Used Juki Lk-1900Bn Automatic Electronic Bart for sale (28,577)

Condition: good (used), Year of construction: 1975, turning length 1000 mm turning diameter over bed 430 mm turning diameter over slide rest 235 mm spindle turning speed range 11.2 - 2.000 U/min spindle bore 56.0 mm morse taper 4 MK quill stroke 135 mm bed width 333 mm spindle taper DIN 55022 Gr. 6 total power requirement 7.75 kW weight of the machine ca. 1950 kg From a maintenance workshop Good condition (!!) Features: Podpfjz I Uckex Angogu - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - "RSF Elektronik" digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - "FINN SAFETY" foldable chuck guard Type SPS 400 - Sliding tailstock * Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan

Condition: new, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Pgsdpfx Anoz E Il Tsgou Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing! Pgsdpfx Anez E Imqegou

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. Podpjz E In Isfx Angsgu With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. Pgodpjz E Iwijfx Angou With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Pgodpfxoz Iczuo Angju Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Pgsdpfxez Ic Nfe Angeu Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Year of construction: 2026, condition: new, functionality: fully functional, Automatic machine for large-scale production or as professional equipment. Automatic tilting system, with electric motorization Automatic Control Panel with TFT screen and PLC TECHNICAL FEATURES: Body made of AISI304 18/10 stainless steel. Pjdpjww Uagofx Angogu Bowl made of AISI304 18/10 stainless steel integrated into the body. Wheels to facilitate movement, 150 mm diameter. Adjustable legs. High-power industrial burner controlled by a digital device and temperature probe. Suitable for indoor and outdoor use. Also available in Electric models. Machine with oil filtration system and pump Automatic basket tilting system Optional motorized stirrer for perfect frying of the product on all sides. TFT screen with safety probe and temperature probe. On the TFT touch screen, you can make recipes, filtration, data collection. Insulation with high-temperature thermal blanket SUPERWOLL, Density 128kg/m³, thickness 13mm. Except for chimneys. Smoke exhaust chimneys and

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, actuation type: hydraulic, total height: 1,650 mm, total length: 2,495 mm, total width: 700 mm, overall weight: 780 kg, Equipment: CE marking, documentation/manual, Semi-automatic bandsaw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting precision. Robust bandsaw guides made with sealed guide bearings and adjustable tungsten carbide inserts. Blade tensioning achieved through manual rotation of the handwheel and guaranteed by an electromechanical device. Safety device to prevent accidents on the flywheel guard and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left, 60° right Adjustable stop for cuts of the same size Brush-type bandsaw cleaning device Hydraulic power unit motor: 0.55 kW Electropump: 0.06 kW for bandsaw cooling Vise, jaw height: 200 mm Vise, jaw length: 257 mm Work table height: 760 mm Machine weight: 780 kg Cutting capacity: -0-45-60° Solid round bar 0°: 150 mm Tubular round bar 0°: 350 mm Square bar 0°: 330 mm Pjdpfoz Nh S Aox Angsgu Rectangular bar 0°: 150 x 320 mm Solid round bar 45°: 150 mm Tubular round bar 45°: 310 mm Square bar 45°: 280 mm Rectangular bar 45°: 150 x 320 mm Vise opening: 420 mm Variable speed drive: 20-90 rpm

