Used Clifton Clifton Unstirred Water Bath for sale (7,617)

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge Djdpfx Alevptt Rebjcl - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Dcjdpfevpuvgex Albel Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: used, machine/vehicle number: LC521, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Dcedpfx Alsvgu Tysbol Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area Dsdpfx Aovvl Ugelbocl • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: used, Year of construction: 2005, functionality: fully functional, 1,0 St. gebr. Temperiergerät Dcodpfxoxyt Tzs Albol Hersteller: REGLOPLAS Typ: P160/9/SG51/1K/RT50 Baujahr: 2004 Medium: Wasser Temperatur: 160° C

Condition: used, This listing is for a Millipore AFS 15E Water Purification System with 60l Tank. The unit is in full working condition and is ready for immediate release. The Millipore AFS 15E is designed to deliver high-quality Clinical Laboratory Reagent Water (CLRW) efficiently and economically, making it essential for laboratories that adhere to rigorous standards. Dcsdpfoxxy Szex Albol Key Features: CLRW Compliance: Produces water that meets the Clinical and Laboratory Standards Institute (CLSI) guidelines, ensuring reliability in clinical settings. Elix® EDI Technology: Utilizes advanced electrodeionization (EDI) for low and predictable operating costs, coupled with self-regenerating ion exchange resins that reduce maintenance. Data Monitoring: Equipped with full monitoring capabilities, the system archives water quality data for up to six months, allowing for easy tracking and compliance verification. Feed Water Quality: Accepts potable water with a pressure range of 1–6 bar and a temperature range of 5–35°C, ensuring versatility in various setups. Storage Capacity: Comes with a 60L tank, providing ample storage for the purified water, which is crucial for laboratories with high water demands. Specifications: Production Capacity: Generates up to 300 litres of water daily, catering to high-throughput needs. Production Flow Rate: Delivers water to the reservoir at 15 L/h. Distribution Flow Rate: Dispenses water to analysers at up to 2 L/min, ensuring quick access when needed. Product Water Quality: Resistivity at 25°C: > 15 MΩ·cm, indicating high purity. Total Organic Carbon (TOC): < 30 ppb, suitable for sensitive analytical applications. Dimensions: Compact size of 585 x 268 x 426 mm (23 x 10.6 x 16.8 in) enables easy integration into laboratory spaces.

Condition: used, This listing is for a Star Lab N2400-4002 Dry Bath System. The unit is in full working condition and is ready for immediate release. The Star Lab Dry Bath System N2400-4002 is a dual block dry bath system designed for various laboratory applications. It is part of the Star Lab Dry Bath System series, which offers great value and convenience for users. Key Features: Dual Block System: The N2400-4002 features two blocks, allowing for simultaneous heating of multiple samples. Digital Microprocessor Controller: The system is controlled by a digital microprocessor, ensuring precise temperature control. Dcedpfx Aexxzg Tolbol Temperature Range: The system can operate at temperatures ranging from 5 °C above ambient to 150 °C. Temperature Accuracy: The temperature accuracy is ±0.2 °C, ensuring reliable results. Timer: The system features a timer that can be set from 0 to 999 minutes. Safety Device: The system is equipped with a leak-proof heating chamber, ensuring safe operation. Power Consumption: The system consumes 200 W of power. Dimensions: The system measures 200 mm x 298 mm x 80 mm (W x D x H). Weight: The system weighs 2.8 kg. Applications: Heating and boiling Restriction digests Denaturing DNA Melting agar Coagulation studies In situ hybridisation Hot Start thermocycler reactions

Condition: used, This listing is for a Hanna Instruments HI 9060 Waterproof Thermistor Thermometer The unit is in full working condition and is ready for immediate release. The Hanna HI 9060 is a high-performance thermistor thermometer specifically engineered for use in challenging wet and humid environments. Its robust design and advanced features make it an essential tool for professionals in the food industry and other applications requiring precise temperature monitoring. Key Features: Waterproof and Rugged Design: Built to withstand harsh conditions, the HI 9060 is waterproof and can endure the rigors of busy environments, ensuring reliability in various settings. Dual-Level LCD Display: The intuitive dual-level LCD display shows the current temperature alongside the highest and lowest temperature extremes recorded during the session, allowing for quick assessments. Temperature Measurement: Measures temperatures in both degrees Celsius and Fahrenheit, providing flexibility for diverse applications. Interchangeable Probes: Compatible with a range of interchangeable probes (sold separately), enabling users to customize the thermometer for specific tasks or environments. Advanced Memory Functions: Equipped with memory capabilities that store high and low temperature readings, facilitating easy tracking and reporting of temperature variations. Long Battery Life: Enjoy an impressive battery life of up to 3000 hours, minimizing the need for frequent replacements and enhancing operational efficiency. Auto-Off Capability: Dcjdpfxoxxz Hts Albel The thermometer features an auto-off function that conserves battery life by shutting down after a period of inactivity. Low Battery Detection: Alerts users when battery levels are low, ensuring that the thermometer is always ready for use. Ideal Applications: Food Services: Essential for monitoring temperatures in kitchens, ensuring food safety and compliance with health regulations. Food Preparation: Perfect for checking temperatures during cooking and baking processes, helping to maintain quality and safety. Packaging: Ideal for verifying temperature conditions during food packaging, ensuring that products meet safety standards. Storage and Transport of Food: Crucial for monitoring storage temperatures in refrigerators and freezers, as well as during transit, to prevent spoilage. Wet and Humid Environments: Designed to thrive in damp settings, making it suitable for various applications beyond food service, such as laboratories or agricultural environments.

