Used Goulds G&L Series Ssv for sale (78,340)

Condition: used, mileage: 114,000 km, power: 350 kW (475.87 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Arocs 2648 /6x4/ TRUCK CRANE/MOUNTING CRANE/ROOFER CRANE!! GERMAN VEHICLE, all inspections performed at Mercedes Benz, original paint Ijdpfjzu Du Ssx Abnetk CRANE MKG/HMK 401 HPA 4 L/ wire rope winch, remote control 26 m fully hydraulic - 900 KG, plus 2 x mechanical up to 31 m - 400 KG. Axle load front axle 9.0 t, trailer brake 2-line, audio-navigation system Bluetooth comfort, exhaust downwards to the right, battery 220 Ah, air horn, electrical pre-wiring in the cab 24V / 100 A, suspension: rear leaf springs 2x13.0 t, suspension: front leaf springs 9.0 t, 4 leaves, parking brake additionally on front axle, luggage compartment on the upper part of the rear wall, transmission 12-speed - type: G 330-12, transmission lock for auxiliary drive, rear lights construction site version, info display 12.7 cm with video function, fuel tank: 390 L steel, left, air intake on the side of the cab, engine brake reinforced, auxiliary drive MB 124-10c, configurable special module, spare wheel, pipe breakage protection brake system, reversing warning acoustic (warning signal outside), rear cross member reinforced, drawer under dashboard, seats in the cab: armrest passenger seat, seats in the cab: driver's seat comfort suspension seat, sun visor outside, sun protection roller side windows, driver and passenger door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on front axle), steel rims 9.00x22.5, socket 12V additionally, socket 24V in the passenger footwell additionally, stone guard grille, carpet on the engine tunnel, door extension for the cab, preparation for CB radio, preparation for reversing camera, front axle straight, ground clearance increased, additional thermal insulation, auxiliary heater (water), two-disc clutch Emission standard EURO 6, axle configuration: 6x4, trailer socket 24V / 15-pole, Arocs, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting device hydraulic, cab: L StreamSpace, cab variant: StreamSpace, cab: steel-sprung, comfort, storage compartment outside left, storage compartment outside right, lifting roof electric, windshield tinted with band filter, preparation comfort bunk above, wide, curtain sleeping cabin, seats in the cab: driver's seat backrest foldable, suspension: leaf spring / leaf spring, power windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 L, rear axle bevel gear 233, interior filter: pollen filter, body/superstructure: chassis, comfort bunk below, comfort locking system, steering pump unregulated, air compressor 2-cylinder, air dryer heated, engine 12.8 L - 350 kW R6 Diesel (OM 471), engine compartment encapsulation, ramp mirror, waste heat recovery, disc brakes with partial protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger multi-function seat, stabilizer rear axle, stabilizer front axle, socket cab 24V, tachograph / EG control device, underrun protection rear fixed, preparation toll collection, water pump regulated, permissible total weight 26.0 t, oil cooler transmission.