Used Eagle Eagle Gear Box for sale (17,101)

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and Godstnz Ttjpfx Ak Uoug gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1200 1.800 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Gedotxn Irjpfx Ak Ujug Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed.

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Gujdpfx Akoitcvus Uog Price: on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT Guedpfx Akoxxih Es Ujg CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Linear motors on all axes Carbon traverse (crossbeam) Composite body Pallet changer Various nozzles Protective lenses

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA Gsdpfx Aex R An Eek Ujug 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 Drilling system BTA Min. drilling diameter D 35 mm Max. solid drilling D 130 mm Max. counterboring D 170 mm Main spindle block with two-stage gearbox -Drive Ax AC motor 37 kW with brake for spindle locking 1200-1500 rpm -Drill spindle block with two-stage gearbox 50-500 rpm, 450-1200 rpm, electrically switchable. Optional rotating / stationary tool. Main spindle box (tailstock) with two-stage gear electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck. Main and drill spindle speed continuously adjustable Machine bed as welded construction Guideways in linear roller design size 65 -Drill carriage movement via ball screw, gear and servo motor 3 kW Rapid traverse max. 3000 mm/min Maximum feed rate: 1000 mm/in. Hydraulically attachable drill bushing holder Guodsq A S Ekepfx Ak Ueg 2 x attachable steady rests 2 x roller pre-centering devices D20-100 mm 2 x Boza drilling range D 8-200 mm with chip chute and suction pump Scraper conveyor -1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring of the drilling spindle and feed rate in % painting: blue/gray, RAL 5015/7035

Condition: used, functionality: fully functional, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, CraneMasterStoreLinear S-DOWN 1530: A loading and unloading device offering an efficient connection between the machine and the storage system. It makes the automation of storage, logistics, and loading and unloading of material and cut parts, including the associated offcuts, even more efficient. It offers all the automatic functions expected of a CraneMaster system, such as efficient loading of material from the storage to the cutting machine's pallet, and simultaneous unloading of cut parts to the storage or to a discharge station. The system is recommended for manufacturing and service companies expecting the highest performance, with production ranging from low to medium or high volume. Additional Options: - Automatic sheet separation - Automatic sheet thickness measurement - Anti-collision system - Automatic grate cleaning system - Gripper adjustment system - Additional conveyor for cut parts - Independent control of suction cups - Double the number of suction cups Gsdpfx Aezrfy Dek Uoug - Precise measurement of the weight of the storage tower eTower 240 sheet storage system – This is an automatic sheet storage system that works with the loading and unloading system of the CraneMasterStore or CraneMasterStoreLinear laser cutting machine. The eTower2 material storage system consists of a storage column, which also functions as a transport column, with an elevator moving within it. The elevator's task is to move shelves between the storage columns and the loading and unloading locations. In addition, the system is equipped with a movable external loading and unloading station.

Condition: used, mileage: 1,083,348 km, power: 324 kW (440.52 HP), first registration: 04/2004, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: other, total length: 5,900 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, = Additional options and accessories = - Aluminum fuel tank - Immobilizer - Sleeping cabin Guodpfxszz Nb Rs Ak Uog = More information = Tyre size: 315/70 R22.5 Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 7.200 kg Carrying capacity: 11.800 kg GVW: 19.000 kg

Condition: used, maximum load weight: 34,310 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 02/2009, next inspection (TÜV): 12/2026, loading space volume: 55 m³, total length: 11,500 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2009, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Spitzer feed silo, 55 cm, 6 compartments, 6 dome lids (Vehicle 872) First registration: 06.02.2009 Type SF 27/55/4P ID 1532, manufactured 2009 -40/ +80 degrees Celsius 2.0 bar operating pressure Permissible gross vehicle weight 34,000/40,000 kg Unladen weight 5,690 kg Payload 28,040/33,040 kg Overall length 11,500 mm x overall width 2,550 mm x overall height 3,950 mm TÜV (technical inspection) valid until 12/2026 1 x LED reversing light 1 x LED work light front + center + 1 x on the passenger side at the rear 55 cbm capacity 6 compartments, 6 dome lids on top Air suspension with raising and lowering function Loosening device Pressure gauges Outlets / filling points on the outside and at the rear Next internal inspection 12/2027, next external inspection 02/2029 Storage box on the passenger side in front of the frame + plastic storage box on the passenger side in front 2 x 12-ton 2-speed gear winch Air suspension with start-stop function (red+black) 1st axle: lift axle with switch BPW drum brakes ALCOA light alloy rims, predominantly Tires 385/65R22.5, 1st approx. 80/90%, 2nd approx. 50/80%, 3rd approx. 80/90% 3rd axle: steering axle Rear view camera Folding access platform with walkway 4 x wheel chocks Hose compartment / storage compartment open on the driver's side Gusdpfx Ajzyzffok Ueg Price: €17,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the base machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is mounted between the workpiece spindle stock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angle adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range X-axis: 140 mm Travel range Y-axis: 100 mm Travel range Z-axis: 300 mm Tailstock travel W-axis: 420 mm Swivel angle of the end mill head A-axis (left): 50° Swivel angle of the end mill head A-axis (right): 60° Largest millable module with hob cutters according to DIN 8002: 4.5 mm Largest millable module for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range B-axis: 0–1,500 rpm Workpiece speed C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (end face of the milling spindle): 50–230 mm W-axis (end face of the tailstock spindle): 165–585 mm Feed rate X-axis: 3,500 mm/min Feed rate Z-axis: 3,500 mm/min Feed rate Y-axis: 4,000 mm/min Feed rate W-axis: 5,500 mm/min Feed rate V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Gusdpfx Akszwmyie Ujg Loading device Extensive range of accessories

