Used Haitian V10 for sale (284)

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 105, part no. 344 980-02, SN: 11934821A, offered on an exchange basis (exchange service). The unit has been professionally overhauled, fully tested, and is supplied with a 3-month warranty. 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your returned defective core must not have any mechanical damage such as breakage, as these are not repairable. In the event of such damage, a surcharge of €400 including VAT will apply. Lsdpfsx Etkgjx Abzeag

Condition: ready for operation (used), Heidenhain UV 105 power supply ID 344 980-13 SN 12989796, professionally overhauled and tested, with 3 months warranty, good preserved condition, 100% functional, delivery as per photos. Laodpfxox Etive Abzjg

Condition: ready for operation (used), Heidenhain UV 105 converter Id. 344 980-13 SN:12193676, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Lodpfx Asx Etlkjbzeag

Condition: ready for operation (used), Fanuc A06B-6127-H202 SV 10/10HV module SN V11128664, used, in good condition, 100% functional, scope of delivery as per photos. Lasdpex Erdrefx Abzsg

Condition: ready for operation (used), Fanuc A06B-6127-H202 module SV 10/10HV SN V11129626, used, minor signs of wear, 100% functional, delivery as per photos Ledpfx Ajx Erdxebzoag

Year of construction: 2008, condition: excellent (used), machine/vehicle number: C0851000161, Equipment / Additional information: Laedpfx Ash Eu Sfebzjg Ultimate pressure: 150 hPa(mbar) Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: used, YALE Electric Chain Hoist Crane Type CPV 10-8/20-4 Serial No.: VC 000876 S Year of manufacture: 2010 Laedpjx Urb Nefx Abzeg Load capacity: 2,000 kg Hook travel: 4.1 meters Lifting speed: 4 m/min Distance suspension to load hook: 550 mm Pendant cable length: approx. 2 meters 2 fall chain = 2,000 kg Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Emergency stop - Suspension eye on crane top - Without trolley Weight: 65 kg Good condition

Condition: new, DEMAG hoist motors / crane motors / travel motors / drive motors: 1. Hoist motor type - MBV 132 C 12/2 - 1 piece (new). 2. Hoist motor type - MBV 100 A 12/2 - 1 piece (new). 3. Hoist motor type - ZNK 100 A 8/2 - 10 pieces (new). 4. Hoist motor type - ZNK 80 A 8/2 - 1 piece (new). 5. Travel motor type - ZBF 90 B 8/2 - 2 pieces (new). 6. Travel motor type - ZBS 80 b 12 - 8 pieces (new). 7. Travel motor type - ZBA 132 AL B050 - 1 piece 8. Travel motor type - KBA 80 B4 - 1 piece (new). 9. Traction motor type - KBA 90 B4 - 2 pieces 10. Traction motor type - ZBA 80 A4 - 2 pieces 11. Lifting motor type - 24/14 K4 P - 1 piece 12. Lifting motor type - 13/6 KF2 - 1 piece Lodpfx Abju U Uznjzsag 13. Lifting motor type - 13/6 L4 - 1 piece 14. Traction motor type - 13/6 KF 8-2 - 2 pieces

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine - fully functionalmanufacturer: B&R Lasdpfx Aep Rb Iasbzjg type: 1022 manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: überholt

Condition: used, swing diameter 475 mm centre height 510 mm width 110 mm loading area 360x310 mm diameter of quill 80 mm bearing diameter 75 mm Wheel width 36,5 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Ledpfxeyqux Ij Abzjag

Condition: ready for operation (used), Heidenhain UV 105 ID. 344 980-13 SN13442060, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos, used, in good condition, 100% functional, delivery contents as shown in photos. Lsdpfx Abox Eti Nezsag

Condition: ready for operation (used), Heidenhain UV 105 ID. 344 980-13 SN13343360, professionally completely overhauled and tested with 3 months warranty, 100% fully functional, delivery contents as per photos, used, good condition, 100% fully functional, delivery contents as per photos. Lasdsx Eti Ajpfx Abzog

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 105, part number 344 980-13, serial number: 1334360, offered on an exchange basis (Exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. Scope of delivery as shown in the photos. Laedex Etkyjpfx Abzsg Please note: Under the exchange procedure, your defective return unit must not have any mechanical damage such as fractures or breaks, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: ready for operation (used), You are bidding on a Heidenhain UV 105 Inverter, part no. 344 980-13, serial number 13442060, offered in exchange (exchange service). The unit has been professionally overhauled, fully tested, and comes with a 3-month warranty. It is 100% functional. Scope of delivery as shown in the photos. Laodpfxsx Etk Hj Abzjg Attention: In the exchange process, your returned defective part must not have any mechanical damage, such as breakage, as these are beyond repair. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Laedpfx Ajt Ixkzsbzjg

