Used Hansa-Flex Hd240T 1 1/2" for sale (107,023)

Condition: new, functionality: fully functional, Year of construction: 2016, Electric chain hoist with trolley, explosion-proof, type STK2008-10 1.6 4/2 - 1 ex, lifting speed 0.80 / 5.00 m/min, lifting height 4,500 mm, load capacity 1,600 kg Ncjdpfx Aoxcx Dqelnou

Condition: excellent (used), Year of construction: 1995, color: other, loading space volume: 25 m³, VAN HOOL 20FT ISO Tank Container 24,500L / 2 compartments Compartment 1: 12,500L Compartment 2: 12,500L IMO1 Bottom discharge Steam heating 2.5Y- + CCS test valid until 08-2028 = Further Information = General Information Year of manufacture: Aug. 1995 Model year: 1995 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Empty weight: 4,700 kg Payload: 29,300 kg Gross weight: 34,000 kg Nodpfxey Eqq Ij Alnjcu Functionality Body brand: Van Hool 24,720L TC, 2 comp. (11,950L/12,770L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) Ncedoy Auh Ijpfx Alnou * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: good (used), mileage: 812,271 km, power: 320 kW (435.08 HP), first registration: 08/2015, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2015, Equipment: AdBlue, central locking, cruise control, parking air conditioner, parking heater, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Rear working lights - Front working lights - Heated mirrors - Leaf suspension - Roof spoiler - Windscreen - Cab - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 - Cuppers 1-2-3 deck Livestock + Cuppers 3 deck trailer 2009 MY: 13-8-2015 / 18-2-2009 KM: 812271 XLRASH4100G073990 / XL9VA101092053008 76-BGG-7 / 83-WD-LH APK/TUV: 24 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoas Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 Cupper 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swinging floorboards Folding roof 3 decks Fans Remote control release = Further Information = Technical details Nodpfxjymaqnj Alnscu Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: air suspension Rear axle 2: Tyre size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: air suspension Weights Unladen weight: 14,507 kg Payload: 13,493 kg Gross vehicle weight: 28,000 kg Functional Body brand: ZF Maintenance, history, and condition APK (MOT/TUV): valid until 08.2026 Technical condition: good Visual condition: good Identification Registration number: 76-BGG-7 Further information For more information, please contact VAEX The Truck Traders.

Condition: ready for operation (used), machine/vehicle number: 64532, used, manually hydraulic pipe bending machine available bending segments: 3/8, 3/4, 1 1/4 and 2" Ncodpfx Aljdzw Hwenou space required: 850 x 640 x 780 mm

Condition: excellent (used), Ml Io = 10.4/12.8 A 60/100 k Mn 4.0 Nm S1 3000/min Ui = 150 V IEL 63 IM B5 / P64 I.CLF VDE 0530 PTC thermistor 3 ~ 1 x FU 1050-6HF 13.3 mVmin Ncsdpod Atrrofx Alnou equipped with a HEIDENHAIN rotary encoder.

Condition: excellent (used), Mo = 14.0/18.5 Nm Io = 31.0/39.5 A Mn = 14.0 Nm Speed S1 3000 rpm Ncjdpfxsd Atrxe Alnou Ui = 150 V 3 ~ 1 FU 1050-GF 13.5 mVmin Space requirement: 220 x 140 x 200 mm Equipped with HEIDENHAIN rotary encoder.

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist Nedetlzdqjpfx Alnecu -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg Nedpfx Aeq Tvpxolnscu -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg Nedstnlz Uepfx Alnocu -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Main stroke/fine stroke: 8.0/2.0 m/min -Lifting height: approx. 9.0 m -Drive unit: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm -Weight: 226 kg