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Isdpfoy Swi Hox Abnjtk Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Year of construction: 2007, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-SOLO -Drive motor: 2.2 kW Itedpfx Abszn H Syenok -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 21,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 1,185 mm, total height: 3,040 mm, total width: 4,100 mm, overall weight: 15,000 kg, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, product length (max.): 7,800 mm, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. Ijdpfjyfv Rbox Abnotk - Guide Way Type: Roller guide ways- Main Spindle: - Drive Power (100% ED): 21 kW - Drive Power (40% ED): 28 kW - Spindle Speed Range (100% ED): 5000 rpm - Spindle Speed Range (40% ED): 5000 rpm - Base Speed: 850 rpm - Torque max. (40/100% ED): 240 / 320 Nm - Drive Type: AC/1, Integrated Spindle Motor 76 - C-Axis Speed: 5000 rpm - C-Axis Torque: 320 Nm - C-Axis Resolution: 0.001 deg - Chuck Diameter: 200 - 315 mm - Bar Capacity max.: 65 mm - Spindle Flange: Flachflansch 170 h5 - Spindle Bore Diameter: 80 mm - Clamping Cylinder Bore Diameter: 67 mm - Diameter in Front Bearing: 120 mm- Tool Spindle / Milling Spindle: - Tool Holder: HSK63-A - Spindle Speed max.: 12000 rpm - Drive Power (100% / 40% ED): 13.2 / 22 kW - Torque (100% / 40% ED): 60 / 100 Nm- Spindle 2 (Counter Spindle - option): - Drive Power (100% / 40% ED): 21 / 28 kW - Speed max.: 5000 rpm - Chuck Diameter: 315 mm - Bar Capacity max.: 65 mm- Working Range / Turning Diameter: - Swing diameter max.: 640 mm - Turning diameter max.: 520 mm - Turning diameter over counter spindle max.: 400 mm - Turning diameter over counter spindle & turret max.: 250 mm - Turning diameter over tailstock max.: 400 mm - Spindle distance: 1500 mm - Turning length (short / long): 1175 mm - Workpiece weight chuck parts (flange weight) max.: 150 (100) kg - Workpiece center of gravity from spindle flange max.: 200 mm - Workpiece weight shaft parts with tailstock max.: 800 kg- Slide Travel: - Slide 1 (top): X1 = 550 mm, Y1 = 180 mm, Z1 (short/long) = 1185 mm, B1 = 240 deg - Slide 2 (option): X2 = 180 mm, Z2 (short/long) = 1050 mm - Slide 3 (counter spindle): Z3 (short/long) = 1150 mm- B-Axis: - Swivel speed max.: 30 rpm - Torque B-Axis (S6-40%/max.): 2860 / 5720 Nm - Resolution B-Axis: 0.001 deg - Clamping hydraulic (at 30 bar): 2000 Nm- Tool Magazine: - Number of tool pockets: 36 - Tool weight max.: 8 kg - Tool length max.: 400 / Ø80 mm - Tool length max. with free space: 250 / Ø125 mm - Tool diameter standard: Ø80 mm - Tool length max. without free space: 230 / Ø80 mm - Turning tool f-dimension standard: 40 mm - Turning tool f-dimension with free space max.: 62.5 mm - Tilting moment tool standard max.: 60 (100) kg/cm - Lifting movement: 85 mm- Turret 2 (Option): - Driven Tools Equipped: Yes - Number of tool stations: 12 - Shaft diameter acc. to DIN 69880: 40 mm - Number of driven tools: 12 - Drive power (max. 100% ED): 10.7 kW - Torque (max. 100% ED): 32 Nm - Speed range: 4000 rpm - Indexing time (30/180 deg.): 0.34 / 0.64 s - Tool load max.: 100 kg - Permissible imbalance due to tool loading: 63 Nm- Feed Drives & Rapid Traverse (Schlitten 1, 2, 3): - Rapid traverse X/Ys/Z (Slide 1): 40 / 24 / 70 m/min - Feed force X/Ys/Z (Slide 1, S6-40%): 7 / 11 / 7.5 kN - Travel resolution X/Ys/Z (Slide 1): 0.001 mm - Ball screw X (Slide 1): Ø32 x 20 mm - Ball screw Ys (Slide 1): Ø40 x 15 mm - Linear motor Z1-Axis: 1FN3600-4WB00 - Rapid traverse X/Z (Slide 2): 24 / 36 m/min - Feed force X/Z (Slide 2, S6-40%): 9 / 11 kN - Rapid traverse Z (Slide 3): 36 m/min - Feed force Z (Slide 3, S6-40%): 13 kN- Coolant & Chip Conveyor: - Coolant capacity: 370 l - Drive power: 0.

