Used Gildemeister N.e.f. 1020 for sale (825)

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm Bjdpfx Ash N Thwjmrjln -Total weight: 794 kg

Condition: good (used), Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm Blsdpfxeb Hw Dbo Amron -Weight: 62 kg

Condition: good (used), DC motor, servo motor, motor, electric motor -Speed: 3000 rpm -Power: 0.4 kW -Electricity: 65 V -Design: B14 -Shaft diameter: Ø 14 mm Blodpfxob Ilxgo Amrsn -Dimensions: 210/160/H160 mm -Weight: 6 kg

Condition: used, power capacity 0 kW volt 0 V ampere 0 A new motor with options G45 und K42 Data please see typeplate. Bodpfjd Ihahox Amroln

Condition: used, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Load capacity: 700 kg -Platform: 2610 x 1000 mm Blodpfx Asfhk Tysmrsn -Roller conveyor: 500 x 2610 mm -Roller spacing: 230 mm -Roller diameter: 40 mm -Dimension retracted: 490 mm -Extended dimensions: 1260 mm -max. stroke: 770 mm -Hand switch -Quantity: 1 piece available -Transport dimensions: 2610/1020/H490 mm -Own weight: 558 kg

Year of construction: 1994, condition: good (used), machine/vehicle number: 9067/94-216119 , Palletfeeder SBP.M 66.2 6 Pockets 2 Folding Knives 1 Side Pocket Up to 32 pages folding Blsdpofh Nq Tsfx Amrsn Largest Sheet Size X : 780 mm Largest Sheet Size Y : 1020 mm Min. Sheet Size X : 140 mm Min. Sheet Size Y : 180 mm

Condition: good (used), Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 Bodpfxjcpbwbo Amreln -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

Condition: new, Year of construction: 2026, neu 2026 090203 prompt, Zwischenverkauf v Türkei 3810 € 1 1020 mm 1.5 mm 500 mm 1950 mm 1000 mm Blsdpsyz Dc Ejfx Amrjn 1150 mm 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 56 mm, turning length: 345 mm, turning diameter: 380 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, overall weight: 4,200 kg, torque: 72 Nm, travel distance X-axis: 166 mm, travel distance Z-axis: 339 mm, 2 DMG Gildemeister CTX 210 for sale: One from 2007 and one from 2006. Model V2 Very few spindle hours. CNC Siemens 840D, 12-position turret VDI 30. Bjdpfx Amoyw Ndtjrjln Supplied with some tooling + documentation for each machine. Test possible by appointment.

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Blodpezc Efcofx Amrsn Injection Unit Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Condition: used, Year of construction: 2008, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,400 °C, inner dimension length: 400 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 1,020 mm, total width: 810 mm, total height: 1,510 mm, overall weight: 400 kg, Equipment: CE marking, 4 units of electrically heated chamber furnaces, manufactured by Thermconcept. Type: KC 64/14 Blodpfx Amezmfvnoron Maximum temperature: 1400 °C Internal dimensions: 400 x 400 x 400 mm (W x D x H) External dimensions: 810 x 1020 x 1510 mm (W x D x H) Volume: 64 l Power: 15.0 kW Current consumption: 22 A

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,230 mm, total width: 2,200 mm, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,550 mm, number of axes: 3, This 3-axis Wele CV-1060 was manufactured in 2016. It features a table size of 1150 x 600 mm and impressive X, Y, and Z-axis travels of 1020 mm, 600 mm, and 600 mm, respectively. The machine is equipped with a 24-tool ATC magazine and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Wele CV-1060 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 600 mm • Rapid traverse (X/Y/Z): 36,000 / 36,000 / 36,000 mm/min • Electrical: 400 V, 30 kVA, 3-phase, 50/60 Hz, power line 22 mm² Additional equipment • Chip conveyor: screw type (coclea) • High-pressure coolant through spindle: 15 bar • Tool presetter: automatic contact type Bedpfszmgrdjx Amreln Technical Specification Taper Size BT 40

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Bsdpfozl Dngex Amreln Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg

Condition: used, Year of construction: 2016, Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle, Bjdpfx Amoza Eaherjln coolant system, stepless adjustable working rate, machine light. 1 sawblade mount. Circular saw blade diameter: 165 - 630 mm Tooth pitch: 3 - 50 mm Saw blade thickness: 2 - 6 mm Working speed: continuously adjustable from 24 - 50 z/min. Grinding wheel diameter: 25 and 30 mm Grinding wheel width: 0.3/0.4 and 0.5 mm Connected load approx.: 0.4 kW (400 V / 50 Hz) Weight approx.: 210 kg Dimensions W x D x H approx.: 1020 x 900 x 1620 mm colour: light grey RAL 7047

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Polished bending rail Bsdpfoyyl Nksx Amroln Weight: approx. 1000 kg

Condition: used, Technical specification as per original manufacturer: Also available: Coil unwinder Straightener Littell cutter Exit station for disqualified material Stacker A Stacker B Blodpfxsyzbdms Amron LTG bundle turner Technical details: Max sheet length: 1200 mm Max. sheet width: 1020 mm Min. sheet width: 610 mm Sheet thickness range: 0.13 mm – 0.50 mm Max. coil weight: 13.5 tons Max. pallet stack weight: 2.5 tons Production capacity: up to 100 - 120 meters per min.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, Bsdpfeyv Iqvjx Amrsln the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Bsdjzf T I Nepfx Amrjln Tool holder : SK 50 In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm Blsdpszk E Irefx Amrsn

