Used Epoxy Resin Distribution Transformers for sale (3,132)

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug Itsdezugn Ispfx Ah Ejl - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: used, functionality: fully functional, machine/vehicle number: K7 25500, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, 3-phase transformer (dry) from primary 10KV (± 5%) to 500 V secondary with a capacity of 3000 KVA Itedpjx Swaxsfx Ah Eol

Condition: used, capacity in kVA 53,5 kVA input voltage 480 V output voltage / V length 800 mm width 600 mm height 530 mm weight 260 kg MITSUBISHI Dry type transformer 3PH 53.5 kVA TR-YU Condition: used functional Itodowth Ucepfx Ah Ejl

Condition: excellent (used), AREVA 400 kVA electrical transformer station with main low-voltage switchboard (TGBT) Year 2006 Iedpjyr Afljfx Ah Eotl

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer Itodpfx Ahsrgtfge Eel -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Iodpfx Ahoz Ak Dij Estl Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2009, power oil transformer 12,5MVA 110 / 23kV, manufacturer ETD Plzeň Czech, on load tap changer, conservator, functional, in operation since 2009, very good off-load and on load losses, price negotiable. Itsdpfx Aehufn Nsh Eol

Condition: good (used), Year of construction: 1991, transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Isdpfxoru Ra Ij Ah Eetl -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo type plate -Dimensions: 1000/570/H760 mm -Weight: 388 kg

Condition: used, This listing is for 1 of 2 BWT LOOPO WFI Storage and Distribution System. The unit is in full working condition and is ready for immediate release. Overview This BWT LOOPO system is a high-performance Water for Injection (WFI) storage and distribution solution, designed for reliable and hygienic operation in pharmaceutical and biotech environments. Mounted on a robust stainless steel skid, the unit includes a high-grade stainless steel storage tank, engineered for ambient temperature WFI applications. The system features Siemens HMI controls for intuitive operation and precise system monitoring. Key Features - WFI Storage & Distribution at Ambient Temperature - 30 kW Power Capacity - Siemens HMI Touchscreen Interface - Fully skid-mounted for compact and efficient installation - Stainless steel construction throughout – skid and tank - Ideal for pharmaceutical-grade applications Itjdoxhdxwjpfx Ah Esl - Designed for continuous circulation to prevent stagnation and microbial growth Technical Specifications - System Type: Ambient WFI Storage & Loop - Construction: Stainless Steel (Skid & Tank) - Control System: Siemens HMI - Power Supply: 30 kW - Installation Type: Skid-Mounted - Year of Manufacture: 2016 Applications - Pharmaceutical manufacturing - Biotech production facilities - Cleanroom and GMP environments - Laboratories requiring sterile WFI distribution

