Used Long-Term Ventilator for sale (12,623)

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-Axle Volvo Machine/Platform Transporter FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - Safety long-distance driver cab FH - Cab autonomous heater, 2 kW - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Transmission / I-Shift control via driver's seat control unit - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco cruise control (cruise control), including braking cruise control - Manual shifting possible in automatic mode (incl. Kickdown, adaptive traction control) - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (on both sides) - Driver alert system for fatigue warning - VEB Volvo Engine Brake - Etc. WIESE body for platform and construction machine transport with hydraulic loading ramps - With 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height to upper edge of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, volume design - Short cross member spacings for high point loads Fpodsw Itl Uepfx Akyjn - Rear tapered for low approach angle - Outer frame profile 90° - Front wall, reinforced version - Storage box inside, below the front wall - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams with continuous Multi-X contour along the full length with numerous 2.5 t lashing points - 4 lashing eyes, 8 t, recessed at the rear (left/right/center/center) - 4 lashing eyes, 8 t, recessed in front of the front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as two individual/extendable pieces, both laterally adjustable - Ramps can be used as approach ramps or as drive-through ramps for material handling equipment (extension section remains closed), fixed section placed onto the building ramp - Sturdy locking bar for transport security (alternative with belt tension) - 2 hydraulic rear supports with pads, buzzer and control light in cab - Ramp and support operation via electro-hydraulics - Control via radio remote control and emergency operation at the control block - Control block mounted in stainless steel tool box at side of frame - Superwinch 8.2 t cable winch with approx. 20 m steel cable - Access steps with handrails right and left for access to load area - 5 stainless steel toolboxes in drawer design, incl. lighting as option (surcharge) - Side panels as per sample pictures (green vehicle) optional (surcharge) - Body coating KTL - Ball hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high at the front wall - 4 LED work lights on frame sides as ambient lighting - 2 LED work lights at the rear - 1 removable rotating beacon at rear The stock vehicle comes with white cab and superstructure in Novagrau (outer frame paintwork according to RAL color of your choice upon request, price on application).

Year of construction: 2024, condition: new, Mobile panel transport cart New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated - Head joint rotation angle CW/CCW 180° - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: - A mobile chassis - An electric lifting and tilting system - An automatic vacuum unit Fpedpfjw I Upnex Akyjn - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. BASIC TECHNICAL PARAMETERS: Swing over bed: Ø 840 mm Fpodpfx Aksuq A Icsyen Swing over cross slide: Ø 520 Swing in the gap: Ø 1040 mm Length of gap: 390 mm Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Machine located in central Poland, ready for checking. Perfect condition.

Condition: excellent (used), JAEH Linear Thermobreak – Thermal Treatment System in Stainless Steel JAEH linear thermobreak in stainless steel, designed for the continuous thermal treatment of liquid, semi-liquid, and crushed food products, especially within industrial processing lines for tomatoes, fruits, and vegetables. The equipment allows for rapid and controlled heating of the product before subsequent extraction, pulping, refining, or concentration operations. This thermal treatment can be used to modify the product's characteristics and facilitate the following stages of the process. Its horizontal configuration, piping and valve system, and stainless steel construction enable its integration into continuous processing industrial facilities. MAIN FEATURES -Manufacturer: JAEH -Type: Linear Thermobreak / Preheater -Application: Continuous thermal treatment -Horizontal configuration -Controlled product heating -Continuous industrial operation -Tubular treatment chamber/body -Product circulation system -Integrated process piping and valves -Control of thermal utilities -Construction mainly in stainless steel -Robust structure with adjustable legs -Designed for integration into process lines -Suitable for pre-processing before extraction and refining -Hygienic construction for the food industry PROCESS The previously crushed or prepared product is continuously pumped into the JAEH thermobreak, where it undergoes thermal treatment for a controlled period. Depending on the working temperature and the process used, the treatment can be configured according to the product's requirements before continuing to the next operations. In tomato and fruit processing lines, this type of equipment can be part of Hot Break or Cold Break processes, depending on the temperatures and conditions used. It can be integrated with: Crushers and mills Fpedpfxjwny Epe Akyon Product pumps Conveyors Refiners / finishers Turbo pulpers Buffer tanks Evaporators Aseptic sterilizers Aseptic fillers APPLICATIONS Especially suitable for tomato processing industries, fruit and vegetable processors, and manufacturers of purees, pulps, concentrates, and sauces. In tomato processing, the thermal treatment prior to refining can be used to influence enzymatic activity, viscosity, and the final characteristics of the pulp, depending on the selected process conditions. The combination of JAEH technology, continuous operation, and industrial construction in stainless steel provides a solution for professional lines for thermal treatment and product preparation. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2014, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3000 mm RAPID FEEDS L-T-V: 30 m/min Fodpfxswl R Ams Akyspn TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm PALLET: 2000 x 2500 mm; 1200 rpm; 8000 Nm MAX ADMITTED LOAD: 30000 Kg HEAD: A/B AXIS AUTOMATIC ; MILLESIMAL POSITIONING ; ISO 50 ; 6000 rpm; 38 kW TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 HIGH PRESSURE COOLANT: 20 Bar ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Fodjvpuvgjpfx Akyspn Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1250x1750 mm weight 800 kg Fsdpov Dmrvofx Akyepn total power requirement 8,5 kw