Condition: excellent (used), functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 25,410 kg, overall weight: 36,910 kg, axle configuration: 3 axles, first registration: 01/2008, suspension: air, tire size: 385/65R22.5, color: silver, Year of construction: 2007, Equipment: ABS, tail-lift, For sale: Professional livestock semi-trailer by Gray Adams, model GAdd3T/4, year 2007. The trailer has seen little use, is fully operational, has undergone a recent inspection, and is ready for immediate operation. =====•••••===== NOTICE! Option to purchase the entire set together with the 3-axle tractor MAN TGX 28.480 (6x2 drive), which the trailer was paired with. 2014 MAN model with extremely low mileage—only 268,000 km! Well-maintained, continuously serviced, ready for operation, Euro 5 standard. The tractor is equipped with a spacious, comfortable cab, leather seats, two beds, coffee maker, and electric sunroof. Price for tractor unit only: €12,900 net Discounted price for combined set: €45,900 net We offer delivery of the entire set to any address in the EU or to a port under preferential conditions! =====••••===== Gray Adams specialist trailers are robust and reliable designs, engineered for transporting cattle, horses, and other livestock. A new trailer of this type cost over 900,000 DKK (~600,000 PLN net ≈ €130,000), reflecting the high build quality and durability of the Gray Adams brand. =====•••••=====•••• Technical data – trailer: Brand/Model: Gray Adams GAdd3T/4 Year of manufacture: 2007 – in service since 2008 Transport dimensions: 13.6 m (L) × 2.55 m (W) × 4.0 m (H) Unladen weight: 11,500 kg Payload: 25,410 kg Gross vehicle weight (GVW): 37,000 kg Axles: 3 axles (including 1 steering axle) Suspension: air suspension Landing legs: JOST Tires: 385/65 R22.5 (approx. 60% tread) Brakes: disc brakes – components (S-cams) replaced in June 2021 Certification: CE Design and purpose: - Two-deck trailer – ideal for transporting larger quantities of animals - Full hydraulic system – safe and convenient operation - Remote-controlled hydraulic aluminum lift - Integrated water system – ensures optimal conditions for transported animals - Durable build and materials ensuring longevity Technical condition: - Trailer rarely used, maintained in very good condition - Regularly serviced – all maintenance performed promptly - Fresh inspection – fully roadworthy and ready for use =====••••===== Additional equipment: - Remote-controlled hydraulic lift - Integrated watering system - Complete documentation and CE certificates - High-quality components (JOST, pneumatic system, disc brakes) - Metallic paintwork =====••••===== Why choose this offer? - Top brand: Gray Adams – world leader in livestock trailer manufacturing - Durable and reliable construction – designed for intensive use Ncodexc Hzqspfx Alnju - Recent inspection – guaranteed operational status - Very competitive pricing compared to a new unit (over 900,000 DKK!) - Ideal solution for livestock breeders, farmers, and transport companies

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, wheelbase: 9,300 mm, Year of construction: 2011, Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 12,920 kg Payload: 26,080 kg Gross vehicle weight (GVW): 39,000 kg Maintenance APK (main technical inspection): valid until 08/2026 Condition Ncjdpjyza Hmefx Alnju Overall condition: very good Technical condition: very good Visual condition: very good

Condition: used, 2 clamping plates, 1 pair of clamping rails with T-slots Clamping block, press table, auxiliary table with T-slots Length per clamping rail: 900 mm Width per clamping rail: 295 mm Thickness per clamping rail: 130 mm - 6x T-slots, 30 mm Nsdpsxf Uwlefx Alnscu - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All sides machined surfaces Net weight per clamping rail: 240 kg Net weight of both clamping rails: 480 kg Good condition

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing Njdpfx Alsuxfu Nsnecu - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2011, tire size: 385/55/22.5, Year of construction: 2011, Lifting roof Separate floor/two-cylinder system Independent operation Remote control = Further information = Tyre size: 385/55/22.5 Rear axle 1: Steered; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 2: Tyre tread left: 65%; Tyre tread right: 65% Unladen weight: 10,800 kg Technical condition: very good Visual condition: very good Nedsyxw A Tjpfx Alnscu

Condition: used, This is a rack trolley from the premium manufacturer Rational, suitable for the XXL model combi-steamers SCC/CM/CMP in the 20-2/1 GN size. Ncodeypcfyopfx Alnsu RRP (gross): €2,400, our special price: €1,495 (gross) You will receive an invoice including VAT. Service: We are happy to assist you in arranging a certified Rational customer service technician. Looking for a specific Rational model? Contact us—we have access to a wide range of new and used equipment. We are glad to advise you on all device types. Our used equipment service for you: • 6 months warranty on electrical parts (limited to replacement of defective components, excluding labor costs) • High-quality branded equipment at fair prices • Professional refurbishment, inspection & expert cleaning • Inspected & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice before and after your purchase • Provision of user manuals, wiring diagrams, and spare parts • Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): 772 x 1,016 x 1,717 mm Clearance, lowest tray to cooking chamber opening: 50 mm Clearance, highest tray to cooking chamber opening: 87 mm Max. loading height: 1.60 m 20 tray slots 2/1 GN With container lock Accessible from both sides U-rails 4 tandem swivel castors (2 with brakes – metal parts made from stainless steel) Removable and drainable drip tray Rail spacing: 63 mm Weight: 65 kg Material: Stainless steel Item no.: 60.22.086 Capacity: 20 x 2/1 GN roasting and baking trays, racks 12 x H6-1/1 chicken grill racks (up to 1,500 g) 12 x H8-1/1 chicken grill racks (up to 1,300 g) 12 x H10-1/1 chicken grill racks (up to 950 g) 40 x 1/1 GN, 20, 40, 55 mm deep 12 x 1/1 GN, 65, 90, 100 mm deep Use for other containers: 1/1 GN, 2/4 GN crosswise Corrosion-resistant stainless steel (CNS 1.4301) Condition: Used Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by prior arrangement Subject to change and error. Do you have questions, need advice, or would like to view the item in person? You can reach us by phone during our opening hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Year of construction: 2006, condition: like new (used), Built in 2006 Condition like new! Nsdpfxsd Hr Ncs Alnscu

