Used Homag Drillteq H-600 for sale (62,926)

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Dwsdpfxszkivto Al Asc Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 110 kg, warranty duration: 6 months, KARCHER HDS 801 B PETROL HOT WATER WASHER Dwodpfx Ajzu Nizsl Asc This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. The highly efficient HONDA GX160 combustion engine ensures stable operation even during prolonged use. With operating parameters of 140 bar and 600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Discharge capacity (l/h): 600 Operating pressure (bar/MPa): 140 / 14 Maximum water supply temperature (°C): 80 Fuel consumption (kg/h): 4.1 Engine type: GX 160 Engine manufacturer: HONDA Weight (kg): 1110 Dimensions (L x W x H) (mm): 1168 x 862 x 767 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: new, Sarmax CHEYENNE SP2 600 Brush Aging Machine Dodpfxoyf Dclj Al Ajwc Working width: 600 mm Maximum working height: 300 mm Transport belt with adjustable speed: 3–15 m/min Includes: steel brush + tynex brush Total power: 9 kW Technical documentation CE certificate Brand new machine available on order

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x pallet rack beam, used Material color: similar to red-violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Locking clip: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams: 3,380 kg, with evenly distributed load. (Observe bay load limits) The beams feature a diagonal brace mounting! On each the left and right side of the beam end a bracket is welded on the locking clip edge! (Depth 90 mm – L: 50x50x5 mm) 02x safety pins, used Design: fully galvanized For securing the cross beams Note: The beams remain fully functional despite the holes! The beams come from an SSI project with heat protection panels that, according to the manufacturer, were bolted on! Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Dedpfxjykqrde Al Ajwc This item is only offered for collection. If transport or shipping is desired, this is subject to additional costs. Please inquire separately with us, specifying your delivery location and required quantity.

Condition: used, functionality: fully functional, machine/vehicle number: H2X388H00564, Year of construction: 2017, operating hours: 9,774 h, load capacity: 4,000 kg, lifting height: 3,200 mm, fuel type: electric, mast type: simplex, construction height: 2,850 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: H2X388H00564 Load centre: 500 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Dwodpjw Ez Uyofx Al Aoc Front tyres type: Superelastic Rear tyres type: Superelastic Battery voltage: 80V Sideshift, fork positioner, 3rd hydraulic valve, 4th hydraulic valve, front windscreen, full cab, interior mirror, windshield wiper,

Condition: excellent (used), Year of construction: 2023, Dual-fuel burner Elco 3980kw EKEVO 7.3600 GL Weishaupt Dedpfxewrlayo Al Ajwc

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,401 h, load capacity: 4,500 kg, lifting height: 4,406 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 3,050 mm, drive type: Elektro, Electric 4-wheel forklift Dwodpfx Aewtu Aasl Ajc Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery year of manufacture: 2019 Description: The vehicle will undergo a UVV inspection. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional charge. 3rd valve, 4th valve, front work lights, heater, full cab.

Condition: good (used), Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg Dwsdpfx Aexupnqjl Ajc

Condition: used, functionality: fully functional, machine/vehicle number: H2X387V05326, Year of construction: 2019, operating hours: 3,579 h, load capacity: 2,500 kg, lifting height: 3,490 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,150 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X387V05326 Load centre: 500 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Superelastic Rear tyre type: Superelastic Dedpfxoxn Ehmo Al Aswc Battery voltage: 80V

Condition: used, machine/vehicle number: 26017, Year of construction: 2018, operating hours: 11,902 h, load capacity: 2,500 kg, lifting height: 3,350 mm, fuel type: gas, mast type: simplex, construction height: 2,400 mm, Equipment: cabin, sideshift, .: 26017 Equipment Details: Year of Manufacture: 2018 Dwjdpfxev Upz Uj Al Aec Lift Capacity: 2500 kg Lift Height: 3350 mm Operating Hours: 11902 h Mast Type: Standard Mast Height: 2400 mm Length/Width/Height: 2670 / 1310 / 2220 mm Operating Weight: 4480 kg ---- Equipment: * Canopy * 3rd Valve * 4th Valve * Full Cab * Front Work Lights * Rear Work Lights ----- Attachments: * Sideshift ---- Further Equipment Information: Bluespot Flashlight ---- The operating hours are generally based on the readings. We would be happy to offer you the appropriate transport. Another 250-300 forklifts, attachments, and sweepers are available for immediate delivery. Also available for rent! We'd be happy to buy your old one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. The equipment is sold in its current condition, not refurbished, at the dealership. All information is provided without guarantee, errors, and changes excepted.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,713 h, load capacity: 3,000 kg, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, construction height: 2,824 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Dwodpfxox Hbq Do Al Asc Description: Price includes hydraulic fork positioner with side shift 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin,