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Iodpjz Agv Uofx Ah Ejtl - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005, Sollich Turbotemper® TE 1600 D, manufactured in 2021, is a chocolate, fat mass, and spread tempering machine. Tempering capacity ≥1,350 kg/h, actual max. consumption in previous operation approx. 1,200 kg/h. Operating process in three stages: Stage 1 – Heating stage to recrystallize the mass to approx. 45 °C, with a separate hot water circulation circuit, mass temperature-dependent control, and a water circulation pump with electric heating. The circuit also has a cooling function, so mass inlet temperatures above 45 °C can be compensated. Stage 2 – Cooling and crystallization zone, guaranteeing a constant crystal quantity regardless of the mass flow rate. Large cooling surfaces and precise temperature control; specially shaped shearing and mixing tools create a high shear gradient and accelerate the formation of microcrystalline, stable beta crystals. Stage 3 – Mixing zone for homogeneous distribution of the beta seed crystals. The mixing stage can also be operated as a cooling stage for lower starting temperatures or higher throughput at the same starting temperature. Equipment and features: • First-in/First-out principle, dwell time of all mass particles is the same • Siemens PLC with TP 900 (9") touch panel, parameters for up to 40 masses can be stored as retrievable programs • Reinforced drive with measurement of the power consumption, including visualization in the HMI. • Turbulent water flow, separate circulation pump for each stage, automatic power control • Two additional water control circuits in the frame: for heating the mass line to the mixing unit and the mass return line to the tank, as well as the line between the tank and the tempering machine, including operation via HMI. • Thermal start-up protection to prevent the machine from starting if it has not heated up sufficiently • Digital display of the mass inlet temperature, separate PT-100 sensor for the feed line • Safety pressure switch with digital pressure display, shuts off the feed pump in case of overpressure • Preset programs "Tempering" and "Night" with automatic adjustment of all heating and cooling circuits. Included in the scope of delivery: Feed pump type SPN 1500 (2"), machine no. 35120010, frequency-controlled via the tempering machine's control. Bypass pump type SPN 1000 (2"), machine no. 35120015, frequency-controlled, operated via HMI. Connection: Cooling water 5–10 °C, customer-side, 2–4 bar, minimum differential pressure supply/return 1 bar; 400 V, 3 Ph, 50 Hz + neutral + earth. Dimensions according to manufacturer's drawing A 17555-2, available. Iodezzvgtopfx Ah Ejtl Condition, history and handling: Manufactured in 2021, delivery and commissioning by Sollich in week 40/2021, approx. 180 operating hours. Used exclusively for palm oil-free spreads, stored dry in Wuppertal since the end of 2024, inspection by arrangement. Documentation, operating manual and conformity documents are available. Purchase value in 2021 according to order confirmation: €121,320 for the unit including the specified pumps and water control circuits. Sale from commercial to commercial, excluding any warranty, technical specifications according to manufacturer's documentation, subject to change. This tempering machine is also available as part of a complete tempering and mixing system (including nut mixing unit NM 200 VA and cooling unit), see advertisement ID A22725782.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,000 h, STRATASYS Fortus 450mc (Gen2) – Under Warranty Machine in excellent condition: Annual Stratasys preventive maintenance completed (12, 24, and 48 months). Air dryer upgraded from Gen 2 to Gen 3. Iodpfey U Hh Rox Ah Estl Stratasys manufacturer warranty (excluding consumables) valid until October 15, 2026. Full Material License included: Standard, Engineering, High Performance, and Stratasys Validated Materials. Demonstration and training available on-site in Lille, France. Supplied with: Three-phase transformer. NEW consumables: 1x ASA Black 1x ULTEM™ 9085 Black 1x SR30 Support T16 nozzles Build sheets Price: €29,000 excl. VAT Optional services: Delivery / Installation / Training depending on destination Additional used materials available (ULTEM™, PC, etc.) Description Produce parts up to 406 x 355 x 406 mm. Take advantage of industrial FDM additive manufacturing with optimized speed, material versatility, and cost efficiency. The Fortus 450mc delivers precise and reliable performance to help transform supply chains, accelerate production, and reduce manufacturing costs. Its proven reliability and wide range of compatible thermoplastics make it a trusted 3D printing solution for manufacturers in aerospace, automotive, railway, oil & gas, and commercial product industries. The Fortus 450mc can also operate as an open system when used with the OpenAM Material License and associated software. This option allows users to adjust print parameters to optimize material performance for specific applications. In addition, the system supports Stratasys Validated Materials developed with third-party suppliers, expanding material availability and enabling a broader range of applications.

Condition: used, Year of construction: 1989, input - primarily 400 V three phases output - secondarily reversible - 230 V three phases - 400 V three phases - 525 V three phases - 660 V three phases power 50 KVA space requirements width - 800 x depth - 400 x height - 2,000 mm Itsdpfx Ascw Twpjh Eel weight approx. 430 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds Itsdpfsz Ag Rrex Ah Ejl - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Iodpfxjz Agw Eo Ah Eetl - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS coating machine 19.06.6512 TYPE TF/P Plus Max. working width 150 mm Max. height 120 mm Adjustable feed rate max. 140 m/min Upper pressure rollers with drive x 6 Pressure force adjustment via pneumatics Lower pressure rollers with drive x 6 CE marking Year of manufacture 2013 Product description: - Paint without waste - Robust and efficient transport with 6 motor-driven pressure units. - Various application heads guarantee results, even for filling and defect repair products. Designed for continuous application of coating, gesso, and paint on strips, picture frames, and profiles with an extrusion system, using a correspondingly shaped steel counter-template. Construction made of steel sheet and tubular steel. Guaranteed forward movement via no. 6 lower metal rollers and no. 6 upper rubber pressure wheels, variable with adjustable speed via an inverter. The upper pressure wheels are mounted on freewheel bearings to reduce uneven wear. Pneumatic distribution panel equipped with a selector for engaging the upper pressure wheels and corresponding independent pressure regulators. OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: Isdpfxsytc Rks Ah Eetl 1. Profiling machine for grinding wheels and silicone wheels from the Italian company MAKOR, price €1,500 - Year of manufacture: 2003 - Serial number: 5933 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Weight: 280 kg 2. MAKOR ST/100 film slitting machine, price €1,200 3. MAKOR TEP 3000 conveyor belt, price €700

