Used Erlo Tca 45 Bv for sale (12,329)

Condition: good (used), Three-phase motor, electric motor -Power: 45 kW -Speed: 2960 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 900/550/H520 mm -Weight: 316 kg Hodpfsccwtzox Af Sju

Year of construction: 2013, condition: used, Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction capacity: 140 m³/h Final pressure: approx. 60 mbar (absolute) Hodpfxjcfw Uke Af Ssu Accessories: Intake filter; Operating manual Delivery time: short notice

Condition: used, Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing blank: for Ø 45 mm shaft -made of: gunmetal -Number: 13x stock available -Price: per piece Hsdpfx Ascgdtaof Sou -Dimensions: 83/60/H86 mm -Weight: 2.4 kg/piece

Condition: used, Gear motor, electric motor, electric gear motor -Engine manufacturer: Bauer -Gearbox manufacturer: Bauer Hodpfsckbfiox Af Seu -Speed: 45 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: -Dimensions: -Weight: 56 kg

Condition: used, Three-phase motor, electric motor -Voltage: 220/380 V -Power: 0.25 kW -Speed: 1380 rpm Hedpfxod Sp Ixj Af Ssu -Shaft: Ø 14/30 mm -Construction: B5 -Dimensions: 310/195/H160 mm -Weight: 12 kg

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 500 x 500 mm, 20-45 plates, open spout, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 70-190 liters, dimensions 2000 - 3000 x 1000 x 1400 mm, weight approx. 1300 kg, hand or motor hydraulics, drip tray, filtrate, with or without filter cloths Hsdjfbbpmspfx Af Sju

Condition: new, 35 (600) mm 35 (900) mm L-beam 50 x 50 x 5 (800) mm T - beam - web outwards 60 x 7 (600) mm Axis diameter 50 mm work speed 4,5 m/min Hsdpfx Afofv H Eto Seu total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Punching force: 45 tons. Stroke rate: 40 strokes/min. Hedpod Hxrtjfx Af Ssu Stroke: 762 mm. Working height: 1110 mm.

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm Hodod I R Ngjpfx Af Sou pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: good (used), Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool -Profile: Ø 45 mm -Dimensions: 535/195/H140 mm -Weight: 35 kg Hodpfx Afog D Rmms Seu

Year of construction: 1991, condition: good (used), machine/vehicle number: 154.03.10.01.0291, Giętarka do ramek dystansowych Lisec BSV-45 wraz z podajnikiem do ramek oraz drukarką. Min. wymiar ramki: 250 x 150 mm Max. wymiar ramki: 3000 x 2200 mm Hjdsg D Hdpepfx Af Ssu Napięcie: 380-3/N~50Hz Złącze: 10 kW Ciśnienie: 6 bar Waga: 1125 kg Gwarancja rozruchowa.

Condition: new, Bernardo BF 45 HSV Drilling and Milling Machine Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Milling cutter arbor max.: 80 mm Overhang: 280 mm Spindle speed: (12) 75 – 3200 rpm Spindle taper: MK 4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 730 x 210 mm T-slot size: 14 mm Distance spindle / table max.: 640 mm Distance spindle / base plate max.: 1190 mm Travel (x / y): 495 / 200 mm Hsdpfx Asgd H Uxsf Sou Milling head swivel: -90° to +90° Height adjustment milling head: 260 mm Column diameter: 115 mm Working area base plate: 365 x 375 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1070 x 800 x 2060 mm Weight approx.: 362 kg Scope of supply • Quick-change drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Draw spindle M 16 • Reducing sleeve MK 4 / 3 • Combination milling arbor MK 4 / 27 mm • Automatic quill feed • Height-adjustable protective shield • Digital quill stroke indicator • Thread cutting device • Coolant system • LED machine light • Longitudinal measuring scale • Operating tool

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Hedpfxsq U Rm He Af Seu Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, mileage: 248,500 km, power: 332 kW (451.39 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 11,720 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 3 axles, wheelbase: 3,200 mm, brakes: engine braking, color: red, gearing type: automatic, emission class: euro5, suspension: steel, loading space volume: 10 m³, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, traction control, trailer coupling, Urea tank (AdBlue) Displacement 12,882 ccm Hydraulics (power take-off) Hodjraitijpfx Af Sou EBS Euro EEV1 Payload 14,280 kg Automatic air conditioning Leaf suspension Dautel side aluminum drop sides swinging and folding with lifting springs Rear steel drop side Folding underride guard Lashing rings Sun visor Rotating beacons Pneumatic horns Errors excepted

Condition: good (used), Rail wheel, flanged wheel, roller, track wheel, wagon wheel, roller -Rail wheel: Flanged wheel with bearing Hedpfx Aepwnf Esf Sou -Wheel: Ø without flange 130 mm, see photos -Hole: Ø 30 mm -Dimensions: see photos -Quantity: 124 rolls available -Price: per piece -Overall dimensions: Ø 160 x 45 mm -Weight: 3.3 kg/pc.

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Hsdpfx Aerddh Isf Sju Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Condition: ready for operation (used), Baumüller GSF 45-LB servo motor SN:91208506 + ROD 420 500 01-03 rotary encoder Id. 376 840-7P SN:44402097A, used, normal signs of use, 100% functional, scope of delivery as per photos Hodpslvy D Hofx Af Seu

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Hedpfxsk Aa Rre Af Sju Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators -Condition: used -Manufacturer: Rösler, ceramic grinders 40/45/45 mm 1 box -Content: 71 kg Hsdpjink Tbofx Af Ssu -Price/delivery: complete -Transport dimension.: 600/400/H220 mm -Total weight: 72 kg

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Hodpfxeipv Rls Af Sju Weight approx. 1100 kg technical specification under subject

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min Hsdpoupxrnsfx Af Sou max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: used, Year of construction: 1981, machine/vehicle number: 104680, Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton Hjdpfjuqcwdsx Af Ssu

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes Hedou N Ivqepfx Af Seu - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm Hjdpfx Afou N Sh De Sju -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Condition: used, empty load weight: 8,460 kg, maximum load weight: 27,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2018, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, Hsdpfeu Rfkbox Af Sju ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .