Used Kaiser Endoscope for sale (264)

Condition: ready for operation (used), functionality: fully functional, BEHR ST 150 / Vertical slotting machine with swiveling head - Stroke up to max. 175 mm - Head tilting in both directions, 5-8 degrees each - Table height / lower edge of ram guide: 260 mm - Rotary table diameter: 340 mm - Table longitudinal travel: 320 mm - 3 stroke speeds: 17-54-108 strokes per minute - Maximum slot width up to 26 mm - Feed in X/Y axes, speed adjustable - Rotary table adjustment manual - Three-jaw chuck Dimensions (LxWxH): 1.5x1.2x2 meters / Weight: 1600 kg Hsdpfx Afey R S Rve Ssu Errors and omissions excepted.

Condition: ready for operation (used), L&Z Lathe WEILER LZ 330 incl. new 3-axis digital readout (from educational facility) - "NEW" 3-axis digital readout - Center height 165 mm - Swing over bed 330 mm - Turning length 800 mm - Spindle speed range (gearbox) 25–2800 rpm - Automatic longitudinal/cross feeds - New Multifix toolpost with holders - Three-jaw chuck - Collet system with 20 collets - Original copy attachment - Various accessories - Documentation Hodpfx Afey Id Uhj Sou Dimensions (LxWxH): 1.8x0.7x1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: ready for operation (used), Vertical thread-rolling machine HENNING 03E -Henning - Metzingen -Year of manufacture 1981 -Rolling length approx. 1100mm -Motor power 3KW -Coolant system Hjdpfezkv Eusx Af Sju Dimensions L x W x H 0.7 x 0.5 x 1.7 meters / Weight approx. 450 kg Subject to errors and omissions.

Condition: ready for operation (used), ELB SWN 5 VA II Horizontal Surface Grinding Machine - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping area: 900x250 mm - Table longitudinal stroke: 10-625 mm - Maximum table load: 280 kg - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance from table to spindle center: 525 mm - Vertical feed rate: 2-180 mm/min - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system - Machine feet - Documentation - Complete technical data – see photos Dimensions (LxWxH): 2.7x2.2x2 m / Weight: 3500 kg Subject to errors and input mistakes Hjdpfey Dcpcox Af Sou

Condition: ready for operation (used), Year of construction: 2026, Optimum 275 N demonstration machine Model: Opti S 275 N Technical data: Hsdpfjztcydjx Af Sou Cutting range 0 degrees, round: diameter 225 mm Cutting range 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees, round: diameter 160 mm Cutting range 45 degrees: 160 x 160 mm / rectangle Cutting range 60 degrees, round: diameter 100 mm Cutting range 60 degrees: 100 x 100 mm / rectangle Saw bow lifting: manual Feed: steplessly adjustable Errors and omissions excepted.

Condition: ready for operation (used), Jungheinrich Electric Pallet Truck with Charger -Load capacity: 1000 kg Hjdpoztfh Rsfx Af Seu -Load center distance: 500 mm -Battery: 24 V / 200 Ah -Battery charger -Self-weight without battery: 1910 kg -Self-weight with battery: 2140 kg -Battery weight: 230 kg -Mast type: ZT (Telescopic mast) -Travel speed: approx. 6 km/h -Lifting height (mast): 1.6 m Dimensions: L x W x H: 2.5 x 0.8 x 1.2 meters / Weight: 2140 kg

Condition: ready for operation (used), AEG Double Grinding and Polishing Machine – Model DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. disc width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: L x W x H 1.2 x 0.4 x 0.9 meters / Weight 180 kg Errors and omissions excepted. Hsdpfx Afeztaw He Seu

Condition: good (used), KLOPP H 1000 – Planing machine - Planing length approx. 1000 mm - Planing width approx. 750 mm - Automatic feed Hedszfv Nvepfx Af Seu - Work table extension Dimensions: L x W x H 3.4 x 1.5 x 1.7 meters / Weight 3800 kg Subject to errors and omissions.