Year of construction: 2025, condition: refurbished (used), REVISED by RSA in 2025 Revised & Cleaned & Repainted Replacement of wear parts Tested in our facilities in production prior to shipment Round: Ø 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths : 100 – 1.000 mm One heavy duty RSA cutting unit model NC2001 with : Godpovtpd Tjfx Ak Uoug -Bundle loader, size approx. 600 x 600 mm, usable length approx. 6.200 mm and maximum bundleweight 3.000 Kg -Double feeding rolls -Heavy-duty cutting motor and gear box, with 5,5 kW motor; cutting motor speed 30-250 rpm -CNC movement up/down for precision cutting. (new version, NO hydraulics) -Hydraulic regulation in clamping units -1 Full automatic adjustable length control with CNC stopper One deburring unit RASAPLAN 1000 with : -Automatic length adjustment according to cut length -Synchronised chain transport -Integrated dust exhaust unit Electric : -Program for short lengths -Special program module for calculation of swivelling discharge -Operator panel Siemens OP 17 -Combined cooling through spray mist & jet cooling -Servo axes Revised: 2024 Round: 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths: 100 – 1.000 mm

Condition: used, functionality: fully functional, mileage: 247,430 km, power: 90 kW (122.37 HP), first registration: 03/2001, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x4, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 2, Year of construction: 2001, operating hours: 5,018 h, Equipment: ABS, power assisted steering, So. Motorhome/RV over 2,800 kg: + Bremach + TGR 35.3 / 4x4 + First registration: 28.03.2001 + 247,430 km; 5,018 engine hours + 2 comfort seats + Compressed air connection (compressor can be switched on electrically) + Electric immobilizer + 5-speed manual transmission + Max. speed: 115 km/h + Low-range gear + Switchable all-wheel drive + Locking differentials + Center storage box in the cab + Radio + Air intake snorkel + Wind deflectors + 4-cylinder Iveco turbo diesel, 2798ccm; 122 hp, Euro 2 + Unladen weight: 3,040 kg; permissible total weight: 3,500 kg + 600 cm x 205 cm x 280 cm (l x w x h) + Tires: 8.25 R16 LT Vehicle from second owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale! Godpszvqr Hefx Ak Ueug

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Guodpfx Akszd Rmgo Usg Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 109,516 km, power: 118 kW (160.44 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,009 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Iveco 35C16 Box Van with Tail Lift, 750 kg, Sörensen Side door * Box dimensions: L 4.30 m, W 2.10 m, H 2.30 m * 3.0L engine * Dual tires * Leaf spring suspension * Quad-link torsion bar suspension * Side door * Radio/CD MP3 * On-board computer / trip computer * 3-seater * Automatic climate control * Driver's seat with suspension / synthetic leather * Cruise control * Electric windows Godezzg H Rspfx Ak Ujug * Central locking with remote control * 6 gears * Gross vehicle weight 3,500 kg * Wheelbase 4100 - Sale only to commercial businesses and/or for export - Subject to prior sale and/or errors

Condition: used, mileage: 352,489 km, power: 120 kW (163.15 HP), first registration: 04/2016, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 2, total length: 7,320 mm, total width: 2,350 mm, total height: 3,300 mm, loading space length: 4,450 mm, loading space width: 2,150 mm, loading space height: 2,370 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, central locking, electric window regulation, tail-lift, traction control, = Additional Options and Accessories = - Halogen lamp - None - Tail lift Gsdpfozzkynex Ak Uoug - Manual - Radio/cassette - Reversing camera - Fabric = Notes = Configuration: 4x2, Payload: 840 kg, Unladen weight: 2660 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Type of cabin: Single cab, Number of airbags: 1, Parking assistance: None, Electric windows, Radio/cassette, Color: White, Reversing camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 120 kW (161 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Load capacity of the tail lift: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 220 x 160, ENGINE-DEFECT Box van, Tail lift, Side door!, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: VSV-30-F Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm; Suspension: Coil suspension Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,660 kg Payload: 840 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 750 kg Height of loading area: 86 cm Condition Overall condition: moderate Technical condition: moderate Optical condition: moderate Damage: Damaged vehicle (not drivable) Number of keys: 1

