Used Fliegl Tps135 13,5 T Tandemplanenanhänger, Neuwertig for sale (71,577)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Bedpfsi Ri Szox Albswt Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, Please note that the images are archive images! The vehicle may be in use. Additional information: Chassis: Central axle semi-trailer, low-bed Fine-grained steel welded construction, geared support leg at the front, telescoping rear support, chocks with holder, mudguards made of sheet steel over both wheels Coupling device: Central axle semi-trailer Drawbar with tested 40 mm drawbar eye, drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes, axle/chassis laser-aligned, reducing tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking system 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable Bwjdpfx Aljqmc Rajbjt Platform TTS low-lying steel trough, platform floor made of steel/checkered plate, steel walls welded solidly to the floor, platform length 5500 mm, trough with Load-Lock profile at the front and on the sides for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight unevenness in the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel trough and 1 x at the rear in the floor, each 5 tons. Additional pair of lashing eyes in the floor, each 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handrail on the ramps, covered with wood, with gas spring for single-person operation Operating instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Registration country/signs Registration country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may be in use.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Bwjdpfxjxb D Swo Albot Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802037879, empty load weight: 3,250 kg, maximum load weight: 34,750 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 6,790 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, available in multiple units Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Container fittings: 1 x 20 ft, flush at the rear (Note: low drawbar load with 20 ft container) 24 tons, 2-speed landing gear, single-sided operation, with semi-circular base and straight connection plate, with stroke equalization 2 support wedges with holder Rear underrun protection, steel Spray flaps at the rear, covering the entire width Half-shell fenders with anti-spray flaps according to EC Storage box for fire extinguishers up to 6 kg Fire extinguisher (ABC powder 6 kg) incl. stainless steel drip tray in the center of the rear container crossbeam, approx. 290 mm wide Axles + Suspension BPW disc brake axles, with 430 mm disc diameter "Axles/chassis laser-aligned" - reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight Air suspension 1st axle, automatic lift axle, including forced lowering and start assist, activated by "pressing the brake pedal 3 times" (start assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5", manufacturer at the discretion of the manufacturer Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Country of registration/plates Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign "A" for waste transport, foldable ADR approval according to FL/AT with ADR warning sign at the rear Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Bwedpfxozbtnio Albot Frame RAL 2011 traffic orange "10-year warranty against rust-through" Support feet black coated available in multiple units

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls Bwjdpfei Ri Hgsx Albjt 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014072, empty load weight: 7,300 kg, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,530 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,330 mm, suspension: air, tire size: 385/65 R 22,5", tire condition: 100 %, color: silver, Chassis, semi-trailer, transport company Fine-grained steel, welded lightweight construction, kingpin plate with replaceable 2" kingpin, main frame reinforcement for 25 tons, with center of gravity at 3 m loading length in the retracted state. Bedpfx Asza Dyyolbewt 13 pairs of hooks for lashing straps, welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. 24-ton, 2-speed support winch in reinforced design for loading and unloading, single-sided operation. 1 spare wheel holder for 1 spare wheel. 1 storage compartment for stowage, open, with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm. 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm, with reinforcing beam, installed between the outer stake pockets, except for one. 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, half open downwards. For lashing and inserting stakes 80 x 80 mm. Pull-out ladder at the rear on the right side. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm, including reinforcing beams. 10 "lightweight" stake sockets, B=80/ T=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. 2 plastic toolboxes, b=600 / h=425 / t=460 mm, lockable. Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm. Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the left side in front of the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm, with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob. Axle spacing offset 1310/1410 mm. Air suspension. 1st axle automatic lift axle, also electrically operated from the truck, with start-up assistance. Braking system 2-line compressed air braking system. Spring brake parking brake. 2 non-interchangeable coupling heads at the front. EBS Wabco, electronic braking system with EBS socket at the front. With raising & lowering valve + auto-reset function. Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately pre-equipped. Wheels and tires 385/65 R 22.5" steel rims. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front in LED. 2 white/red side marker lights at the rear in LED. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front. 1 rotating beacon with bracket, switched via side light. 2 pairs of warning signs, LED illuminated and extendable to 3,500 mm. Flashing side marker lights. Side 7-pin sockets, positioning 2x front panel, 2x support legs, 2x rear end. 1 additional 7-pin socket, in the underrun protection at the rear. 2 additional LED work lights, top inside on the fron

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Bwodoza A Txopfx Albjt Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Bwjdpfx Alsza Aiyebst Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Bwedszaz Tkopfx Albjt Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT10401014064, empty load weight: 1,500 kg, maximum load weight: 2,300 kg, overall weight: 3,800 kg, axle configuration: 1 axle, loading space length: 2,000 mm, loading space height: 1,000 mm, total length: 4,300 mm, total width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: green, available in multiple units Single-axle container trailer Type EPS 38 for diesel generator set installation Chassis: single-axle trailer Fine-grained steel welded construction Generator set attachment by means of screws Support wheel at the front, heavy-duty design, mechanically adjustable in length and foldable downwards 1 pair of 2-speed geared support legs at the rear, with straight lower part, can be operated separately on the left and right Chocks with holder Side impact protection, aluminum, painted in RAL 6031 bronze green, matte finish Under-run protection, steel, painted in RAL 6031 bronze green, matte finish Fenders in front of and behind the axle, with sheet metal cover at the top with anti-splash flaps 2 pairs of lashing points, each 1 pair at the front and 1 pair at the rear, embedded in the cross members, with 3 tons each for securing the trailer, with marking (sticker) 4 pairs of ferry eyes, yellow marked, Lashing point sticker on each lashing point Steel perforated sheet with rosette profile" on both sides, outside next to the generator set, access ladder on the side, on both sides Mounting for 2 x 20-liter fuel canisters on the vehicle frame on the front right Central lashing point sticker Storage box, steel, embedded in the floor at the front, with water drainage holes and lined with perforated rubber mat, with lockable lid, lock not included Coupling device: trailer, single-axle trailer Drawbar with tested pivoting drawbar eye 40 mm / to NATO drawbar eye Drawbar height adjustable via spindle. The nut for the spindle fastening screw at the bottom on the front right Parking sockets for electrical system/EBS and air Axle + Suspension BPW axles, with tapered roller bearing and S-cam brake "Axle/chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and Tires 235/75 R 17.5 according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Yellow connection on the front left and red connection on the front right ABS/EBS, electronic braking system with EBS connector at the front, with connecting cable Bwedpfx Ajzazrtslbet EBS modulator mounted in a protected position Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides Electrical system in ADR design with certificate 2 white position lights at the front and reflectors 2 white/red side marker lights at the rear 1 x 15-pin socket + 1 x 15-pin spiral cable at the front, removable Approval / Signs Country of approval: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, single-line Contour marking with reflective tape according to ECE R 048, only at the rear, white Warning sign according to ECE - 70 Painting Frame RAL 6031, bronze green, matte finish Drawbar in the same color as the frame available in multiple units

