Used Coil Line for sale (11,244)

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: Gkodpfx Akoz E S Hheysc • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Logsorting line with 19 sorting pockets, electrically driven kickers, never installed and used. For sale full mechanical part of the line, metaldetector, no operating equipment. Log scanner with control system can be offered separately. Line installation and start-up can be offered as turn-key project Gkodpoz Dgk Ssfx Akysc

Condition: used, COMPLETE BULK MATERIAL PROCESSING & BAGGING PRODUCTION LINE FOR SALE Complete production line suitable for the processing, mixing and bagging of bulk materials including peat, bark, stone, sand and other suitable materials. Gkjdpjz H Ty Eefx Akyec The line includes: • B+C form, fill & seal bagging machine • Holding hopper/s • 2 × fertiliser dosing machines • Mixer • Mill • Bag pressing machine • Palletiser • Hooder • Air compressor • Big bag filling machine – adjustable capacity up to approximately 3 cubic metres • Conveyors and associated equipment Located in Ireland outside Rathangan Co. kildare is and available for inspection by appointment. Suitable for businesses involved in bulk material processing, fertiliser, peat, bark, aggregates or similar products. Further technical specifications, dimensions and operating information available on request.

Condition: reconditioned (used), Year of construction: 2000, Fritsch CTR croissant production line, manufactured in 2000. The line includes: 1. Fritsch calibrator KK 88-700-L 2. Fritsch infeed conveyor with flour dispenser 3. Fritsch cutting and rotating unit CTR-700-30-L 4. Fritsch winding machine for filled products FRH-400-L 5. Fritsch winding machine for unfilled products CRH-120-400-L 6. Fritsch filler Used and refurbished. Manufactured in Germany. Price upon request. Godpfxez Ia Nvo Akyjkc

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm Gjdpez Hd Tpofx Akyokc

Condition: excellent (used), Year of construction: 2010, 570 USED KÖNIG Artisan SFC line for ciabatta, bread, and square rolls. Gsdpfjz Ezdiox Akyjkc TECHNICAL DATA: - year of production: 2010 - power: 0.75 kW - power supply: 3x400V +N/PE 50Hz EQUIPMENT: - dough divider - longitudinal cutting rollers - guillotine - water spraying system - rotary table for seed coating The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 34/1998, type of input current: three-phase, input voltage: 380 V, total length: 21,300 mm, air demand: 34 m³/h, Complete used packaging and palletizing line, perfectly integrated and operational, ideal for granular, powdery, and similar products (soil, fertilizers, peat, nutshells, and bulk materials for agricultural and industrial use). Godpoz E Dagefx Akyjkc The system includes all process stages: 16 m³ peat hopper with clod-breaking devices, 0.8 x 13 m conveyor belt, Loro & Parisini hammer mill model M66 (30 kW), 10 m³ feed hopper, 0.8 x 14 m feed belt for the bagging machine, ESSEGI bagging machine model CTS 80 (serial no. CTS 80 34/98, year 1998, 11 kVA) with forming tubes for 10-20-45-70 liter bags, ESSEGI bag compactor, TMG palletizer model SIRIO 1S80 (serial no. 2.500.12.98, year 1999, 14 kVA), ROBOPAC wrapping machine model AVR 201/ATS with rotating arm, pre-stretch, and top anti-drip function, rotating pallet discharge platform with roller conveyor, dust extraction system, electrical systems, and compressed air system (compressor excluded). The system is already operational, previously purchased and used by the company for producing bags ranging from 10 to 70 liters, and is in good overall condition. Estimated capacity is 350–500 bags/hour, depending on the product and format. Photos, layout drawing, and further technical documentation are available upon request. Price negotiable. The entire system is being sold as a complete unit.

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." Gsdsz Hm Ipspfx Akyskc More items - new and used - can be found in our shop! International shipping costs on request!

Condition: refurbished (used), RISCO + TOWNSEND Godpfx Akef T R Dzsyokc ID.NO. 0941 Risco line with Townsend RT 74 Sausage line with very high capacity. In good condition taken directly from production.

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long Gkjdpfx Akegvu Aleyec - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: excellent (used), Year of construction: 2023, Pressing Lines for automatic multi-(2-3)-layer parquet production. Gksdpfx Aoggflcekyec

Condition: good (used), Complete line available which was producing toffee apples for the leading producer in England. Toffee apples and candy apples were supplied to several leading supermarket chains. Line consists of cooking vessels for the toffee, robotic pick and dip lines to insert the sticks into the apples, pick them up, dip them in the toffee and then place them onto the cooling belt then the products are conveyed into flowwrappers. Videos available upon request. Gedspitkkepfx Akyskc

Condition: used, Chuck flange 300 mm KK8 Gkjdpfsrqwquox Akyjc

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Gksdotp H Erepfx Akyoc Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D Gksdpfx Ajn Utt Hskyjc * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers Gksdpfxoiyytqs Akyoc compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Condition: excellent (used), Year of construction: 2015, Brand: Makor Type: Robospray Twin Gkodpfx Asiu Hbnskyec Year: 2015 Inner dimension L: 670 cm Inner dimension W: 330 cm Inner dimension H: 213 cm Exhaust system: Yes Electric connection: 400 V Dimension L: 11000 mm Dimension W: 4600 mm Dimension H: 4500 mm Includes - 2x electric foil roll-off units; - 1x Beerepoot mobile roller conveyor

Condition: excellent (used), Gluing line OBEL-P gluing length - up to 3 m Godpfxsirm Rhs Akyokc gluing width - up to 200 mm The OBEL-P gluing line is a high-frequency (HF) press system designed primarily for applications in woodworking, particularly in the window and door industries. Known for its versatility, it can process materials such as window scantlings, laminated wood beams, and glue boards. OBEL-P’s HF gluing lines are manufactured with a range of configurations, from manual to fully automated setups that handle tasks like automatic loading, gluing, pressing, and stacking, maximizing efficiency and minimizing manual intervention. Key specifications for OBEL-P gluing lines include adjustable HF output ranging from 40 to 200 kW, rapid glue application speeds up to 300 meters per minute, and modular designs that allow for additional automation as needed. These lines can achieve high production capacities, with some systems producing up to 150 m³ of output per shift.

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor - Block tilter Gjdpfsiiciqox Akyjkc - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Year of construction: 2004, condition: used, High-performance band resaw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roll diameter 1250mm Roll width 150mm Gkjdpfodfcryox Akyjc Saw blade speed: 28-50 m/s Connected power: approx. 45kW Feed rollers 2x4 Roller height 200mm Cutting height up to the lower edge of the pressure guide: 400mm and higher Cutting width 250mm to the left of the saw blade and 250mm to the right of the saw blade with center cutting device complete technical documentation Original photos will follow.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Gedpfsq H Shcox Akyjkc Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Gksdpfx Ajk Abnvokyjc Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm Gsdpfx Akel H Hy Hjyokc - length of processed log 1250 mm - 6000 mm - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation

Condition: good (used), Marel Townsend Stork rotary crumbing machine in lovely condition. Gkodpfemqk Twex Akyec

Condition: new, 0 1170 x 580 x 580 mm Gkedpfxjupxd Ds Akyec operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t