Condition: new, Technical Data for the Base Plate: Racking System: SSI Schäfer Type: PR 600 Included in delivery: 01x Base plate, new Type designation: FT111 Suitable for frame profile width: 100 mm Material colour: RAL 5010 Gentian Blue Material thickness: approx. 6.00 mm Total width: 175 mm Total depth: 105 mm Number of mounting holes: 2 pcs Hole diameter: 13 mm Weight: approx. 1.06 kg | per unit Including the following fastening materials: 02x Hexagon head bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Dodpfxex Ekbcs Al Aowc Your contacts at our company: Mr Andre Evering Mr Mario Klöver Mr Falk Deutsch General information about this item: This item is only available for collection. Any transportation or shipping beyond that is subject to additional costs, which can be individually requested from us depending on the delivery location and quantity.

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. Djdpjxcnxdofx Al Aowc The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Dwodew Dy Rqepfx Al Asc

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TH 600 / 1050 / 11, overall weight: 35,000 kg, type of input current: three-phase, total height: 2,310 mm, total length: 4,400 mm, total width: 2,906 mm, input voltage: 380 V, feed length X-axis: 1,054 mm, feed length Z-axis: 651 mm, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 600mm Dwedpfx Aljw S In Ee Asc Chipping Width : 1050mm Rotor - Diameter : 1600mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 50-150 rm/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 400kW Voltage : 380-400V Geared Motors : 2 x 15kW Sew Eurodrive Infeed Rollers : 11 Pcs Feeding : Horizontal Drive : By Belt GT54 x 2

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,583 h, load capacity: 4,000 kg, lifting height: 3,446 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Dwedpfjw Tfqgox Al Ajc Mast type: Standard Technical condition: Good Front tyres type: Superelastic Front tyres condition: 20 - 40% Rear tyres type: Superelastic Rear tyres condition: 20 - 40% Battery voltage: 80V Battery type: PzS Battery year: 2018 Description: Vehicle will undergo a UVV safety inspection. Machine will receive a service and be cleaned prior to delivery. Painting available at extra cost on request. Sideshift, 3rd valve, 4th valve, front work lights, heater, road approval (STVZO), full cabin,

Condition: used, functionality: fully functional, We are selling a used Hako Hamster 600 sweeper in fully functional condition. Ideal for quickly sweeping yard, warehouse, and workshop areas. Robust, easy to operate, and ready for immediate use. Dwsdpfx Aloyrd A Se Asc

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: SSI Schäfer Type: PR600 Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 5010 Gentian Blue Dwodpfxjw Ayvks Al Aec INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 HK (hooks) Clear span: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load 02x Safety pins, used Version: completely galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Should you require transport or shipping services for this item, additional costs will apply, which can be provided upon request depending on the place of delivery and scope of delivery.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,700 mm, workpiece weight (max.): 500 kg, overall weight: 680 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 1,300 mm, table width: 600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 600 mm, height adjustment type: mechanical, input current: 20 A, pass-through width: 600 mm, Equipment: CE marking, documentation/manual, type plate available, Polish Deburring Machine – Direct from Manufacturer Dedpfxswzu A No Al Ajwc We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a trusted and experienced company specializing in metal and woodworking machinery. With decades of expertise and innovation, Madora is known for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial clients across Europe. Our machines are designed for precision, performance, and long-term reliability—all at competitive prices. The smallest model in the MADORA range, the GP 600 2Z, is a versatile deburring machine for cleaning sheet metal after various cutting processes. Equipped with two "Z"-type machining units, it offers outstanding flexibility and high machining capacity. The machine can perform two operations simultaneously: not only can it remove scale after plasma cutting, but it is also able to deburr or round the edges of workpieces after laser cutting—all in a single pass. Its machining width of up to 600 mm allows for the efficient processing of small and medium-sized components. With suitable tooling, the GP 600 2Z handles heavy edge rounding and oxide removal as well. The GP 600 2Z deburring machine features an electronic numeric control panel, which allows the operator precise and continuous adjustment of machining parameters such as workpiece height, feed rate, and tool rotation speed. Each machining unit can be controlled independently, giving the operator full flexibility to select the required process steps within a single pass.