Condition: excellent (used), Year of construction: 1999, ROHDE KE 770 S Series Kiln Five-sided heating ensures optimal temperature distribution across the entire firing range. This reliable unit is ideal for both ceramic workshops and ambitious individual creators. Isdoz Advlopfx Ah Eotl Key advantages: * Maximum temperature of up to 1300°C – ideal for a wide range of firing processes * Controller with 10 programs – convenience and precision in operation * New heating coils – guarantee of reaching full temperature and efficiency * Technical condition: very good – kiln ready for immediate use Technical specifications: * Chamber capacity: 770 liters * Chamber dimensions: * height: 130 cm * width: 70 cm * depth: 83 cm * Power supply: 400 V * Power: 40 kW This is a robust and proven piece of equipment that will last for many years and ensure excellent firing results.

Condition: good (used), Lohberger Food Serving Unit Dimensions: Width: 2100 mm Depth: 850 mm Height: 800 mm Ijdpfx Asxqx Rgjh Estl Height with glass shelf: 1170 mm Depth with tablet shelf: 1180 mm Basins: W x L x D 300 x 510 x 200 mm Water supply via water connection on the basins Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1992, operating hours: 10,855 h, power: 92 kW (125.09 HP), Equipment: ABS, all wheel drive, cabin, Unimog 427/10 Winter Service VIN: W171477 Chassis / Attachments * Leaf suspension * Wheelbase: 2640 mm * Tires: 14.5R20 * Remaining tire tread: approx. 90/50% front, 80/50% rear * 1 diesel tank * Trailer coupling * Front and rear PTO * Front and rear hydraulic connections * Snowplow mounting kit * Raised exhaust Body * Küpper-Weisser HD, year of manufacture 1992, 1.7 m³ grit spreader body * Spreader can be parked on supports * Three-way tipper Cab / Driver's cabin * 2-seater * Roof hatch * Beacon lights Engine / Transmission * 5,958 cm³ * Manual transmission * 312,656 km Weights * Gross weight: 7,500 kg * Payload: 3,000 kg * Curb weight: 4,500 kg Miscellaneous * German vehicle * 1 previous owner New general inspections / safety inspections or load reductions/increases are available on request. We are happy to assist you in obtaining export/transfer license plates. Delivery of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for misprints, typographical errors, prior sale, or changes!—Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², a large selection of vehicles can be found. Our company philosophy is characterized by fairness and credibility. Because customer satisfaction is particularly important to us, we offer our clients an excellent all-around service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/short-term license plates. Itedpowyy N Ejfx Ah Esl Handling customs formalities We are happy to assist you with customs procedures.

Condition: good (used), Betschart Swiss transformer core testing system KPA 15 function The output voltage, which can be infinitely adjusted by hand using a rotary knob, is fed directly to the excitation coils of the test core. As a result, in the air gap of the test core a homogeneous electromagnetic field is to be built up, with which core material inserted into the air gap can be characterized. The basic operation of the core testing system is carried out via the switching and display elements on the front panel on the front of the test car. Technical specifications Input voltage: 2 x 400 V - 50/60 Hz Input current: 38.3 A maximum Output voltage: 0 ... 230V Output current: 65 A maximum Measurements: Moving iron voltmeter 0 ... 500V for input voltage Moving iron Voltmeter 0 ... 250V for output voltage Iodpfxjd Nxhko Ah Ejtl Moving iron ammeter 0 ... 40 / 80A for input current Moving iron ammeter 0 ... 75 / 150A for output current Laboratory sockets for external voltage measurement direct, 1: 1 Miniature circuit breaker 2-pole, 63A characteristic B Voltage measurement output voltage Current measurement output current Voltage measurement input voltage Current measurement input current Laboratory sockets for external current measurement Current transformer 50A / 5A Current measurement current transformer 75A / 5A output side Main and emergency stop switch Manufacturer price: 27,000, - € gross Matching variable transformers can be found in our shop More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 1994, condition: ready for operation (used), Nominal load: 1250kVA, weight: 3.37t. Itsdem H Uqropfx Ah Esl

