx Aei Eb I Ija Djb

Condition: ready for operation (used), Philips NC 9418 830 Rack, E Stand and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bsdpfx Aaoi Eckuj Dodb

Condition: ready for operation (used), Philips fan assembly for Philips 4022 226 4230 NC 9418 830 01701 Rack, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bsdoi Eckmjpfx Aa Dodb

Condition: ready for operation (used), Philips fan assembly for Philips 4022 226 4230 NC 9418 830 01201 rack, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bodpji Eckiofx Aa Dedb

Condition: ready for operation (used), Philips fan assembly for Philips 4022 226 4230 NC 9418 830 01711 Rack, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bodpji Eckqjfx Aa Dodb

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 2.2 kW Bdjdpfx Aeb A Nulsa Dsb -Dimensions: L300/W220/D180 mm -Number: 1x converter available Price: per piece -Weight: 8 kg

Year of construction: 1987, condition: used, pressure 63 t throat 300 mm stroke 8-140 mm Bsdpfjp Sycwsx Aa Dodb no. of strokes 70 Hub/min ram - range of adjustment 100 mm table surface area 750x620 mm ram surface 500x340 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 2100x1500x3300 mm

Year of construction: 1986, condition: used, pressure 100 t Bdjdpfx Aajp Syczs Dob throat 340 mm stroke 8-140 mm no. of strokes 50 Hub/min ram - range of adjustment 110 mm table surface area 1000x700 mm ram surface 650x450 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 10,5 t dimensions of the machine ca. BxTxH 2300x1600x3500 mm

Condition: used, first registration: 06/1990, color: other, Year of construction: 1990, OLD LOWLOADER TIRES. Bdedpfx Aaexvx Nye Dob

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Bsdpfx Aswt Swzja Dedb

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Travel distances: - X-axis: 2,685 mm Bdsdpfxjx Enqbo Aa Dsb - Y-axis: 1,095 mm - Z-axis: 140 mm Milling aggregate: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, lateral Drilling head: - 9 vertical drilling spindles at 32 mm pitch - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Grooving saw: in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: as agreed Storage location: Lower Saxony

Condition: new, Year of construction: 2025, Cutting length 3200 mm Bdodpfx Aowiipmsa Dsb Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1820x585x1450 mm Weight 500 kg Total power requirement 4 kw Bedpfx Aajvz Hd Hj Djdb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2285x1420x1730 mm Weight 1600 kg Bdodovz Eyaspfx Aa Dob Total power requirement 22 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2285x1420x1730 mm Bdjdpfovz Epzox Aa Dob Weight 1600 kg Total power requirement 22 kw