Performance test console with transformer

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Kljdpeyn Nybsfx Ahvop Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) Klodpof Sqckefx Ahvep The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, load capacity: 1,500 kg, fork length: 1,100 mm, overall weight: 3,350 kg, total length: 3,100 mm, total width: 1,000 mm, TECHNICAL DETAILS Lifting capacity: 1,500 kg Fork length: 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,000 x 2,000 mm Weight: 3,350 kg EQUIPMENT Ksdpfx Aheyt Nl Isvjlp Charger

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs Kjdpfsyt Nlbox Ahvjlp EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Klsdeitcu Eepfx Ahvsp Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 003002, paper weight (min.): 35 g/m², paper weight (max.): 209 g/m², paper width (max.): 738 mm, paper height (max.): 1,300 mm, TECHNICAL DETAILS Max. paper size: 738 x 1,300 mm Min. paper size: 210 x 297 mm Sheet height: 1,200 mm Paper weight: 35 to 209 g/m² Kodpfx Ahoyrnz Esvslp MACHINE DETAILS Power supply: Three-phase, 400 V Current: 12.6 A Connected load: 5.3 kW Dimensions (L x W x H): approx. 4,380 x 1,870 x 1,680 mm EQUIPMENT PFU-74F pallet feeder User-friendly touchscreen control panel 6 folding pockets First knife fold and 2 pockets under the knife Second knife

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Ksdpfx Ahsyrmzqjvolp Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: good (used), Tailstock Quill size: MK 2 Quill stroke: 30 mm Kodpfodlp Txox Ahvslp height-adjustable Tip height of 250-285 mm of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) Kjdeyub R Ejpfx Ahvolp 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar passage: 34 mm, controller model: Fanuc 21T Modell B, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar capacity: 34 mm MACHINE DETAILS Ksdjyrf Enspfx Ahvslp CNC control: Fanuc 21T Model B EQUIPMENT CS axis left CS axis right Approx. 26 fixed tool holders 2x driven tool holders (1x axial, 1x radial) Hainbuch collet chucks left and right Chip conveyor Manuals Note: The bar feeder is not included in the offer.

Condition: reconditioned (used), Steel grinding machine Make REMA Model DS 07/ST version with pole-changing motor 0,22/0,37 kW 1450/2900 rpm year of manufacture unknown Ma.-No. 022857 Kedohvu Tmspfx Ahvelp Equipment: - Reversing switch right/left rotation - column design with chip tray - Wet grinding device - 2 pcs. support table ATS (left) inclinable from -5° to +15 and with spring rockers - 2 pcs. angular stops - adjustable support table ATK (right) for grinding chip grooves - steel holder for support table ATK 360° rotatable, swiveling, with height adjustment and knurled screw for adjustment of chip depth - enlarged protective hood (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - protective hood (right) for grinding wheels Ø 125 mm with mounting flange - Operating instructions used as seen, without warranty

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Klsdpfx Asyrfvgohvop Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000046, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer: €143,250! Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 ppm Printing speed A3: up to 171 ppm Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Kjdpfx Aoyrd Rcjhvjlp Paper specifications: Total paper weight range: 50 gsm – 300 gsm Plain paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper format: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main unit dimensions: Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter readings: A4 simplex: 67,535 A4 duplex: 52,601,622 A3 simplex: 0 A3 duplex: 3,853 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/100 Technical specifications Pressure 100 t stroke 300 mm table area 1070 x 260 mm column passage between the guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1400 kg. Space requirement approx. 2110 x 1000 x 2290 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Ksdpfx Ahjgipilevjlp Pressure gauge

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Kedpsypdw Dofx Ahvolp Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F