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine Itjdezic Rujpfx Ah Eel New edger channel 380 V / 220 V transformer included

Year of construction: 2014, condition: not inspected (used), Distribution board CTP_PWR2_400 Magnus interlock board Drum drive module Iodpfx Ashcz Hxjh Estl Output rollers

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 988, Jumberca SYX2 single-jersey circular knitting machine, machine number 988, year 1990. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Plate date: 04/25/1990 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single-jersey knitted fabric: plain jersey, pique, and fabrics for outerwear, sportswear, and underwear. INSTALLED EQUIPMENT: · Memminger-IRO LMW 3 yarn control unit · Electrical panel with LOYJE 13.220 transformers and ABB / BBC thermal-magnetic circuit breakers · Transformer with 200, 220, 380, 415, and 440 V taps · Stepped pulley drive · Complete top sinker plate · Emergency stop button NEEDLES: Groz-Beckert Vota 76.48 G09 cylinder needles and SNK 42.37-24 G2 sinkers. Internal set reference: SK 20 5719 001/00. POWER SUPPLY VOLTAGE: The transformer has taps for 200, 220, 380, 415, and 440 V, allowing the machine to be adapted to different power supply networks. Itjdpfx Ahszvh Eqj Esl CONDITION: Complete and assembled machine. Electrical panel accessible and photographed. A visit can be arranged for on-site inspection and operational testing. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, Year of construction: 2008, operating hours: 37,000 h, For sale is an ARBURG ALLROUNDER 630 S 2500-800 ECO injection molding machine from 2008 with extensive automation and peripherals. Manufacturer: ARBURG Type: ALLROUNDER 630 S 2500-800 ECO Year of manufacture: 10/2008 Clamping force: 2,500 kN / 250 t Injection unit: 800 Control system: ARBURG SELOGICA The machine is equipped with an original ARBURG Multilift V select with a load capacity of 15 kg. The system also includes a complete safety enclosure, conveyor technology, and other peripheral devices. The machine is connected to the power grid and is currently in operation in a production facility. An inspection can be arranged by appointment. Technical specifications / Design: ARBURG ALLROUNDER 630 S 2500-800 ECO Year of manufacture 10/2008 Clamping force 2,500 kN / 250 t Injection unit size 800 Spindle diameter: 55mm Control system ARBURG SELOGICA Operating voltage 400 V / 3~ / 50 Hz Control voltage 230 V / 50 Hz Total connected load 81 kW Total rated current 145 A Automation: ARBURG Multilift V select Year of manufacture 10/2008 Load capacity 15 kg Control via SELOGICA pneumatic design X-/Y-/Z-axes complete safety enclosure part removal via conveyor belt Additional equipment / Peripherals: Piovan material conveying unit material hopper conveyor belt additional conveyor belt on the machine side several temperature control / tool circuits ARBURG temperature control unit extensive media connections complete automation cell. Itedpozw D Hmefx Ah Eel An inspection of the machine is possible after prior appointment. Location: Greater Thuringia area _____ In addition, the following machines, not listed here, are also available: DEMAG Ergotech 50-270 – Year 2002 DEMAG ViVa 100-400 – Year 2000 DEMAG Extra 200-840 – Year 2007 DEMAG Ergotech 80-200 – Year 1995 DEMAG Ergotech 80-200 – Year 2001 ENGEL Victory 80/40 – Year 2006 DEMAG Ergotech 35/320-120 concept – Year 2002 _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are appropriate for their age. Used machines are sold exclusively to commercial enterprises and without warranty.