Truck chassis - tipper chassis

Ford Trucks Belux 3542D - 6x4 - Garantie 1+1 jaar

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Rcedportnccofx Apdsh

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines Rcjdpfx Aoua Tbwspdeh The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 Rcodpfx Ajx Hwhxjpdsh - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Rcsdpfxotu Hy Ej Apdoh Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: used, x x Rcjdpfoip Rdlex Apdeh x dismantled x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/5 UNITS AVAILABLE • Manufacturer: Hüffermann • Model: LL101s • Year of manufacture: 2002 • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm Redpfx Apswaap Eedjch • Internal dimensions: 7.4 m x 2.42 m x 2.95 m • External dimensions: 7.52 m x 2.55 m x 3.185 m • Floor: 3 mm S235 steel sheet • Sides: 3 mm S235 steel sheet • Rear side: 3 mm S235 steel sheet • Doors: twin-leaf • External colour: RAL 1226

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Rjdpfxew A Ruqo Apdech Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: like new (used), Multi-stage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg Redpfx Aefz D Dnepdoch

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Rodpfx Aoy Tlzaopdoch

Condition: used, functionality: unexamined, Year of construction: 1963, Used double-shaft hammer crusher KRUPP DHB 1604, feed opening approx. 1600 x 1480 mm, capacity up to 400-500 t/h, final grain size 0-30 mm, max. feed size 1000 x 800 x 500 mm. Particularly suitable for the cement industry, for processing moist materials such as limestone, clay, marl. Weight approx. 60 t. Rjdpfxoxcxrzs Apdjch