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 Ijdpfxeum Hufj Abnjtk * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: used, Year of construction: 2003, operating hours: 4,935 h, Equipment: all wheel drive, * hydr Schnellwechsel * Standart Schaufe Itodjmcxguepfx Abnsk * 3. Steuerkreis * Arbeitsbeleuchtung * Straßenbeleuchtung * 4 Zylinder Perkins 700 Motor * 1 Hebelbedieung * 5800 kg GG * Heizung * Breit- Reifen 20 Zoll 90-60% * Perkins 700 Serie 4 Zyinder Motor * deutsches Fahrzeug * 1. Hand * Betriebserlaubnis * Declaration of Conformity * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt Verkauf nur an Gewerbe Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Transport zum Hafen möglich Besichtigungen nur nach Vereinbarung WhatsApp

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Iodpfsxfbczox Abnotk

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon Itedoxwtu Topfx Abnek

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, Iodpfx Ajzuyprobnetk with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, operating hours: 8,000 h, Orderly machine Liebherr L 514 Z Stereo Stereo Loader (articulated steering + rear axle steering – extremely manoeuvrable!!!) Year of manufacture: 2010 Original operating hours: 8000 Chassis number: VATZ 1115CZB025518 Tyres 17.5 x 25 at 40% (with nails + screws – but still airtight!) Power: 72 kW (98 HP) Isdpfx Abey R Ib Donotk Total weight: 10,500 kg Air conditioning 3rd hydraulic control circuit for auxiliary equipment such as high-tip bucket, bucket with clamp, silage block cutter, etc. 2 work lights on the cab roof, front Battery isolator switch, comfort driver's seat with suspension Warning beacon at rear of cab (top) Road registration Hydrostatic travel drive with 2 speeds Width: 2400 mm Net price including hydraulic quick coupler and 1.6 cubic metre bucket: €36,500 Additional equipment available at extra cost: 5-ton pallet fork from €2,190 High-tip bucket from €3,250 Volume bucket All prices are net ex stock plus 19% VAT or for export! We are happy to offer transport to your location. Sale exclusively to commercial customers or for export. Sold as seen, in its current condition. No warranty or guarantee. The specified mileage or operating hours are as read from the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided does not represent warranted characteristics. The description and the details provided serve only for general identification of the vehicle and do not constitute a guarantee as defined by sales law. The information does not claim to be complete. The specifications/descriptions and photos are non-binding and do not constitute warranted characteristics. Only the arrangements in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typographical or data transfer errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are also happy to take your vehicle in part exchange. For further questions, please feel free to contact us. For our international customers, we handle all customs and export documents for smooth overseas delivery.

Condition: used, Year of construction: 1999, 1. EWD Log Processing Line BHZ (Timber Processing Center) Log handling Cable winch Cross conveyor Cable winch EWD H84 Infeed with FZ1 debarking unit EWD FZ3 Debarking unit, 2 x 75 kW EWD EVW Roller bed EWD FR22 T4 Saw with a cutting height of 330 mm, 4 x 80 kW EWD SK Splitting wedge Complete automatic log handling system Complete electrical system and controls Complete hydraulic system 2. EWD Edger Line FR9 T2 Cross conveyor Singulator Alignment roller conveyor Itjdpjzt Hzlsfx Abnek Cross conveyor Slabber saw Edger infeed with plate measurement Edger FR9 with ripsaw Splitting wedge Transfer cross conveyor Side product sorting

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Travelling steady Itjdpfx Aoy D Talobnok 3 jaw chuck manual All manuals present

Condition: as good as new (ex-display), Year of construction: 2010, Independent 2nd injection unit DEMAG Multi-plug 80 L for mounting from the side of IMM. Lab machine " like new " Itsdpfx Asiwx T Ejbnsk

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Itodpfx Absztrbksnjk

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet Itodpszung Ejfx Abnjk >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: excellent (used), Year of construction: 2017, JUSTSEN/DANSTOKER Heating unit Max Heating output : 1 MW Alloweble pressure : 4,0 bar Alloweble temp : 110 celcius Test pressure : 6.0 bar Itodpezr E Hqefx Abnek Volume : 2200 litre Water cooling foundation Can be used for : Wood waste/wood chips/wood pellets etc. Electric cabinet with PLC touch screen Complete unit, still connected to power, can be examined in working condition on demand.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) Itsdpszt A H Refx Abnsk 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 1,800 kg, permissible axle load (axle 2): 1,800 kg, permissible axle load (axle 3): 1,800 kg, first registration: 09/2004, total width: 2,300 mm, wheelbase: 4,330 mm, Year of construction: 2004, Maximum front axle load: 1,800 kg Rear axle 1: Max. axle load: 1,800 kg Itodey H Ek Ijpfx Abnok Rear axle 2: Max. axle load: 1,800 kg Unladen weight: 1,080 kg Payload: 2,420 kg Gross vehicle weight (GVW): 3,500 kg Technical condition: good Optical condition: good

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine Series -Model: L-9060 -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm. -Minimum Material Length: 145 mm -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm. Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm. Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Itsdpfxehwb U Te Abnek Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard. Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm