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013325, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, The images shown are archive images. The vehicle may still be in use. Chassis: Central axle trailer, low-bed Fine-grained steel welded construction Gearbox support leg at the front Telescopic rear support Chocks with holder Mudguards made of steel sheet over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin connector at the front, with connecting cable Bridge TTS Low-lying steel pan, bridge floor made of steel/non-slip steel plate, steel walls solidly welded to the floor Bridge length 5500 mm Pan at the front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight undulation of the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons Additional pair of lashing eyes in the floor, each 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/non-slip steel plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor handling and tracking behavior possible due to incorrect load distribution) Country of Registration/Signage Country of Registration: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) Bjdpfx Alszadb Debowt 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images shown are archive images. The vehicle may still be in use.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,580 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Demonstration vehicle The images are archive images; the vehicle may still be in use! Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing, gearbox support at the front, foldable rear support, 2 chock blocks with holder, steel underrun protection, splash guards at the rear across the entire width, quarter panel fenders, spare wheel, same brand as the standard tires, steel rim, loose, 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side panel touches the storage box when folded down. Lockable storage space for loading ramps under the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear) Drawbar with tested 40 mm tow hitch, drawbar height adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) 2-line pneumatic braking system, color-coded line routing for easy maintenance. Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS, 2 fail-safe coupling heads at the front, with connection lines to the truck 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red outline lights at the rear, 2 x 7-pole fail-safe connectors at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, Bwedpfxolhpzve Albst low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck, hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Stable tipping bridge with 4 mm steel plate floor, side panel structure made of steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom, platform width 2420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear The images are archive images; the vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Bwjdjy Slhqopfx Albet Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702011668, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate weight: 16,000 kg Stated fifth wheel load: 11,000 kg Tare weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis - Semitrailer for Forwarding High-tensile steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed into the outer frame, each with a 2.5-ton capacity Outer frame with "Load-Lock profile" for lashing strap attachment 24-ton twin-speed landing gear, single-sided operation, straight lower part, without compensating link Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter-shell mudguards Axles & Suspension BPW disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable couplings at the front, without connecting line EBS, Electronic Brake System with EBS socket at front, no connecting cable Caution: This trailer may only be towed by towing vehicles that ensure effective ABS operation! With lift/lower valve Vehicle stability control system Wheels and Tyres 385/55 R19.5" make at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights Side yellow LED lighting as deeply recessed as possible 2 white position lights at front Bjdpfx Aey Sk Szelbewt 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Anti-slip phenolic plywood, approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point load resistance (for forklift axle load up to max. 7,100 kg) Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Stakes 25 mm aluminium hollow profile, approx. 1,200 mm high, steel corner stakes in volume design, with 2 "inspection windows" Approval / Signs Country of Registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides, red at rear Paintwork Frame: RAL 3002 carmine red Landing gear: Black coated Front wall: RAL 3002 carmine red Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003406, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 01/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, mounting plate with replaceable 2" king pin 13 pairs of lashing rings recessed in outer frame, each rated 2.5 t Outer frame with “Load-Lock profile” for securing straps 24 t two-speed landing gear, single side operation, with flat base plate, without compensating slide Chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Document box on front wall, left-hand side (mounted slightly sloped) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, no connecting line EBS, Electronic Braking System, with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor units equipped with functional ABS! With lift and lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5” – make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt; multicompartment rear lights (3 sets of older Hella lights still available at plant for optional installation); lateral yellow LED markers recessed as far as possible 2 white front position lamps, each protected by 12 mm round bar welded over the top 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Approximately 30 mm phenolic plywood, cross joints with Omega insert, laid on longitudinal supports for high point-load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather exposure possible! Front bulkhead / Corner posts Approx. 1,200 mm high, corner posts made of volumetric steel Bwjdpfxsy Sk Rqs Albot Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white (sides) and red (rear) Paintwork Chassis: RAL 3002 carmine red Landing legs: Black coated Front bulkhead: RAL 3002 carmine red Attention: The images are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: Bwsdpfx Ajy Rxmwjlbet 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: good (used), axle configuration: 3 axles, first registration: 08/2011, suspension: air, Year of construction: 2011, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle Rear axle 2: Steerable Weights Unladen weight: 7,100 kg Payload: 31,900 kg gross vehicle weight: 39,000 kg Condition Technical condition: Good Visual condition: Good Warranty Warranty: No liability for printing & typographical errors. Subject to changes, prior sale, and mistakes! Bwodpfxoydqn Eo Albst Further Information Please contact Emad Al Shogran for more information. Vehicle number: Trailer: 12 Fliegl / BPW / Steering + Lift Axle / Extendable .: WFDFLT333501001822 German vehicle TÜV: General Inspection: 05.2024 - Safety Inspection: 11.2023 F.1 Technically permissible total mass in kg: 39,000 G Unladen weight: 7,100 kg Steering + Lift Axle BPW axle Extendable = Company Information = No liability for printing & typographical errors. Subject to alterations, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, empty load weight: 9,580 kg, maximum load weight: 30,420 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2027, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Air suspension with lifting and lowering function, axle load scales, total platform length approximately 9,100 mm, low-bed platform approximately 6,900 mm long, loading height (loaded) approximately 890 mm, 24 x lashing points, 10 tons each, 12 x stake pockets in the outer frame, access ramps (approximately 3,100 x 760 mm), access ramps adjustable laterally, 68 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, -- subject to printing errors, errors and changes, sample images --, more data available at: !, More Details: ! Bjdpfx Aozyyipjlbewt

Condition: used, empty load weight: 10,860 kg, maximum load weight: 37,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Rubber surface, two-part ramp with grating, ramps spanning the entire width, electro-hydraulic pump for ramps or connection to the truck's hydraulic system. -- Subject to printing errors, errors and changes. Sample images. -- More details can be found at: !, More Details: ! Bwjdezygc Nepfx Albst