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath Dcjdpfx Asxzhtrjlbsl

Condition: used, This listing is for a Thermolyne 16500 Dri-bath DB16520 The Thermolyne 16500 Series Dri-Bath (Model DB16520) is a laboratory dry block heater designed for applications requiring precise, stable temperature control for sample incubation, enzyme reactions, and other heating applications, without the need for water. It is part of the Barnstead/Thermolyne brand, recognized for its modular block design and high-quality construction. Dsdsxzh Nmspfx Albecl

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, cooling capacity: 300 kW (407.89 HP), type of input current: AC, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 8 bar, pump pressure: 3 bar, total width: 2,257 mm, total length: 9,003 mm, total height: 1,559 mm, control cabinet height: 1,559 mm, Equipment: cooling unit, We are dismounting a Steam methane Reformer plant for hydrogen. In this case we have one Kelvion Adiabetic Air Cooler - Cooling Water. Technical information in the documents attached. Dcedoxg Ncrepfx Albjl

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Dsdpfxexhfpde Albocl Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Dcsdpsxhfpwefx Albel Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. Dodpfx Asrm Ilfolbscl The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: excellent (used), The reverse osmosis unit is capable of a flow rate of up to 2.0 m³/h by producing desalinated water with a conductivity below 10 μS/cm. Storage tank with pump for clean water Conductivity meter for measuring the conductivity of water. Dcsdpfx Aer Dthmolbjl

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Dcedpfx Asr Ezdrelbol Weight: 160kg Water connections reduced to 1/2".

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head Dedpfx Aji U Dxuslbscl 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. Dedec Nkyzspfx Albecl The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1995, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company in accordance with the German Water Resources Act (WHG) Dear Sir or Madam, we offer a 50,000-liter storage tank for the storage of water and wastewater as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer’s certificate according to DIN standard and type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-release coupling according to DIN standard can also be offered. Of course, you can also participate in the design of your tank system! All our systems are extensively inspected and checked by selected employees in our company. We also offer a cost-effective delivery service on request. You are welcome to visit our facilities at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us – one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free loading. Delivery can be offered at a reasonable cost for an additional charge. Delivery time = immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as an approved specialist company in accordance with the German Water Resources Act (WHG), professionally empty, clean, dismantle and remove them. Sincerely, from Warstein Dcjdjc Nkzgjpfx Albol Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: excellent (used), Year of construction: 2004, Cap - Shaving cream dispenser 10x compartment Year of manufacture: 2004 Dodpfx Aloc Nw Rhobscl Very good condition

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head Dcodpfx Alotmp T Dobsl - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum Dcodpfx Aljwiatisbol steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: used, This listing is for a Thermo Scientific Multi Blok heater 2050 1CE The unit is in full working condition and is ready for immediate release. The Multi Blok Heater is a laboratory heating device used to heat samples in tubes, vials, PCR plates, etc., by conduction via a metal block, rather than using a water bath. Dedpoxv Adujfx Albscl “2050” is the model number, while “1CE” (or “1CEQ”) denotes a single‑block, CE‑certified version suited for use with one interchangeable modular block. The device is compact and bench‑top, intended for fixed temperature incubations, sample pre‑heating, enzyme reactions, and other lab protocols where stable heat is required.

Condition: used, This listing is for the Grant SAP 2S SUB Aqua Bath The unit is in full working condition and is ready for immediate use The Grant SUB Aqua Pro 2S is a compact, high-performance digital water bath ideal for laboratory applications requiring precise temperature control. Designed to meet the rigorous demands of research, education, and quality control, this model offers a value-for-money solution without compromising on quality or functionality. Key Specifications Tank Capacity: 2 litres (shallow format) Working Area (L x W): 139 x 289 mm Overall Dimensions (L x W x H): 215 x 335 x 150 mm Temperature Range: Ambient +5ºC to 99ºC Stability (DIN 12876-3 @ 70ºC): ±0.2ºC Resolution: 0.1°C Control: Digital, with programmable presets Weight: ~3 kg Voltage Options: 120V or 230V Included: Lid and base tray Dcjdpfexv Dbbsx Albel Safety Features: Dry start/run dry protection Over-temperature alarm High-temperature safety cut-out

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up Dcsdpfx Alexbgvfebjl - Practical training to BUYER’S staff on the machine functions