Used Ifm Pressure Switch for sale (19,873)

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Njdpfewbqrtox Af Solg Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch Nlsdjz Eavwepfx Af Sjg • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change Nedpsx A Unxjfx Af Sslg MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: excellent (used), Huber Unichiller 060Tw water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Equipment type: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: up to 6 kW Offered is a used Huber Unichiller 060Tw with a water-cooled refrigeration unit and Pilot ONE touchscreen control. The unit is designed for the precise cooling and temperature control of external closed circuits and is suitable for applications such as process cooling, machine cooling, laboratory applications, chemical processes, and technical and industrial systems. Technical data: Temperature range: -20 to +40 °C Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Cooling capacity at +15 °C: 6.0 kW Cooling capacity at 0 °C: 5.0 kW Cooling capacity at -10 °C: 3.1 kW Cooling capacity at -20 °C: 1.7 kW Power connection: 460 V / 3 phases / 60 Hz Max. current draw according to nameplate: 6.7 A Refrigerant: R507 Refrigerant charge: 1.2 kg Max. pressure: 25 bar CFC- and HCFC-free Circulating pump: C3 Max. flow rate: 122 l/min Max. delivery pressure: 5.6 bar Pump connection: G1 1/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption: approx. 70 to 330 l/h, depending on the inlet temperature Min. fill volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Control: Huber Pilot ONE controller 5.7" color touchscreen Graphical temperature display Program and ramp functions Digital level indicator Multilingual user interface Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Dimensions: Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Net weight: approx. 213 kg Equipment: Water-cooled refrigeration unit C3 circulating pump Pilot ONE touchscreen controller Stainless steel housing Stainless steel circulating pump Atmospherically open expansion tank Copper-brazed evaporator Digital level gauge Main switch Ethernet, USB, and RS232 interfaces Pt100 connection Cooling water and process connections Castors Connection hoses as shown in the pictures Shipping data: Dimensions: approx. 600 × 600 × 1450 mm Weight: approx. 213 kg net Shipping by freight forwarder possible. Scope of delivery: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures. Condition: Nsdpjzui Tgsfx Af Selg Used. Optical condition as shown in the pictures. The unit is available upon agreement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. Nljdpfx Afszukkgs Ssg The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t Nsdpfx Afexrby He Sslg ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Nledpfszui U Rex Af Ssg Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Njdpfx Afsz Ahrwo Sjlg Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication Njdpfezlcyuox Af Selg - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Speed range: adjustable from 0 to 758 rpm Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Nsdoyxg Dgepfx Af Sslg Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation Nlsdpfx Afoyluics Ssg PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge Nledpfx Afozvz Tbj Seg - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Nlsdpszv Ibfjfx Af Ssg Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Able to handle solid particles up to 500 microns (0,5 mm) It has a crack in the back left mounting foot (see picture)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Nljdpfx Afszhn Ngs Ssg . Please contact us for further information or to discuss delivery and installation options.

Condition: used, Year of construction: 2011, total width: 900 mm, total height: 1,640 mm, total length: 1,000 mm, Blasting cabinet SBC 350, manufactured in 2011. Cabinet model on a chassis with a front door, viewing window, and two round glove openings. Control panel with switches for Power, Light, and Dust, indicator lights, a pressure gauge, and an air pressure regulator. Hose and pipe connections on the side. Nledpfx Aozzn Txof Seg Technical specifications: - Year of manufacture: 2011 - Design: cabinet model on a chassis, front door with viewing window - Work openings: 2 glove openings - Control panel: Power / Light / Dust, pressure gauge, air regulator - Dimensions: approx. 100 x 90 x 164 cm The machine is sold in its current condition (used, from a bankruptcy, Apeldoorn, Netherlands). Dismantling, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing their own tools, lifting/loading equipment, and packaging. Inspection by appointment is possible.

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 600 mm, warranty duration: 12 months, input voltage: 400 V, total height: 1,250 mm, total width: 1,000 mm, total length: 1,080 mm, noise level: 65 dB, We offer Parts Washer PC 60/130 T for sale Catalogue number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us come with a 12-month WARRANTY. Equipment features: • Operating hours counter • Stainless steel safety grate • Swivel castors, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump performance: 4500 l/h • Connection power: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing/frame: Stainless steel (1.4301) • CE certified • Heater power: 4.5 kW • Maximum temperature: 80°C • Adjustable wash time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights displaying all working stages. The washing fluid temperature is maintained within the range of 35 to 80°C and is controlled via thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T operates without perishable rubber seals. Gas struts equipped with dampers guarantee effortless lid opening, while a ball valve enables easy draining of the cleaning fluid. The Kärcher parts washer operates in a closed-circuit system (using an electric pump) with a water-based cleaning solution instead of solvents, ensuring that the operator is not exposed to hazardous vapours. Nlsdpfswzwuzsx Af Sjg

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Nlodpoyfgrpefx Af Sjg Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: excellent (used), Year of construction: 2011, Pad printing machine TIC PCK4PM165PC Nlsdpfxjua Efns Af Ssg Inkjet printing machine, floor model, clear display with microprocessor control, electro-pneumatically controlled, with pad displacement, electro-pneumatically controlled, closed ink system, with integrated cleaning station, ink cup ø 140 mm, cliché size WxD: 4 x 150 x 320 mm, height-adjustable cross feed table via spindle, with lateral safety discs as well as emergency/off button and foot switch, required connection: compressed air 6 bar, 230V, 50Hz,pad contact pressure: 270 at 6 bar, second-hand, year of manufacture 2011, good condition.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Nlsdpsw Dcdysfx Af Seg Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Nlsdjynr E Tjpfx Af Seg Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel Nljdpfjynr Emex Af Ssg - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: used, Year of construction: 2017, Name: Used chamber filter press Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year built: 2017 Construction form: Side beam press Press content: 470 Liters Cycle: Open Filter area: 41,7 m2 Plate size: 800 x 800 mm Number plates: 41 Plate material: Polypropylene Plate transport: Automatically Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Empty weight: 4830 kg Technical doc.: Yes Message: It was used in electroplating. Accessories: A switch cabinet, a control cabinet, a hydraulic system, piston pump, a drip tray. Nodpfxex Swp Ho Af Sjlg Condition: Second hand Price: By request

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Njdpfx Afozichae Sjlg Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Electrical data: Nsdpoxxrc Sjfx Af Sjlg - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Machine dimensions: - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades Nedpfoyyzxhsx Af Solg - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!