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, PLEASE ONLY SERIOUS ENQUIRIES REGARDING VIEWINGS OF THE PRODUCTION LINE! WE DO NOT INTEND TO DISMANTLE THE LINE IN JANUARY; THE ADVERT COULD NOT BE PROGRESSED OTHERWISE. I am offering for sale a completely unique production line in Hungary. 1. The line manufactures trays suitable for storing 10 eggs, in either continuous or batch operation. From raw material preparation to final delivery, we are offering a complete system for sale. 2. The egg tray production line is located in Bátonyterenye, where a fully serviced industrial site provides all the infrastructure necessary for production. 3. The total output of the line is sold on the domestic market. The complete egg tray production line consists of several units: - Material preparation system, which processes waste paper into mouldable raw material. Godpfsya Eh Eex Ak Usug - HGHY egg tray forming unit, which finalises the trays by drying and hot-air pressing after moulding. - Palletising system, which makes the finished trays ready for transportation. - Auxiliary systems for air, vacuum, power, gas, and water supply.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, overall weight: 2,947 kg, number of axes: 3, This 3-axis Mitutoyo Crysta-Apex S9166 was manufactured in 2018. It features a comprehensive measuring range with X-axis at 900 mm, Y-axis at 1600 mm, and Z-axis at 600 mm. Equipped with CNC control and MCOSMOS-3 CNC V4 software, it includes a Renishaw PH10MQP R2 indexing probe head and SP25M scanning probe system. Additional equipment includes eco-fix CMM fixturing systems and a high-capacity CEE power cable. Consider the opportunity to buy this Mitutoyo Crysta-Apex S9166 CMM machine. Contact us for more information. • Control & software: CNC control; MCOSMOS-3 CNC V4 • Probe system: Renishaw PH10MQP R2 indexing probe head; SP25M scanning probe system; multiple stylus holders (SH25-2); starter probe kit (M3); ceramic calibration sphere Ø20 mm (with factory certificate) • Option: Gear measurement option purchased in 2021 • Condition/usage: Machine was in the quality control room for final inspection Guedpfoydm Hkjx Ak Ueg • Mounting plates: All aluminum mounting plates installed on the measuring machine Additional equipment • Workstation (PC, keyboard, mouse) • 2× HP 23" monitors (1920 × 1080) • USB dongle / Wibu-Box license • eco-fix CMM fixturing system (kits S and L) • Quick-rail base kit • J/S Box-M Type A • High-capacity CEE power cable • Various buttons, 5-10 pieces (6 adapter plates)Height-adjustable desk1 tool trolley with contents3x large aluminium plates 800x40030 small aluminium plates with various fixtures. 250x250Centre clamp vice / 3-jaw chuck, etc.

Condition: excellent (used), mileage: 548,000 km, power: 279 kW (379.33 HP), first registration: 03/2008, axle configuration: 8x4, color: yellow, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 8,700 mm, total width: 2,500 mm, total height: 3,270 mm, Year of construction: 2008, Equipment: ABS, EBS, air conditioning, differential lock, electric window regulation, = Additional Options and Accessories = - Leaf spring suspension - Differential lock - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sun visor - Central lubrication system = Additional Information = Suspension: Leaf spring suspension Front axle 1: Steerable; Tire tread left: 90%; Tire tread right: 90% Guedpfxjzzyils Ak Uog Front axle 2: Steerable; Tire tread left: 30%; Tire tread right: 30% Rear axle 1: Dual tires; Differential lock; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Reduction: External planetary axles Rear axle 2: Dual tires; Differential lock; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30%; Reduction: External planetary axles Number of cylinders: 6 Technical condition: very good Optical condition: very good

