Used Cronosstech H-Type 150/50 Ton Hydraulic Deep Drawing Press for sale (100,682)

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, shovel volume: 5 m³, Year of construction: 2016, operating hours: 9,118 h, machine/vehicle number: VCEL150HH00005075, Equipment: AdBlue, air conditioning, The wheel loader's tires have been renewed! Ppedpex Tqm Ijfx Ahyer TECHNICAL DETAILS Bucket capacity: 5 m3 MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 9.1 m x 3.2 m x 3.9 m Unladen weight: 26,100 kg Fuel type: Diesel Engine brand: D13J Emissions level: Stage IV / Tier IV final Chassis type: Articulated Operating hours: 9,118 h EQUIPMENT Air conditioning AdBlue system CE marking

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine Pjdpjq Nx E Sofx Ahyepr After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: Psdpfxoq Nyuvj Ahyepr - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Ppedpfx Aov Ac Tyohysr -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder stroke 150 mm -Type: HN3-GHI 80/55-150 DH -Piston rod: Ø 55 mm / M34 Ppjdpfov N E Igjx Ahyer -Hole: Ø 40 mm -Dimensions: Ø 128 x 545 mm -Weight: 24.4 kg

Condition: good (used), Car jack, jack stand, lifting jack, bottle jack, mechanical jack, axle jack -Manufacturer: Holmatro, Mechanical jack 50 ton Pjdpfx Ahei Hmnzeyepr -Type: JJ-5013 -Stroke: 125 mm -Shaft: Ø 87 mm -Number: 3x lifting jack available -Price: per piece -Dimensions: 280/220/H295 mm -Weight: 30 kg/piece

Condition: good (used), Car jack, jack stand, lifting jack, bottle jack, mechanical jack, axle jack -Handover: in the current condition as viewed Pedpji Huv Eefx Ahyopr -Handle: repaired, see photos -Manufacturer: Osaka, Mechanical Jack 50 ton -Stroke: 130 mm -Piston: Ø 87 mm -Number: 1x lifting jack available -Price: per piece -Dimensions: 270/220/H290 mm -Weight: 31 kg/piece

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Ppsdpox Eifkjfx Ahyjr Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: used, Year of construction: 1988, sheet width 150 mm coil weight t coil internal dia. mm total power requirement kW weight of the machine ca. t Ppjdpsr Eth Isfx Ahyjr dimensions of the machine ca. m

Condition: ready for operation (used), Robo Cylinder RCS-SM-A-150-H-600-X09 Actuator, slight damage to the housing see photo,, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos Ppsdpfxei Ec Dio Ahyor

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Podpfx Ahewq Shbsyspr Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Ppjdpfx Aevr Eicjhyjr Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Podpfx Aeyw Aa Iohyjpr

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Ppjdpfx Ahewin Emjyor Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Ppodpfxsvbdyfs Ahyor Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: like new (used), Year of construction: 1991, input voltage: 200 V, pressing force: 3 t, operating speed: 47 mm/s, table width: 410 mm, table length: 320 mm, throat depth: 125 mm, oil tank capacity: 6 l, total length: 735 mm, total width: 505 mm, total height: 987 mm, for sale in new condition ATSUGI 3 ton Hydraulic Press Pedpfx Ahov Sd Aneyspr Atsugi Model AP-3-M Used load range: 6-30 (kN) Stroke: 150mm Down speed: 46.7 (mm/s) Up speed 56.7 (mm/s) two-handed operation mobile workbench Operating area: Open height: 250mm open depth: 125mm table size: 410x320mm Motor specification 3 phase AC200V 4P 1.5KW two-handed operation . mobile workbench Operating oil / quantity: 6 Liter Total weight (kg) 200 Body size ​ Height (mm) 987 width (mm) 505 Depth (mm) 735

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Ppsdpfx Aefnk I Eshysr -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs Pedpfxjvu Sqxo Ahyopr -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Ppodpfxoyabf Hj Ahyer

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Pjdpfx Asqy E I Rehyopr

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: Ppedpoy Hgkpofx Ahyjr 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Operation: foot pedal or hand switch. The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: SO151003, sheet thickness (max.): 3 mm, warranty duration: 36 months, cutting length (max.): 1,500 mm, lateral stop: 1,000 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Electric guillotine shear ShearOne E1500x3 CoastOne - Made in Finland Psdpfx Ahjy A Nt Esyjpr Electric guillotine shear ShearOne 15 - Made in Finland 1500mm x 3mm TC15 touchscreen control - Sheet metal holding - Automatic cutting gap adjustment

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Psdsd Sti Ajpfx Ahyspr -Martonair type: 167-05 5000-1 -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Max. Pressure: 16 bar -Stroke: 1150 mm -Dimensions: 75/75/1340 mm -Weight: 9.6 kg

Condition: new, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: HorizOne50_3, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Ppodpfxjy A Nnis Ahysr 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm Pedpfx Asvxtrxshyspr