Condition: excellent (used), Year of construction: 2019, Wide-belt sanding machine Manufacturer: Houfek Type: SPB 910 Buldog 5 Year of manufacture: 2019 Sanding width: 910 mm Sanding belt: 2,200 x 1,010 mm Workpiece thickness: 3 - 160 mm Sanding motor power: 11 kW Feed rate: 4.5 / 9 m/min Feed motor power: 0.55 / 0.75 kW Sanding belt speed: 18.5 m/sec Iodpfx Ajztrk Sobnjtk Weight: 1,210 kg

Year of construction: 1997, condition: ready for operation (used), A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible. Itodpfxszdum Ro Abnok

Condition: good (used), Year of construction: 2017, MOTAN Gravicolor 30 GRAVInet Stock No.: 503694 Machine Type/Equipment Type: Dosing unit Manufacturer: MOTAN Type: Gravicolor 30 GRAVInet Year of Manufacture: 2017 GRAVICOLOR precisely mixes and doses up to six materials, ensuring the highest level of recipe accuracy. These modular, gravimetric dosing and mixing units are specifically designed for injection molding, blow molding, and extrusion applications. Regardless of recipes, materials, or the application environment, IntelliBlend continuously analyzes all process data and, through self-optimization, always achieves the best possible operating point. The highest level of recipe adherence results in the best and most consistent product quality. Itjdpszrg Euofx Abnok

Year of construction: 2023, condition: ready for operation (used), A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible. Iodszhb Hlepfx Abnjtk

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,245 mm, spindle motor power: 9,400 W, total height: 2,100 mm, total width: 2,150 mm, overall weight: 8,330 kg, product length (max.): 7,250 mm, number of axes: 7, This 7-axis Index G300 L YB was manufactured in 1999. It features a maximum turning diameter of 270 mm and a maximum swing diameter of 590 mm. The machine includes a robust tool system with 12 stations and a milling spindle speed of up to 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Index G300 L YB horizontal turning machine we have for sale. Contact us for further details. • Power supply: 3 phase / 50 Hz • Rated voltage: 400 V • Control voltage: 24 V • Rated current: 120 A • Rated power: 67 kW • Electrical cabinet weight: 710 kg • Spindle bore: 65 / 90 mm • Spindle bearing diameter (front): 110 / 140 mm • Spindle nose: ISO 702/1 size 6 / 8 • Chuck diameter: 200 / 250 / 315 mm • Maximum turning diameter: 270 mm • Maximum swing diameter: 590 mm • Power (100% duty cycle): 19 / 28 / 43 kW • Power (40% duty cycle): 28 / 40 / 57 kW • Torque (100% duty cycle): 120 / 178 / 275 Nm • Torque (40% duty cycle): 178 / 255 / 363 Nm • Maximum speed: 5000 / 3500 rpm • Counter spindle bore: 65 / 90 mm • Counter spindle bearing diameter: 110 / 140 mm • Counter spindle nose: ISO 702/1 size 6 / 8 • Counter spindle chuck diameter: 200 / 250 / 315 mm • Counter spindle power (100%): 19 / 28 kW • Counter spindle power (40%): 28 / 40 kW • Counter spindle torque (100%): 120 / 178 Nm • Counter spindle torque (40%): 178 / 255 Nm • Counter spindle max speed: 5000 / 3500 rpm • Minimum distance between spindles: 20 mm • Longitudinal travel: 770 / 1310 mm • Rapid traverse: 22.5 m/min • Rapid traverse X: 24 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 24 m/min • Tool system: VDI 30 • Number of tool stations: 12 • Max boring bar diameter: 50 mm • Milling spindle speed: up to 6000 rpm • Milling spindle power: 9.4 kW • Milling spindle torque: 19 Nm • Tailstock stroke: 630 mm • Tailstock quill diameter: 125 mm • Tailstock force: 7500 N Itodpjyyyy Djfx Abnek • Hydraulic tank: 165 liters • Coolant tank: 300 liters Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), HR-Heligaron T image intensifier CXI-3000 Series & CXI-5600.532-1.024 FOV + CV-M4+CL camera, used, minor signs of use, 100% functional, scope of delivery as per photos Iedpfjl Ecimjx Abnotk