Used Heilbronn Eccentric Press for sale (12,914)

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Nwjdpfx Agjy D Abfs Nsk Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Nwedpfx Asdzqddog Nok Good condition (very little use)

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm Njdpefx Hv Hofx Ag Nowk dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Nedsy Hqz Sjpfx Ag Nswk Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm Nwedpfxex Ura Se Ag Nek High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ram plate dimensions: 470x340 mm Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, 16T OPEN BACK ECCENTRIC PRESS Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location Nsdpfxjyrr E Ij Ag Nswk • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Nwodpoyg Ecpjfx Ag Njk Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Machine weight approx. 5,100 kg Further data and images available on request

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Njdpfx Agst Sgrue Nowk Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), pressing force: 100 t, table width: 670 mm, table length: 950 mm, punching force: 100 t, drop-through hole in table: 180 mm, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light barrier + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Application Areas - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • 4-sided slide guiding • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier hand and finger safety protection system • PLC control system Nwsdovtx Inopfx Ag Njk • Dual-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Uncoiler, feeder, and straightener • One set of custom die as requested • 8-sided slide guiding ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bolster–ram distance: 400 mm Slide–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchoring dimension: 710 mm Side anchoring dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are handled directly by CRONOSSTECH.

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination Njdpfjv Hin Eex Ag Newk - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm Nodpsy Nd Svefx Ag Newk ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: good (used), Year of construction: 1981, Machine parameters: Rated forming force: 250 t Nodpozpxzisfx Ag Nowk Stroke: 45 mm Description: The machine is in good technical condition; testing can be arranged upon prior agreement. Dimensions: 2580 x 1350 x 2975 mm Power requirement: 22 kW Czech documentation Machine weight: 12,880 kg

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector Nsdjtycdkopfx Ag Nswk - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP Nwjdpfjzc Rw Rjx Ag Nsk

Condition: new, Year of construction: 2025, power: 22 kW (29.91 HP), pressing force: 250 t, stroke length: 160 mm, table width: 700 mm, table length: 1,100 mm, throat depth: 350 mm, stroke adjustment: 150 mm, Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications Nsdpfx Agsx N Nfbs Nowk - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), pressing force: 300 t, stroke length: 200 mm, table width: 700 mm, table length: 1,200 mm, throat depth: 370 mm, stroke adjustment: 150 mm, Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, utilizing force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key advantages Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with centralized automatic lubrication Production-ready operation with PLC control + two-hand/foot pedal control Areas of application Nsdpfx Agsx N Nfhj Nswk Cold cutting and punching operations Cold forming applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-way guided slide system • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Ray barrier finger–hand protection safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies manufactured to required specifications • Eight-way guided slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Distance table–ram: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (stroke setting): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table bore diameter: Ø260 mm Table size: 700×1200 mm Die mounting hole diameter: Ø60 mm Ram size: 780×400 mm Table height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 SPM Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 125 t, table width: 700 mm, table length: 900 mm, drop-through hole in table: 210 mm, ram adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. Nodpfevxhqvox Ag Newk TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 315 t, stroke length: 300 mm, Equipment: CE marking, Table dimensions (x-y/mm)  2150 x 1200 Njdjzi Rbbepfx Ag Nswk Ram dimensions X-Y (mm)  2000 x 1200 Stroke (mm)  300 Slide adjustment (mm)  200 Strokes per minute  5 - 50 Side window dimensions (x-y/mm)  800

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 700 mm, table length: 880 mm, table height: 850 mm, drop-through hole in table: 200 mm, ram adjustment: 85 mm, stroke adjustment: 110 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Nsdpfx Agjvxhprj Nswk Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg

Condition: used, pressure 45 t throat 230 mm stroke 10 - 140 mm no. of strokes 80 Hub/min ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,7 t Nwodpfx Ageykb Ddj Njk

Condition: used, pressure 35 t throat 300 mm stroke 10 - 120 mm no. of strokes 110 Hub/min ram adjustment 50 mm Njdpjykb D Refx Ag Nowk total power requirement 3 PS

Condition: used, Year of construction: 1992, pressure 25 t Njdpfx Ajykb Dkog Nowk throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-800 Year: 2001 Condition: Used Stock number: 0392 Builder: Rovetta Slide force: 800 tons Number of driving points: 4 Slide stroke: 700 mm Slide adjustment: 350 mm Strokes per minute: 10-24 Die height (low stroke, high slide adjustment): 1,100 mm Usable distance between front posts: 4,200 mm Bolster table size: 4,000 x 2,000 mm Slide dimensions: 4,000 x 2,000 mm Movable table height: 600 mm Side window size: 3,400 x 1,900 mm Number of cushions: 1 Blankholder cushion - total force: 150 tons Lower blankholder cushion stroke: 250 mm Lower blankholder working area: 1,500 x 1,000 mm. Nsdpfx Ajyq Tdpsg Nswk

Condition: used, Year of construction: 1990, EBU 160t TYPE HK160F PRESSURE: 160t UP TABLE DIMENSIONS: 1000x500mm DOWN TABLE DIMENSIONS: 1200x800mm STROKES PER MINUTE: 80 STROKE LENGTH: 20-200mm DAYLIGHT: 600mm Nwsdpjzktzyefx Ag Nsk POWER: 15kw WEIGHT: 17,500 kg THE MACHINE IS IN EXCELLENT CONDITION AND READY FOR LOADING.

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-1500 Link Drive Year: 2001 Condition: Used Stock number: 0391 Manufacturer: Rovetta Number of strokes: 4 Ram force: 1500 tons Ram stroke: 763 mm Ram adjustment: 400 mm Daylight (bottom dead center, ram up): 1,200 mm Distance between front uprights: 5,700 mm Die bed dimensions: 5,500 x 2,500 mm Ram dimensions: 5,500 x 2,500 mm Moving table height: 600 mm Side window size: 3,400 x 1,900 mm Main motor power: 319 kW Blankholder (total force): 150 tons Nwedjyq Tdispfx Ag Njk Blankholder stroke: 250 mm Blankholder working area: 2,000 x 1,200 mm Strokes per minute: 8-24