Condition: used, empty load weight: 3,900 kg, maximum load weight: 6,100 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 04/2018, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 47 m³, suspension: air, tire size: 235/75R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Front with portal doors for through-loading, rear with portal doors, 27 mm screen-printed floor, 14 x lashing eyes on the loading area, loading height approx. 1,050 mm, contour marking according to ECE R 048 regulation, front with 2 gear support winches with 2 gears, BPW axles, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Bwsdpfxjzygb Sj Albjt

Condition: ready for operation (used), Schneider Electric LXM62DU60C21000 Servo drive SN:2710072445 , the article was only used for test purposes,mint condition, 100% functional, scope of delivery according to photos Bwodpfspf Arxsx Albet

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Bwedpfoucwzajx Albjt Price between €300-1000 each. Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 725 h, load capacity: 5,000 kg, lifting height: 4,030 mm, free lift: 1,230 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 2,000 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: As new Technical condition: very good Front tire type: Non-marking Front tire condition: New Rear tire type: Non-marking Rear tire condition: New Battery voltage: 80V Bwsdozwacwepfx Albjt Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2016 Description: Price includes a new UVV inspection, 4x SE non-marking tires NEW, lighting according to STVZO, paintwork in as-new condition (original), the 2016 battery will be regenerated with a power cycler including Kappa test (a new or recently refurbished battery can be purchased for an extra charge), charger included with plug, ex-rental unit from Still Germany. We will gladly arrange cost-effective transport for you. A lease-purchase option is generally possible. We are an official Jungheinrich partner. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, STVZO compliance, full cabin, full free lift, CE certificate, scale, rotating beacon, Mini lever, Bluespot

Condition: used, maximum load weight: 2,840 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 10/2023, Year of construction: 2023, Baos M353616 Full-Aluminum Construction Machinery Trailer / Machinery Transporter Car Trailer 3,500 kg Condition: as new (Year of manufacture: 2023) Demonstration unit TÜV inspection: new Immediately available Technical specifications: Permissible total weight: 3,500 kg Unladen weight: approx. 660 kg Payload: approx. 2,840 kg Number of axles: 2 Loading area length: 3,550 mm Loading area width: 1,650 mm Brake type: braked, overrun brake Chassis: low-loader (wheels next to body), rubber torsion axles Electrics: 12V, 13-pin connector Tire size: 195 R14C Equipment: Heavy-duty automatic jockey wheel with strut Bucket holder Phenolic resin coated anti-slip floor plate 2x lashing points 2000 daN at the rear of the loading area 8x floor anchors 800 daN mounted laterally in the loading area 4x aluminum tie-down rings on the outer frame Automatic jockey wheel Foldable aluminum loading ramps incl. support stands Bsdpfjzxizlex Albowt Aluminum plug-in panel between aluminum loading ramps Aluminum mudguards Welded frame V-drawbar AL-KO or Knott axles and brake system 100 km/h speed approval Despite the utmost care, errors in this advertisement cannot be excluded. Subject to prior sale and errors!

Condition: used, maximum load weight: 27,300 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 11/2019, loading space length: 13,552 mm, loading space width: 2,485 mm, loading space height: 2,310 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2019, Equipment: ABS, WÜLLHORST SYSTEM TRAILER AS NEW 2T TAIL LIFT SAF ----VEHICLE HISTORY 1 OWNER GERMAN VEHICLE VIDEO AVAILABLE ON REQUEST ----VEHICLE FEATURES ----AXLES & CHASSIS SAF AXLES FULL AIR SUSPENSION LIFT AXLE FORCED STEERING ----DISC BRAKES ----EQUIPMENT & FUNCTIONS ALCOA ALUMINIUM WHEELS 2T TAIL LIFT (LOADING PLATFORM) REVERSING CAMERA TOP AND BOTTOM THIS SEMI-TRAILER IS A CUSTOM-BUILT MODEL ----TECHNICAL DATA YEAR OF CONSTRUCTION: 2019 TYRES: 385/65R22.5 ----EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 30 DAYS PLATES AND 17 - 21 DAYS AUSTRIA PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least €500.00 / €1,000.00 will be charged for sales to EU & third countries. Modifications, errors and prior sale excepted! You can find more vehicles on our homepage: Sale is carried out solely in accordance with our terms and conditions – see homepage Bodex Dyf Sopfx Albowt Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these might be caused by transmission errors in the systems of various platform providers. We therefore point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information intended to initiate a contract. The information provided here is without guarantee and does not represent warranted characteristics.