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Pjdpez Nhx Aofx Angsgu Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: used, mileage: 310,900 km, power: 350 kW (475.87 HP), first registration: 07/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: 4550 mm wheelbase * 1 lower comfort bunk * Stream Space cab * Trailer hitch 40D * High Performance Engine Brake * Auxiliary drive for tipper pump * 385/65R22.5 front axle tires, 10-12 mm tread depth * 315/80R22.5 rear axle tires, 10-12 mm tread depth * AP rear axles 13 t * Rear axle air-suspended * Airbag, driver's side, * Trailer brake 2 - line, * Audio system: Digital radio DAB / DAB+, * Exhaust pipe straight, above 2nd axle, * Battery 220 Ah, * Bi-xenon headlights, * CB radio, * Interactive cockpit multimedia system, * Air horns (2) on cab roof, * Cab: steel-sprung, comfort, * Remote Online remote query function, * Speed limiter, * Transmission: 12-speed - Type: G 330-12, * Power Shift gearbox * Electric lift roof, * Rear axle differential ratio 233, * Interior filter for construction vehicles, * Cooler box / refrigerator, * Reinforced engine brake, * Navigation system, * Parameterizable special module, * Frame overhang 1300 mm, * Reversing warning signal (audible warning outside), * Headlight cleaning system (SRA), * Rear crossmember reinforced, * Interface for fleet management system, * Driver's seat: comfort air-suspension seat, * Exterior sun visor, * Sun blind, side window, driver's door, * Front axle stabilizer, * Additional stabilizer, rear axle * Additional 12V / 15 A socket in the passenger footwell, * Additional 24V socket in the passenger footwell, * Door extension for cab, * Work light, rear wall of cab, top, * Preparation for 4 surround view cameras (display in the on-board monitor), * Preparation for additional headlights, * Auxiliary heater (water) * Emission standard EURO 6, * Axle configuration: 8x4/4, * Front axle load 7.5 t * Cab: L StreamSpace, 2.30 m, tunnel 170 mm, * Cab variant: StreamSpace, * Cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: roof height 600 mm, cab variant: L, * Stowage flap outside left, * Windshield tinted with band filter, * Preparation for CB radio, * Storage compartment above windshield with lid, * Storage compartments with lid behind driver and passenger seat, * Lower comfort bunk, * Preparation for upper comfort bunk, wide, * Drawers under bed, * Curtain for sleeping cabin, * Seats in cab: driver's seat backrest foldable, * Suspension: front springs 7.5 t, 3 leaves, * Electric window lift, * Urea tank (AdBlue): 25 liters, * Body/Superstructure: chassis for tipper, * Comfort locking system, * Fuel tank: 290 liters steel, left, * Multifunction steering wheel, * Air intake behind cab, * Air compressor 2-cylinder, * Heated air dryer, * Engine 12.8 L - 350 kW R6 Diesel (OM 471), * Engine variant OM 471, * Auxiliary drive MB 131-2c, * Frame lowering without bellows residual pressure control, * Ramp mirrors, * Waste heat recovery, * Disc brakes with full protection, * Disc brakes, front and rear axles, * Key with remote control (2), * Side marker lights, LED, flashing, * Seats in cab: passenger functional seat, * Front bumper corners in steel, Pgjdpsz Nbqksfx Angeu * Tachograph / EC control unit, * Daytime running lights, automatic, * Truck Data Center 7 (fleet management system), * Preparation for toll collection, * Preparation for Truck Data Center (fleet management system), * Water pump regulated, * Permissible total weight 32.00 t, * Oil cooler, transmission * and more * Subject to errors, changes and prior sale.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details cutting diameter 1000 mm saw band length 11100 mm cutting width 1100 mm total power requirement 20 kVA weight of the machine ca. 14 t dimensions of the machine ca. 5,4 x 3,2 x 3,9 m Additional information Cutting capacity: Ø 1000 mm, W 1100 x H 1000 mm min. Ø 400 mm, W 400 x 100 mm Face parallelism monitoring: optical display in mm Motor power – band drive: 11.0 kW Hydraulics: 3.7 kW Coolant: 0.36 kW Cleaning brush: 0.09 kW Band speed: 15 – 120 m/min (infinitely variable) Tank capacity: 115 l (hydraulics) 250 l (coolant) Saw band dimensions: 80 x 1.6 x 11,100 mm Space requirements: W 5366 x H 3215 x D 3863 mm Table height: 820 mm Weight: 14,000 kg – no foundation required Pgjdpfsz Iy Dysx Angsu Color: Red/black

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Pedpoz I D Atofx Angjgu

Condition: used, Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device Pjdpsz Ipcrefx Angjgu LBH-25AR, automatic butyl application machine, 2×7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria and can be seen in our warehouse on appointment

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Cutting range: - Round: 410 mm - Flat: 410 mm - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Cutting speed: - 12–110 m/min Equipment: - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Psdpfx Ansz Ii T Dsgsgu Saw drive: - 5.5 kW

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Podpfsz Dxr Iex Angjgu Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen

Condition: used, TORNOS DECO 2000/13 is a CNC automatic lathe engineered for precision machining, high accuracy and dependable reliability. Key capacities: 10 axes; max workpiece length 180 mm; internal spindle diameter 13 mm; spindle speeds 100-12000 t/min; back spindle 100-8000 t/min. Main specs: 50 Hz 3x400 V supply; spindle motor 2.2 kW; total power 11 kVA; weight approx. 2550 kg; footprint L2000×W1260×H1950 mm. Equipment: bar feeder IEMCA GENIUS 226/32, chip conveyor, coolant system, oil mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Pjdpfx Asz Dvztengogu

Year of construction: 2026, condition: new, The ProFruit Automatic Spouted Pouch Filler and Capper is a monoblock machine for automatically filling and sealing liquid and semi-liquid products in spouted pouches. Applications include fruit juices, smoothies, syrups, purées, baby food, sauces, condiments, honey, liquid detergents, soaps and cosmetics. Operation The machine automatically feeds the pouches and dispenses the caps for continuous production. A self-priming gear pump doses the product, after which nitrogen can be injected and the pouch is capped. PLC touchscreen controls allow the operator to adjust filling volume, operating speed and nitrogen-injection settings. Sensors prevent filling when no pouch is present and stop the machine if caps are unavailable. Capacity and features • Output up to 1,000 pouches per hour with 250 ml pouches • Filling range from 50 to 1,500 ml • Hot-filling capability up to 90°C • Automatic pouch feeding and cap dispensing • Nitrogen injection after filling • Adjustable handling for several standard spout sizes • PLC touchscreen control Technical specifications • Capacity: up to 1,000 pouches/h with 250 ml pouches • Filling range: 50–1,500 ml Pgjdpfxoz Nd Dne Angsu • Maximum filling temperature: 90°C • Pump: self-priming gear pump • Compatible spout sizes: 8.6, 10, 13 and 16 mm or larger • Gas injection: nitrogen after filling Hygiene and cleaning The machine is constructed from food-grade stainless steel for food-safe operation and straightforward cleaning.

Condition: new, Year of construction: 2026, Industrial Edge Banding Machine Pgodpoyb Rxljfx Angou The design of the edge banding machine ensures perfect application of 35 mm edge band tape, and supports workpiece thicknesses from 7.5 to 60 mm, covering a wide range of edge banding needs including situations such as missing corners or open spaces. It is also engineered for door panel structures with special configurations, allowing edge banding without requiring additional processing steps. Total power: 34.5 kW Minimum workpiece length: >= 120 mm Minimum workpiece width: >= 35 mm Workpiece thickness: 7.7 – 60 mm Edge band thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-side drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, which meet a variety of process requirements while offering maximum flexibility for individual batch production. The machine is equipped with an upper and lower drilling block, an ATC8 main spindle with 5.5 kW power, and a 2+8 tool changer magazine.

Condition: used, B&R 2005 CP152 / 10010792 / CP152.9 - compatible with all B&R 2005 controls - housing intact or renewed - removed from running machine - fully functional Pgsdpfxoimw Suo Angju manufacturer: B&R type: B&R 2005 spare part no.: 10010792 manufacturer no.: CP152.9 Dition: gebraucht

Condition: used, Sigmatek IPC Pentium 300CF- removed from Krauss Maffei KM 18 C3 - removed out of running machine - fully functionalmanufacturer: Sigmatek type: 300CF spare part number: 5 Pgedoltrptspfx Angju Dition: gebraucht

Condition: used, Sigmatek DEZ 181 / DIAS VDMA interface- compatible with NC4 control - removed from Demag ET 6 system - removed from running machine Pgjdpfx Aorr Efksngju - fully functionalmanufacturer: Sigmatek type: DEZ181 spare part no.: manufacturer no.: D Dition: gebraucht

Condition: used, Krauss Maffei IPC 5-133 for MC4 control system- removed from KM not testedmanufacturer: Krauss Maffei spare part no.: 5 Dition: gebraucht Podpfsrr Egwex Angsgu

Condition: used, Krauss Maffei SE502 MC4 sequence controller- removed from KM 18 C3 - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SE502 Pgodpfx Ansrr Eh Asgou spare part no.: 5 Dition: gebraucht

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine Pgjdpfx Aew Ah Nljngeu - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943