Condition: used, Year of construction: 2012, operating hours: 1,861 h, functionality: fully functional, total length: 4,100 mm, total height: 1,950 mm, total width: 1,930 mm, pressure: 600 bar, empty load weight: 1,320 kg, fuel: diesel, overall weight: 1,800 kg, power: 36.5 kW (49.63 HP), temperature: 55 °C, SDAH industrial machine, high-pressure pump: + Woma + Ecotherm 600 + First registered: 21.11.2012 + 1,861 operating hours + 4-cylinder Kubota diesel engine, 2400ccm; 48 hp + WOMA high-pressure pump, 600 bar + 2 burners (1 burner disconnected) + 55°C heating temperature + Ball head coupling + Single-axle chassis + Tool box at the front + Storage compartment at the rear + 200l water tank + Foot switch + 2 x cable reel + connection cable + HD hose + Woma gun + 410cm x 193cm x 195cm (l x w x h) + Unladen weight: 1,320 kg; permissible GVW: 1,800 kg + High-pressure cleaner, from first owner Djdjzpycbopfx Al Aowc Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Crane rope: Demag wire rope Ø 16 mm -Length: 35.0 m Dsdpfozh Ehgex Al Aswc -Item no.: P 600 H13 4/1 589 440 44 -Rope type: IWRC U(bk) -other crane ropes also available -Transport dimensions: Ø 420 x 155 mm -Weight: 37.9 kg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,379 h, load capacity: 5,000 kg, lifting height: 3,926 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, drive type: Elektro, Electric four-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 40 - 60% Dwedpezbd Dhjfx Al Ajc Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2020 Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, joystick, LED.

Condition: used, functionality: fully functional, machine/vehicle number: 015047, Year of construction: 2019, operating hours: 3,500 h, load capacity: 5,000 kg, lifting height: 5,065 mm, free lift: 1,660 mm, fuel type: diesel, mast type: triplex, construction height: 2,676 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: 015047 Load center: 600 Mast type: Triplex Technical condition: very good Description: Find your forklift at STA-TECH! Whether you need a pallet truck, electric, diesel, or internal combustion engine forklift – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: ● Buying and renting forklifts and warehouse equipment ● Purchasing used equipment and logistics ● Manufacturer-independent service: repair, maintenance, inspections Dwsdpfozdlv Aex Al Aec 3rd valve, 4th valve, front work light, heater, full cabin, full free lift, joystick, LED, seat, - integrated side shifter - operating manual

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Dsdpfx Aszn Uv Hjl Aewc Lightly used. Ideal for keeping spare parts in stock.

Condition: like new (used), Year of construction: 2019, operating hours: 2,611 h, functionality: fully functional, machine/vehicle number: 7621, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, total height: 2,900 mm, total width: 2,400 mm, total length: 2,200 mm, table width: 900 mm, table length: 530 mm, type of input current: three-phase, input voltage: 400 V, workpiece weight (max.): 600 kg, distance table to spindle center: 600 mm, input frequency: 50 Hz, number of slots in tool magazine: 30, Equipment: documentation/manual, EXERON HSC 600/3 – a high-speed 3-axis CNC machining center, particularly suitable for the production of graphite electrodes. Djdpfxezrhd Sj Al Aewc The EXERON HSC 600/3 is a highly precise 3-axis CNC machining center, designed primarily for machining graphite electrodes. The machine is optimized for high-speed (HSC) machining with high dynamic performance on all axes. The robust construction with a portal and a polymer concrete bed ensures excellent vibration damping, maximum precision, and top-quality surface finish. The machine is equipped with digital drives for all axes, direct measuring systems with a resolution of 0.0001 mm, a high-frequency spindle for HSC machining, and a Heidenhain TNC 640 control system. Thanks to its compact dimensions, it offers a minimal installation footprint and excellent accessibility for operation and automation. The machine is in excellent technical condition, has been used very little, and is ready for immediate deployment in production.