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing, on three legs Container diameter: 2250 mm Fjdpfx Aohg Niqjkyopn Heatable/coolable double jacket Enamelled container

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Max working width mm 1300 Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Adjustable feeding speed: m/min 4 -20 PLC control pane Separate (from the machine's body) electric and command cabinet Total installed power KW 8 Equipped with: Fjdpegz Swwsfx Akyspn 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75)

Condition: like new (used), Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for the pallet racking crossbeam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Pallet racking crossbeam, 2nd choice Material color: RAL 5010 Gentian Blue Crossbeam type: Head crossbeam U-profile: 70x42 mm Clip: 5 hooks Clear width: approx. 1,970 mm Max. load per crossbeam pair: 600 kg, with evenly distributed load 02x Locking pins, 2nd choice Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Further information / data: These crossbeams / longitudinal members can be used in pallet racking as a storage compartment for boxes / cartons, etc. The storage of Euro pallets / pallets is not permitted on these crossbeams. The maximum load per crossbeam pair is approximately 600 kg. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Fpjdpfx Akjhryi Isyjn Racking inspection Racking inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal Fodpfshr Suysx Akyjpn -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: EL1018 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Condition: used, Valve terminals, multi-pin connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island -Valves: Festo 161 360 T702 and 162 550 T602 -Pressure regulator: 0 - 4 bar -Individual components: see photos -Dimensions: 260/160//H130 mm Fjdpfx Ashzzcgokyopn -Weight: 2.5 kg

Condition: good (used), The 7025 Rodent Ventilator is a positive pressure pump (according to Starling's Ventilator method), designed for use with guinea pigs, rats, mice and small birds. The 7025 drive consists of a variable speed geared motor linked by a novel variable stroke mechanism to easily interchangeable cylinder/piston assemblies. Their precisely regulated geared-motor speed is controlled by an electronic feedback-controlled drive, thus providing the most accurate and reliable stroke rate control of any respirator available. Electronic noise broadcasting is negligible, and the pumps are also quiet to the ear. Fpedpfx Aksh N D Iljyen The unique linkage mechanism insures that: the piston almost touches the cylinder end with each stroke, regardless of the pre-set volume, thus insuring all air taken into the pump is expelled with each stroke. The volume, clearly indicated on a stationary dial, is adjustable by means of a knob while the pumpis either running or at standstill. The reciprocating motion is generated, adjusted and transmitted to the piston by rods and articulatedjoints only. The lack of sliding friction leads to: practically no wear and no backlash, hence silent operation and exact stroke reproducibility. The 7025 can be equipped with 5, 10 or 30ml cylinder/piston assembly. The operation of the ventilator may be "paused" by an external TTL logic signal (optional feature). Synchronised START/STOP feature available as optional (series 7125). The picture features a Rodent Ventilator 7025, together with the 6025 for Cat/Rabbit Good working condition. Please check out our other listings as well.