Condition: not inspected (used), Tool Milling Machine HERMLE UWF 802 M - Travel Control HS 401 - Travel X/Y/Z: 500x430x400 mm - Spindle speed range: 18–3550 rpm - Stepless feed on all three axes - Rapid traverse 0–1.6 m/min on all three axes - Vertical and horizontal milling device - Tool holder ISO 40 - Hydraulic tool clamping - Central lubrication - Drive power: 6 kW - Work lamp - Chip tray - Documentation Dimensions (LxWxH): 1.9x1.8x1.9 m / Weight: 1900 kg Hjdpfsy Ddz Hox Af Sju Errors and omissions excepted.

Condition: ready for operation (used), H. Hartkämper Coordinate Drilling Machine -Drive: 400 V three-phase -Drilling capacity in steel: approx. 16–20 mm -Spindle mount: MK2 / drill chuck B16 -Speed range: approx. 250–3,000 rpm (multi-stage) -Quill stroke: approx. 80–100 mm -Table size: approx. 1,300 × 600 mm -Travel in X: approx. 350–450 mm Hjdpfxoztc A Eo Af Seu -Travel in Y: approx. 180–250 mm -Base: integrated steel frame with storage compartments Dimensions: L x W x H 1.4 x 0.9 x 1.5 meters / Weight 350 kg Errors and omissions excepted.

Condition: excellent (used), 163 USED Konig Eco Twin 800 Roll Line. TECHNICAL DATA: - Kaiser roll line - Sliced ​​roll line - Long roll line - Croissant output - Koenig Rex Classic II 6-row divider-rounder. The price is a net price. Hsdpoxuqcvjfx Af Sju Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 1998, Fortuna bun line - used - year of manufacture: 1998 - automatic dough divider KM5/4 - pre-proofer with stamping station and cutting station - for production of Kaiser rolls, sliced, round buns, donuts - maximum output approx. 5,000 pcs/h - weight range 20–90 g - discharge of buns onto trays or depositing devices - computer control Hjdpfezn I A Tjx Af Sou - collection from warehouse - price on request

Condition: ready for operation (used), G & N Kugelmüller MPS 1 / Cup grinding machine from a university - Spindle speed approx. 3150 rpm - Grinding height above magnet approx. 130 mm - Magnet plate 200x100 mm - Lateral grinding wheel retraction mechanism - Fine feed adjustment - Drive motor 0.6 kW - Machine enclosure - Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.6 meters / Weight approx. 200 kg Errors and omissions excepted. Hsdpfx Aozn Rcpsf Seu

Condition: used, mileage: 131,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle Hsdpezz Tz Ijfx Af Seu * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: ready for operation (used), DECKEL FP 2LB, including a 3-axis digital display, from a university, in well-maintained original condition. Hsdpfezbi I Eex Af Ssu - 3-axis digital display "ACURITE" - Travel distances X/Y/Z: 795x300x400mm - Automatic feeds (18 speeds) / rapid traverses in all 3 axes - Spindle speed range: 40 - 2000 RPM (18 speed levels) - Vertical/horizontal milling capability - Swiveling vertical head with drilling quill - ISO 40 tool holder - Table surface (angular table): 1000x440mm - Table clamping surface with additional table: 1000x770mm - Coolant system - Various tool holders - Machine light - Documentation Dimensions: L x W x H: 2.5 x 2.4 x 1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2002, 725 USED Backtech bread roll line, model Primostar. Year of production: 2002. EXTERNAL DIMENSIONS (in cm): Hjdpfx Aferqik Uj Sju - W: 143, - L: 395, - H: 267. TECHNICAL DATA: - W: 40-110 g - signs: kaiser, daisy, cut. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN.

Condition: ready for operation (used), WMW Column Drilling Machine IIK 20 -Drilling capacity: 20 mm -Spindle speeds: 95 / 150 / 190 / 300 / 380 / 600 / 760 / 1200 rpm -Number of speeds: 8 -Gear shifting via 2 shift levers (A/B) -Manual feed -Right/left rotation -Coolant system -Machine light -Height-adjustable and swiveling drilling table with T-slots -Solid cast iron construction -Three-phase motor Dimensions: Hsdpfx Afeztfdfj Sou L x W x H 0.9 x 0.8 x 1.7 meters / Weight 420 kg Errors and omissions excepted.