Condition: good (used), Year of construction: 2020, Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter Lsdsxn Ia Sepfx Abzsag -Manufacturer: Lenze, frequency inverter Inverter Profinet -Type: I55AE175F1AV1000LS -Max. power: 0.75 kW -Input: 3/PE AC 400/480V 3.3/2.8A 50/60Hz -Output: 0-400/480V 2.4/2.1 A 2.2 kW 0-599 Hz -Number: 5x inverters available -Price: per piece -Dimensions: 130/60/H210 mm -Weight: 1.1 kg/piece

Condition: new, operating hours: 15 h, YCM NXV1020A, spindle: SK40/12,000 rpm, control: Siemens 828D, tool changer: 30-fold, X:1020mm Y:520mm Z:540mm, coolant system: IKZ20bar, chip conveyor Lasdporutazjfx Abzjg

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction Laedpfx Abowk Ittezjg The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: ready for operation (used), Year of construction: 2001, operating hours: 6,023 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 8,000 rpm, number of axes: 4, TECHNICAL DETAILS Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Table length: 1,150 mm Table width: 500 mm Tool holder: BT40 Main spindle power: 11 kW Max. spindle speed: 8,000 rpm MACHINE DETAILS Control: CNC Fanuc 18-M Number of axes: 4 Power: 15 kW Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,500 mm Net weight: 5,000 kg Shipping units: 1 Operating hours: 6,023 h EQUIPMENT Laodpfx Aey Hh Iiobzsg Chip conveyor External cooling Tool magazine

Condition: excellent (used), Year of construction: 1997, Manufacturer SAEILO (Germany) Model CONTUR TV 1000 Year of issue 1997 Control system HEIDENHAIN X/Y/Z-axis movement 1016 / 610 / 508 mm Table size 1080 x 580 mm Max. Table load 600 kg Tool change 40 Spindle taper SK 40 Cutting feed speed X / Y / Z 0.25 to 5080 mm/min Rapid traverse X / Y / Z 20000 mm/min Rapid traverse Z 1500 mm/min Spindle speed 5-8000 rpm Spindle power 11 / 16.5 kW Ledpfjugltxjx Abzjag Machine weight 6000 kg

Condition: used, functionality: fully functional, Charger Condition: Ready for use and fully functional Technical condition: good Description: Chargers - Still single-phase 1 x24V / 145A 1x 24V / 100A Further 2,500 chargers available (24V / 36V / 48V / 80V). All chargers also available individually - price on request The device is visually in a normal and technically in a good condition. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Errors and prior sale excepted, sale only to tradesmen... every sale of used goods is subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Ledpeuu Ur Iofx Abzsag

Condition: refurbished (used), functionality: fully functional, Year of construction: 2026, machine/vehicle number: Hitachi HPV102HW, Rebuilt Hitachi HPV102HW main pump complete with gearbox and pilot pump. Service exchange unit. New parts: - Bearings - Cylinder blocks and valve plates - Head cover - Drive shafts - Seal kit Regulators are for Hitachi Zaxis 180W and Zaxis 210W. Also suitable for: Hitachi Zaxis 200, Zaxis 210, Zaxis 250, Zaxis 280 Hitachi EX215, EX255, EX285 Hitachi EX200-5, EX220-5, EX250-5 Laodpfsyg Ip Ssx Abzog

Condition: new, functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, spindle speed (max.): 10,000 rpm, XV 1060 Control SINUMERIK 828 D - ShopMill with 15.6" touch screen Clamping surface 1,160 x 600 mm, number of T-slots: 5 X-axis: 1,000 mm, Y-axis: 600 mm, Z-axis: 650 mm Min. distance spindle nose - table: 130 mm, max. 780 mm Laodpoxugyqofx Abzjg SK 40 taper, spindle max. speed 10,000 rpm Double-arm tool changer, 24 tools Standard features: - Rigid tapping - Swiveling operator panel - Sliding door with interlock - Viewing windows in work area enclosure - Control cabinet with heat exchanger - 2 LED work area lights - 3-color machine status indicator light - Portable electronic handwheel - Central automatic grease lubrication for all linear axes and X, Y, Z ball screws - Power-off after program end - Compressed air at main spindle for chip removal - Chip flushing system with rinse gun - Spindle cooler for 10,000 rpm - Air gun - Coolant nozzles at spindle - Work area lighting on/off switch - 1 set of leveling elements - Electrical system in accordance with VDE regulations

Condition: used, Technical details: x-travel: 1000 mm y-travel: 600 mm z-travel: 650 mm control: Siemens 810D shopMill distance spindle /table: min 130mm / max. 780 mm number of spindle speeds: 10000 U/min. spindle taper:: SK 40 tool changer with: 24 Plätze table-size: 1160 x600 mm interface: ja Weight approx.: 5,45 t Lodpfx Abjyfgiuezeag Machine YOM in 2007 / only put into operation in 2009! 4th axis Oil mist extractor *

Condition: used, gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, bevel gear motor type KF87 DV100M4 -Speed: 9.6 rpm -Translation: i 147,32 :1 -Power: 2.2 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 740/420/H390 mm Laodpfxouxg Iws Abzog -Weight: 132 kg