Year of construction: 2025, condition: used, functionality: fully functional, machine/vehicle number: E22SJ25083247515, ATTENTION! DEMONSTRATION UNIT WITH REMAINING WARRANTY UNTIL 08/2027 ASK ABOUT YOUR TERMS AND CONDITIONS! The iCombiPro is the latest combi-steamer from RATIONAL. The iCombiPro 20-2/1 electric model with 20 GN 2/1 shelves or 40 GN 1/1 shelves is easy to operate, even for untrained staff, as it delivers outstanding food quality without the need for supervision. The ultra-fast intermediate and self-cleaning functions keep your unit sparkling clean. The RRP is €36,580 net. MAINTAIN LIQUIDITY – LEASING / HIRE PURCHASE POSSIBLE! ASK FOR AN INDIVIDUAL, NON-BINDING OFFER! Service: We are happy to refer you to a certified Rational service partner throughout Germany. Our equipment service for you: Manufacturer warranty until 08/2027 High-quality brand equipment at fair prices Professional and competent advice before and after the purchase Flexible choice of shipping or pickup Provision of user manuals, wiring diagrams & spare parts Trade-in of your combi-steamer from model year 2004 Complete range of accessories at attractive prices The iCombi Pro from Rational sets a new standard in intelligence, efficiency, and flexibility. TECHNICAL DATA: W x D x H: 1082 x 1052 (1117 including door handle) x 1807 (1872 including vent pipe) mm Power supply: V: 400 / Hz: 50-60 / kW:67.9 Weight: 263 kg Serial number E22SJ25083247515 FEATURES: Energy efficient: 60% lower energy consumption thanks to state-of-the-art thermal insulation Self-cleaning: The unit cleans itself fully automatically via an integrated program Operation possible without additional water softening system or extra descaling FURTHER INFORMATION: Temperature range: 30°C to 300°C Detects current cooking chamber conditions Recognizes the size, loading quantity, and product condition to determine browning Learns commonly used cooking routines and implements them Calculates the ideal cooking path for the desired result MyDisplay – individually configurable, user-specific control interface TFT color display and touchscreen User and operation manual accessible on the device display Core temperature probe with automatic error correction for incorrect insertion and positioning aid Glazed door compartment for energy savings LED interior lighting Includes energy consumption display Humidity control: precise humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps each Steam injection adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling Nodeymmwzepfx Alnjcu 5 programmable air speeds Integrated, maintenance-free grease separator (no additional grease filter required) Cool-down function: rapid cooking chamber cooling Automatic adaptation to installation site (altitude, climate, etc.) Appliance door with ventilated triple glazing and swiveling inner pane Waste water fixed connection according to SVGW permitted Splash and jet water protection IP X 5 Separate solenoid valves for soft and hot water up to +30°C SHIPPING: Delivery or pickup by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h Nedpsyvrwtefx Alnscu

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm min. module: 0,1 mm Ncedpfx Aoxxl Sgslnsu total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Year of construction: 1993, condition: good (used), machine/vehicle number: 931216, Technical specifications: - Edge grinding machine for edge finishing on - welded boxes, cabinets, safes, etc. - SIEMENS control for indexing and oscillation - max. grinding height approx. 1200 mm - grinding belt dimensions 100 x 2240 mm - grinding belt speed 12 + 24 m/s - grinding unit can be swiveled - 2 magnetic clamping plates - motorized grinding dust extraction - pneumatic connection 6 bar - power supply 400 V Nodpfx Aloggbmasnecu - space requirement approx. W 2500 x H 2000 x D 2000 mm - weight approx. 1500 kg

Condition: good (used), functionality: fully functional, For sale is a copy milling machine from Makre Franz Kuhlmann KG, GM 1/2 series. The machine is fully functional and ready for immediate use. Technical specifications: X-axis (longitudinal travel): 330 mm Y-axis (transverse travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet bores up to 8 mm possible Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to help you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Ncedpfx Alowal Dhoneu Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC Njdpoh N Di Defx Alnocu - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator Ncsdpfx Aoxm Ullolnju - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Condition: used, 1 Pair of Transport Dollies, Platform Trolleys, Transport Carts GORR 1 pair = 2 transport dollies, each equipped with 4 swivel castors Load capacity per dolly: 1000 kg Platform size per dolly: 1050 x 255 mm Material thickness of support plate/platform: 4 mm Nsdoxcixlepfx Alnjcu Overall height: 145 mm Wheel diameter: 100 mm Wheel width: 37 mm Load capacity per fixed castor: 300 kg - Each dolly has 4 swiveling fixed castors with white polyamide wheels, bolted to the support plate - Each dolly is equipped with two fixed castors with brakes - Steel support plate as the platform surface with reinforced side edge Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per dolly: 17 kg Net weight (pair): 34 kg Used, in good condition Pricing per pair = 2-piece heavy-duty dollies Included in delivery are 2 of these universally and flexibly applicable heavy-duty transport dollies. Currently 50 pairs in stock. Both dollies together offer 8 swivel castors and a combined load capacity of up to 2 tonnes. Our customers use them to transport squared timber, boards, planks, and sawn lumber. Others use them for moving angle steel, beams, and heavy pipes in the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machinery skates, material dollies, or machine moving gear.