Condition: excellent (used), Working travels 1020 x 530 x 560 mm Table size 1200 x 500 mm Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 32 Pos. Blodpfx Amezmdd Dersn Control FANUC 0i-MC With cooling through spindle With chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 510 mm, table load: 800 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Chevalier QP2440-L was manufactured in 2013. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1200 x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the Chevalier QP2440-L vertical machining centre we have for sale. Contact us for further details. • Main Voltage: 400 VAC / 3 PH / 50 HZ • Power Required: 20 KVA • Air Required: 5.5 kg/cm² • Table Dimensions: 1200 x 600 mm • Tool Taper: BT 40 / SK 40 • Automatic Tool Changer (ATC): 24 positions (Arm type) • Rapid Feed Rate (X/Y/Z): 36 / 36 / 24 m/min Technical Specification Bljdpjy Exbqjfx Amrjn Taper Size BT 40

Condition: used, Year of construction: 1992, FORMATTING BAND SAW WITH HYDRAULIC FEED, PANHANS 690 Year of manufacture: 1992 In working condition Data according to brochure: Table size 750 x 1200, height 860 Blsdozr Hncopfx Amrjn Maximum cutting height 140 Largest saw blade diameter 450 Cutting length 2800 Space required 3500 x 5600 Weight 950 Price is ex works.

Condition: good (used), Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, cutting height (max.): 1,020 mm, cutting width (max.): 1,020 mm, control type: manual, pivoting range: 45 °, Saw frame with double column guide Saw band dimensions: 9500x54x1.6 mm Infinitely variable band speed: 20-100 m/min Cutting capacity at 0° round: 1020 mm Cutting capacity at 0° square: 1020 mm Cutting capacity at 0° flat: 1020x1020 mm Cutting capacity at 45° round: 675 mm, square: 675 mm, flat: 675 x 1020 mm Work height: 535 mm Hydraulic motor: 2.2 kW Main motor: 7.5 kW Coolant pump motor: 0.12 kW Length: 4500 mm Width: 1700 mm Height: 2800 mm Weight: 7500 kg Hydraulic vice Hydraulic band tension Stepless speed adjustment Linear guides Blsdey Hlfrjpfx Amrjn Height adjustment via optical sensor Automatic saw frame lift after completion of cut Sensitive cutting pressure regulation Coolant pump Saw band Chip brush Operating manual in GERMAN or ENGLISH Hydraulic bundle clamping device Chip conveyor Rotary table for mitre cuts around the machine

Condition: new, Year of construction: 2025, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 65 mm, rapid traverse X-axis: 1,200 m/min, rapid traverse Y-axis: 1,200 m/min, rapid traverse Z-axis: 1,200 m/min, total length: 800 mm, table width: 400 mm, overall weight: 1,550 kg, ELMAG Tool Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and cost-effectiveness, sure to impress any metalworking professional. This top ergonomic design offers easy operation, stepless speed control, and outstanding value for money, making it ideal for workshops, training centers, and toolmaking. Standard Features: - Digital position display - 4 long milling arbors: 16, 22, 27, 32 mm - 3 reducing sleeves: MK 1, 2, 3 - Operating instructions / CE certificate Advantages: - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw drive on all axes X/Y/Z - Infinitely variable feeds on all axes - Coolant tank integrated into the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED worktable illumination - Vertical milling head with adjustable quill - Includes central lubrication system - Digital spindle speed display - Rapid traverse on all 3 axes - Swiveling milling head +/- 45° - Swiveling control panel - Digital position display for maximum precision on all 3 axes - Spindle rotation clockwise and counterclockwise - Digital speed display - Potentiometer for stepless feed axis control - Selector switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop switch Blsdpfx Asy Hlx Esmrjn Technical Data: Drilling capacity in steel: 50 mm Face milling capacity: 125 mm End milling capacity: 40 mm Spindle taper: ISO 40 Speed range: 40 - 2000 rpm Speed settings: stepless Quill stroke: 65 mm Table T-slots / width × spacing: 6 / 14 × 63 mm Vertical table T-slots / width × spacing: 3 / 14 × 63 mm Spindle nose to column distance: 180 - 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Spindle nose-to-table distance: 50 - 450 mm Horizontal spindle-to-table distance: 145 - 545 mm Milling table size: 800×400 mm Table travel X × Z: 500 × 400 mm Vertical table surface: 1020 × 225 mm Feeds X/Y/Z: 10 - 1200 mm/min Feed rates X/Y/Z: stepless Motor power: 3,700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Power supply: 400/50 V/Hz Machine dimensions: 800×400×450 mm Length × width: 1500 × 1700 mm Height: 2000 mm Weight: 1,550 kg The machine is located at our facility in 71334 Waiblingen-Beinstein, is available immediately, and can be inspected upon request. Please schedule an appointment in advance.

Condition: excellent (used), Weber MCS 902, CCA | Slicing Line – Slicer, Checkweigher, Discharge Conveyor Slicer Brand: Weber Model: MCS 902 Serial number: 1312 Power supply: 400 V / 50 Hz Power: 10 kW Dimensions: 2900 mm x 1400 mm x 2380 mm Checkweigher: Belt type: Plastic mesh Belt width: 360 mm Dimensions: 610 mm x 400 mm x 1020 mm Discharge conveyor Brand: Weber Model: CCA Serial number: 1312 Power supply: 400 V / 50 Hz Power: 7 kW Belt type: Plastic mesh Belt width: 295 mm Dimensions: 5350 mm x 1800 mm x 1700 mm Blodpsy Hl Hvofx Amrsn The Weber MCS 902 industrial slicing line is a high-performance system designed for precise slicing of cold cuts, cheese, and meat products. The MCS 902 Slicer features advanced slicing technology, ensuring consistent slice thickness and minimizing raw material waste. The integrated checkweigher provides real-time portion weight monitoring for complete process control. The system is complemented by the CCA discharge conveyor, equipped with a hygienic mesh belt for smooth transfer of sliced product to subsequent packaging or processing stages.