Used Injection Moulding Machines - Multi-Colour for sale (69,811)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg Pjdpozqam Aofx Ahcjra For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Pjdjyugalspfx Ahcsra Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2011, The grinding machine is in very good condition and fully operational. Predpfx Aoyuyucshcea

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Pedpfsznwq Tox Ahcsra

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Pedpfx Asxzklqjhcera Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Predpfx Ajzqabmshcea The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty Podpfxszk I T Rs Ahcsra ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43222, clamping force: 2,750 kN, screw diameter: 70 mm, injection pressure: 1,441 bar, total height: 2,500 mm, overall weight: 20,000 kg, For sale is a used machine from a site closure. Pedpfezrdhyjx Ahcera Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Podpex Avhyjfx Ahcora Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. Prjdpfezwg Tijx Ahcea The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Pedpozrwy Ajfx Ahcjra Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Predpfxezqbk Ne Ahcsa

Condition: good (used), Year of construction: 2000, Krauss Maffei KM 800-8100 injection molding machine Year of manufacture: 2000 Serial number: 8I181A5 Control system: Krauss Maffei MC4 Technical data Clamping force: 8000 kN (800 t) Screw diameter: 95 mm L/D ratio: 23:1 Injection volume: 3721 cm³ Injection weight (PS): 3386 g Injection pressure: 2172 bar Maximum cylinder temperature: 375°C Screw speed: 126 rpm Injection rate: 659 cm³/s Plasticizing rate: 112 g/s Nozzle closing force: 166 kN Clamping unit Dimensions of mounting plates: 1600 × 1530 mm Distance between columns: 1120 × 1000 mm Opening stroke: 1400 mm Minimum mold height: 600 mm Maximum mold height: 1100 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 59 kN (front / rear) Electro-hydraulic system Pump motor power: 110 kW Installed heater power: 61 kW Number of heating zones: 7 Number of dry cycles (EUROMAP): 560 cycles/h Oil tank capacity: 1500 l Motor current: 235 A Total current consumption: 455 A Main fuse: 2 × 250 A Equipment Control system: Krauss Maffei MC4 Robot interface: Euromap 12 Hydraulic cores: 4 pcs. Pneumatic valves: 4 pcs. Robot preparation: Yes Central lubrication system: Yes Prsdpozrw Adjfx Ahcsa Oil cooling system: Yes Dimensions and weight Length: approx. 10,600 mm Width: approx. 2860 mm Height: approx. 2410 mm Weight: approx. 47,000 kg

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t Pjdpfx Aozvwirshcora

Condition: excellent (used), Year of construction: 2018, 2018 Krauss Maffei PX 120-250 All Electric Injection Mold Machine Pedpfxszt Nxgj Ahcsra Clamping Force 120 tonnes (Approx. 1200kN). Tie Bar Spacing 470 × 420mm. Mold Platen Dimensions 680 × 610mm (Typical For The PX 120 Series). Opening Stroke 400mm. Maximum Mold Height (Min-Max): 200-550mm. Ejector Stroke 150mm. S/No. 61030113 (2018). With Piovan MDP2 Volumetric Doser, Piovan ETW12-P6 Temperature Controller & Husky H-C6-1-NE02-12 12-Zone Hot Runner Temperature Controller. Overall Dimensions L5.34 x W1.35 x H1.85m. Weight 7,900kg.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Linear robot including peripherals and safety fencing available. A used machine from a site closure is being sold. Sale excludes all warranty claims for defects. The machine has not been inspected but was operational until the end. Podpfozqagiox Ahcora

Condition: excellent (used), Year of construction: 2008, JSW J350AD Injection Molding Machine Electric injection molding machine Year of manufacture: 2009 Type: Electric injection molding machine Total installed power: 30 kW Clamping unit • Clamping force: 3440 kN • Distance between columns (H × V): 730 × 730 mm • Minimum mold height: 300 mm Podpfxszvwwvj Ahcora • Maximum mold height: 670 mm • Maximum mold opening stroke: 700 mm • Maximum ejector stroke: 152 mm • Maximum ejector pin height: 365 mm • Diameter of centering ring: Ø 160 mm • Dimensions of mold mounting plates (H × V): 1085 × 1085 mm Injection unit • Screw diameter: Ø 66 mm • Maximum injection shot weight for PS: 890 g • Maximum injection shot weight for PP: 767 g • Maximum injection speed: 160 mm/s • Maximum injection pressure: 1770 bar • Nozzle orifice diameter: 6 mm

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Spindle | CHUCK-10"-A2-6 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher HPC High-Pressure Coolant CABCOOL Pjdpfx Aozvy D Eohcjra NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Prodpfxjg Ailce Ahcoa Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation. Podpfx Ahsxzix Ascjra

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ Prsdpozvwl Tefx Ahcsa • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: excellent (used), Year of construction: 2015, Negri Bossi VH15000H-8400 Prjdpfxezt Nbbs Ahcea

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units Prodoxrmptepfx Ahcoa - 2 vertical units - 4 front-mounted units (two on each side)

Condition: excellent (used), CATALOG NUMBER 7762 TECHNICAL DATA THICKNESSER: - shaft width: 320 mm - 3-knife planer shaft - max thickness of the processed element: 180 mm - thicknesser shaft guard Psdpfxozh H Hko Ahcsra - from above: – anti-kickback fingers – feed shaft, toothed – planer shaft – outfeed shaft, smooth, feed CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade bore diameter: 30 mm - adjustable blade up/down - cutting width with fence: 270 mm - table dimensions: 750x460 mm - fence SPINDLE MOULDER: - spindle diameter: 30 mm - adjustable spindle up/down - spindle height: 100 mm - fence - extraction port diameter: 100 mm - dimensions (LxWxH): 1700x2400x1100 mm - weight: 340 kg ADVANTAGES – Bulgarian production – Very good condition – Multi-function, used Net price: 6,900 PLN Net price: 1,640 EUR at exchange rate 4.2 EUR (Prices may vary with larger fluctuations)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Prsdpfx Aezd Er Rohcea Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67