Condition: used, maximum load weight: 30,229 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, • Provision of German ATP-IR certificate including film sticker & ATP type plate Gjdpjzz Ekbjfx Ak Uoug • Body HACCP-certified, incl. certificate & sticker • Customs locking device with approval and securing • Bolted underrun protection according to RL 70/221/EEC • Color: White • FERROPLAST body in reinforced version, suitable for intensive refrigeration operations • Axles in the 1st, 2nd, and 3rd positions with axle lift function + 3x brakes • Special support wind gear console for 3-axle tractors • Pallet box for 36 Euro/ISO pallets • Dynamic Ramp Protection (DRP) • Additional pair of mudguards between the axles (plastic) • TrailerConnect service package "Temperature" – 12 months included • Lighting system with 2 LED combination lights + SL2 safety lights • 4 temperature sensors for temperature recording • Fuel filler neck on the right + biodiesel-capable fuel tank • Level indicator -40°C to +40°C, accuracy class 2 according to DIN 16203 • Rear floor plate with 1,000 mm internal stopper • Refrigeration unit: Carrier 1950 MT

Year of construction: 2022, condition: new, Type: All terrain crane Field of application: Construction Extensions (Booms): 9 Hydraulic extensions from mainbreak boom + 5 angle mechanical + gradual curve 6 Hydraulic extended from break boom (In each crushing group - 2 mechanics each) Section : Octagonal (octagonal) max. Load control, max. resistance Material : Strenx 960 Vertical Boom / Main Boom : Strenx 700 Support Feet: Gear Bottom Side: 2 Pieces Hydraulic Opens and Presses Under the chassis: 2 Hydraulic Opens and Presses 5-6 Legs: 1 Piece Hydraulic Opening and Pressing (Box with Boom Press – Long Opening) For detailed information please contact us Gsdpfx Akjpa Rpue Ueug

Condition: ready for operation (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM1400 2.000 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 1.400x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Gjdpfx Aehun U Uek Ujug Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 10 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: used, mileage: 13,854 km, power: 92 kW (125.09 HP), first registration: 05/2012, fuel type: electric, empty load weight: 2,735 kg, maximum load weight: 1,265 kg, overall weight: 4,000 kg, axle configuration: 4x2, fuel: electricity, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Vehicle will not shift gears! The vehicle was converted to electric operation at 108,564 km. Total mileage: 122,418 km Manufacturer: Bosa Type: LF150 450V Capacity: 40 kW/h Range: 100 km Gsdpfx Aot Syuijk Usug The used Iveco Daily 35 S11 C30C ELECTRIC was converted to electric drive by Orten Electric Trucks in August 2021. Equipped with a Bosa LF150 450V motor and a battery capacity of 40 kW/h, the vehicle offers a range of approximately 100 km. Its total mileage is 122,418 km, with the conversion taking place at 108,564 km. The vehicle features a summer box body with shelving, rear air suspension, and a reversing camera. With an output of 92 kW/125 hp and an automatic transmission, the yellow van is ideally suited for commercial use. The vehicle measures 6,783 mm in length, 2,177 mm in width, and 2,770 mm in height. With a permissible total weight of 4,000 kg, it offers sufficient capacity for various transport needs. Viewings are possible without prior registration, and a registration service is offered. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Rabolini Imperia B2 Heavy-Duty Platen Die Cutter / Creasing Press Short Technical Description / Summary Professional Italian-made Rabolini Imperia B2 platen die cutting machine ("clamshell" press). Renowned for its robust cast-iron frame construction and high cutting impression force. Ideal for die-cutting, creasing, scoring, and embossing on paperboard, solid cardboard, corrugated board, micro-flute, and plastic sheets. Key Technical Specifications Manufacturer: Rabolini (Imperia) Model / Brand: Imperia Format Size: B2 (approx. 520 x 720 mm ) Country of Origin: Made in Italy Machine Type: Clamshell Platen Die Cutter / Creasing Press Drive Mechanism: Heavy-duty motor drive with flywheel, clutch-brake unit, and reduction gear Operating Modes: Single stroke, continuous operation, and timed dwell (dwell timer) Compatible Materials: Cardboard, solid board, corrugated fiberboard, plastics (PP/PVC), foam board Features & Equipment Ergonomic top control box mounted on a movable arm for easy setting adjustments. Dwell timer to adjust the platen open time during manual feeding. Hardened steel cutting plate mounted on the movable platen. Integrated safety frame / sensitive guard bar system protecting the operator area. Centralized lubrication system for smooth, continuous operation. Guedpozur Dbsfx Ak Ueg Condition & Availability Condition: Used, fully complete and intact. Sourced directly from print shop production.

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container Gsdpfx Akozq S Ife Ueug – Swivel arm extension 800 mm – Swivel arm height increase 300 mm – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement

Condition: good (used), Power take-off gearbox, hydraulic pump gearbox, gearbox, spur gear gearbox, reduction gearbox -Translation: 1:4 -for: hydraulic pump Gsdpfxjb A N Aue Ak Uoug -PTO shaft input: 35 mm -Splined shaft output: 25 mm -Weight: 6 kg