Year of construction: 2006, condition: like new (used), Details on request Fodpefla Emjfx Akyopn

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, loading space length: 4,800 mm, loading space width: 2,100 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, IVECO DAILY with "LeMans" trailer: * Iveco Daily * EURO VI D * 8-speed automatic transmission * Factory-installed air suspension on rear axle * Central locking with remote key * Driver's comfort seat * Radio with Bluetooth/navigation * Leather multifunction steering wheel * Electric windows * Automatic climate control * Electrically adjustable exterior mirrors * LED daytime running lights * LED headlights * Sleeper cab painted in vehicle color * Paint color: Gray, freely selectable for order vehicles * Roof storage above the windshield * 90 l tank * VDI interface for telematics system, ACC + traffic jam assist Fpedpfx Akofq I Dljyen * Emergency braking assistant AEBS with City Brake * Tachograph * Electronic parking brake Platform: * Loading area approx. 4800x2100 mm * LED work lights integrated into the side of the loading floor * Tare weight approx. 390 kg * Aluminum frame, C-profile, welded * Fenders with mud flaps * Tool box, 1 piece * Tow hitch with 3500 kg towing capacity * Backsleeper * Auxiliary heater VEHICLE TRANSPORTER "LE MANS" TECHNICAL DATA Trailer type Le Mans * Total weight 3500 kg * Payload 2570 kg * Internal dimensions 8352x2100 mm * Floor: Aluminum * Tie-down points via railing * Frame: Steel, welded, hot-dip galvanized * Electrical system: 13-pin, 12V * Tires: 6x195/50/R13C * Axle manufacturer: AL-KO or KNOTT * Axles: KNOTT 3x1350 kg * Braked axle * Support wheel as standard * Loading ramps as standard, 200 cm * Wheel chocks, 2 pieces plus vehicle registration document/COC: €39.00 Cargo securing equipment is also available from us: * Tension and lashing straps * Blocking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing options available. We manufacture superstructures of any size and type for any chassis. Canvas, GRP sandwich, aluminum. Visit us at: Superstructures - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale are subject to change; no liability for printing and input errors.

Condition: used, machine/vehicle number: 19762,

Condition: new, Year of construction: 2023, functionality: fully functional, We are a provider of innovative solutions in the field of horizontal winders. Our state-of-the-art devices set new standards in the industry and enable efficient, precise and reliable stretching of long goods. Discover the versatile functions and first-class quality of our horizontal winders on our website, which offer you an optimal solution for your requirements. Fsdpfx Akjr Nc Tioyopn - Semi or fully automatic - Inner diameter: 515mm - Film width: 250mm - Minimum product length: 350mm

Condition: new, Type CSD-HT-BR 70 Fpedorxtuijpfx Akyjn Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: good (used), For sale: Fpjdpfxsua Dqij Akyon - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: new, overall weight: 4,500 kg, Year of construction: 2026, LONG REACH excavator arm 8m, 10m, 12m, 14m, 16m, 18m, 20m. 22m + BOAT POSSIBILITY OF PRICING FOR ANY MACHINE. POSSIBILITY OF PRICING FOR LENGTHS FROM 8M UP TO 22M BELOW OFFER FOR LONG REACH BOOM 16M FOR JCB JS 220 + BUCKET 0.6 M3 TECHNICAL SPECIFICATIONS Material: S355 steel Length: 16 m Maximum reach: "forward": 15.5 m Maximum digging depth: 11.2 m Weight: ca. 4500 kg Dipperstick capacity: 0.6 m3 All pins are hardened (to increase hardness above 50 HRC) 1 bucket cylinder, 6 pipes, 4 hoses, 8 pins, 5 grease lines, 1 set of couplings Fabra: KAISAI brand (colour can be selected) Hose: GATES brand All pins are equipped with grease nipples Fsdpsua U Acjfx Akyjpn All "pipes" are phosphated

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2022, Weight without rope 367 kg Weight with 70 m rope 406 kg Tractive force upper layer / 22.05 kn Operating pressure 150 bar required. Rope breaking force 90 kn Attachment Cat. I/II / Premium 1.5 m rope 70m / 10mm compacted 6 F-V Shield width 1.5 m Tractive force 4.5 / to medium se Fpedpfxsucqgcs Akyen

Condition: excellent (used), functionality: fully functional, Electric motor 90 KW - 1480 rpm Fedpfxeucwu To Akyepn 380 Volt. Gated motor.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Fpodpfx Ajtwb U Askyjn Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: used, Year of construction: 2001, Technical details: spindle passage: 25 mm Fpedstwglaepfx Akyjn Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at) or *