Condition: ready for operation (used), HAGEN & GOEBEL / Internal thread cutting machine Hedpfx Afozu Nzwo Sju -Type HG 22 EB -Speed range 180 - 1120 rpm -Thread size up to max. M22 / steel -Thread size / cast iron up to max. M 27 -Thread size aluminum / brass max. M 33 -Smallest thread size M6 -Single stroke / continuous stroke -Table dimensions 600x500mm Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1000 kg Errors and omissions excepted.

Condition: ready for operation (used), ERD Column Drilling Machine Type B35/40 - Machine type: ERD B35/40 - Design: Column drilling machine with gear drive - Drilling capacity in steel: up to 50 mm - Spindle mounting: MK 4 (Morse taper 4) Hsdpfjztd Ivjx Af Seu - Quill stroke: 190 mm - Overhang (spindle to column): 325 mm - Column diameter: 140 mm - Table size: approx. 565 x 565 mm - Table adjustment: Height-adjustable, rotatable (360°) - Spindle speeds: 6-speed, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 rpm - Note on speed change: Change speed only when the spindle is running down - Feed types: Manual and automatic feed - Feed speeds: 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during operation) - Motor power: 2.2 kW (three-phase) - Supply voltage: 400 V Dimensions: L x W x H: 0.9 x 0.5 x 2.05 meters / Weight: 800 kg Errors and omissions excepted.

Condition: ready for operation (used), HAULICK slitting shear for rolled sheet metal / rotary knife shear -Max. sheet thickness: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Knife diameter: approx. 120 – 150 mm -Table size: approx. 500 x 250 mm -Overhang / feed area: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: belt drive -Straight cuts -Strip cutting Hjdpsztctwofx Af Sju -Endless cutting of sheet metal -Steel sheet up to approx. 2.5 mm -Aluminum and non-ferrous metals, correspondingly thicker Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 180 kg Errors and omissions excepted

Condition: ready for operation (used), VOEST DA 360 / Heidenhain digital display -Center height above bed: 400mm Hodpoza Dh Rsfx Af Sou -Turning diameter above bed: 800mm -Turning diameter above cross slide: 500mm -Turning length: 1000mm -Bar capacity: approx. 87mm -Spindle speed range: 14 - 1000 rpm / 18 spindle speeds -Automatic longitudinal / facing feeds -Automatic rapid traverse on Z-axis -Tailstock MK 5 -Collet chuck 250mm -Multifix base with inserts -Work light -Machine feet -Documentation Dimensions: L x W x H: 3 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: ready for operation (used), Tool milling machine DECKEL FP 3 with Heidenhain digital display - Well-maintained, original condition - Travel ranges X/Y/Z 500x300x400 mm - Feeds / rapid traverses in all 3 axes - Tool holder ISO 40 - Speed range 40 - 2000 rpm - Vertical / horizontal milling capability - Swivel table - Coolant system Hodpfx Aszcxtajf Sou - Central lubrication - Chip tray - Documentation Dimensions: L x W x H 1.7 x 1.2 x 1.8 meters / Weight 1350 kg Errors and omissions excepted.

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools -CE marking -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm -Documentation -400 Volt connection Hsdpfxjznu Sbo Af Sju Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: ready for operation (used), Grooving machine / Vertical, Type VS 600 - Rotary table diameter 600 mm Hjdpfeza Ulaox Af Sou - Rotary table - Indexable - Stroke approx. 360 mm - Three-jaw chuck 325 mm - Cross table Dimensions: L x W x H 1.9 x 1.2 x 2.3 meters / Weight 1700 kg Errors and omissions excepted.

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R -Turning diameter over bed: 300mm -Turning diameter over cross slide: 150mm -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch, etc. -Tailstock: MK 3 -Three-jaw chuck Hjdozbiyhspfx Af Sju -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.