Used Cape Cape 4-Disc End-Trimmer for sale (65,118)

Condition: used, Year of construction: 1985, Altendorf panel saw F 45, Year of manufacture: 1985 Machine number: 85-4-122 Motor: 5.5 kW / 400 Volt Knsdpjzx R N Djfx Ahgob Scoring unit: 0.75 kW Cutting length: 2800 mm Cutting width: 1250 mm Raising/lowering and tilting up to 45° via handwheel Spindle speeds: 3, 4, 5 and 6000 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm Parallel fence Table extension: 800 mm Miter gauge

Condition: new, Year of construction: 2025, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T411592, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, saw blade diameter: 3,150 mm, cutting length (max.): 3,200 mm, Equipment: scorer, F25 basic configuration - Manual height and tilt adjustment of the saw blade from 0 to 46°, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package Type 4 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence Digit – X, 1,410 mm - Large extraction hood (PSV) - Scoring unit Basic with LED lighting Kodpfowwuamjx Ahgsnb

Operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, suspension: air, brakes: other, operation weight: 26,000 kg, construction height: 4,000 mm, construction width: 3,000 mm, conveyor belt length: 7,000 mm, ejection height: 2,600 mm, transport length: 19,400 mm, number of axes: 3, Equipment: ABS, Dosing/Blender system 4 chambers, trailer device RD700M, Output power up to 700 to/h material mix, Dosing control up to 999 recipes, Mixing plant for RC and aggregate for the production of mixed lines such as antifreeze, gravel base course, factory mixed concrete aggregate, screed sand 2-8, Drainage filter layers, base courses for railway construction, recycling lines, with automatic control for fast truck direct loading from the driver. Ksdodvm Agopfx Ahgonb

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: type plate available, The Donaldson Torit dust extraction unit DFO 4-16 can be used for welding, cutting, and grinding. Knsdjzwclzopfx Ahgeb It is a non-ATEX unit. The accompanying fan is an ART 632 with a 22 kW motor (non-ATEX), designed for a flow rate of 16,500 m3/h. It was previously used in one of our factories for welding fume extraction. It has since been replaced by dilution systems and is therefore no longer needed.

Condition: like new (used), System: Chamber filter press, laboratory press Application area: Chamber filter press, pilot plant Design: side-bar guided Type: REWA Filter plate size: 150x150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Cake thickness: 15 mm Filter cloths: optionally available tailored to the medium Discharge: open Filter area: approx. 0.2 m² Press content: approx. dm³ Plate transport: manual Pump technology: included - optional Purchase or rental: Inspection of the systems by appointment at our facility. Condition: Demonstration unit, as new Weight: approx. 70 kg Length: approx. 70 cm Width: approx. 40 cm Height: with frame + pump approx. 85 cm Knjdpfx Ajwqzibohgeb Miscellaneous: Would you like to rent, lease, or buy this system? Contact us, we are happy to be at your disposal.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 820 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total width: 2,160 mm, table width: 254 mm, table length: 1,370 mm, table load: 300 kg, overall weight: 1,260 kg, spindle speed (max.): 4,200 rpm, product length (max.): 2,400 mm, number of axes: 3, This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details. - Description: 3-axis manual conventional milling and drilling machine with sleeve feed, tiltable milling head, rotatable spindle head carrier and position indicator- Face Cutter Capacity: max. Ø 76 mm- End Mill Capacity: max. Ø 25 mm- Drilling Capacity (Steel S235JR): Ø 24 mm- Continuous Drilling Capacity (Steel S235JR): Ø 20 mm- Throat Depth: 0 - 420 mm- Quill / Sleeve Stroke: 127 mm- Spindle Taper: ISO 40 - DIN 2080- Spindle Speed: 60 - 4200 rpm (min-1)- Gear Steps: 2 / continuously variable in steps- Automatic Quill Feeds: 0.04 | 0.08 | 0.15 mm/rev- Motor Power: 2.2 kW | 400 V - 50 Hz- Milling Head Tilt (Front / Back): +/- 45 degrees- Milling Head Tilt (Left / Right): +/- 90 degrees (horizontal)- Ram Overarm Travel: 470 mm- Distance Spindle to Table: max. 405 mm- Table T-Slot Size / Pitch / Qty: 16 mm / 63 mm / 3- X-Axis Travel (Manual / Power Feed): 820 mm / 740 mm- Y-Axis Table Travel (Manual / Power Feed): 410 mm / 330 mm- Z-Axis Knee Travel (Manual / Power Feed): 400 mm / 320 mm- Main Motor Power: 2.2 kW (400 V / 3 Ph / 50 Hz)- Coolant Pump Power: 90 W- Included Accessories: Coolant system, chip tray, and operating tools Knsdpezq Dk Ejfx Ahgeb Technical Specification Taper Size ISO 40

Condition: good (used), mileage: 870,595 km, power: 169 kW (229.78 HP), first registration: 02/2009, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 10,220 mm, total width: 2,550 mm, total height: 3,720 mm, loading space length: 7,680 mm, loading space width: 2,530 mm, Year of construction: 2009, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Leather / Fabric - Manual - Pump - Central lubrication = Notes = Number of axles: 3, Configuration: 6x2, Payload: 16410 kg, Tare weight: 10590 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 420 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 10 tons, Central lubrication, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Flashing lights, Engine power: 169 kW (227 hp), Fuel: Diesel, Euro: 4, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Clutch pedal, Power steering, ABS, Pump, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Leather / Fabric, Seat adjustment: Manual, 6x2*4 Airco NL-Truck = Additional Information = Transmission Gearbox: SCA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm; Suspension: Leaf suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 9 mm; Tire tread depth left outside: 6 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 7 mm; Suspension: Air suspension Axle 3: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 13 mm; Tire tread depth right: 10 mm; Suspension: Air suspension Weights Tare weight: 10,590 kg Payload: 16,410 kg GVW: 27,000 kg Functional Load platform height: 128 cm Pump: Yes Maintenance APK (Technical Inspection): valid until 02/2027 Condition Technical condition: good Kodpfxjz Aa Auo Ahgsnb Optical condition: good Damage: none Number of keys: 1 Identification License plate: BV-VD-15 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 1984, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,200 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: hydraulic, saw blade bore: 30 mm, actuation type: hydraulic, overall weight: 1,200 kg, Equipment: saw blade guard, scorer, Cutting length / carriage length 2800 mm Cutting length according to scale 2850 mm Cutting width at parallel fence 1200 mm, manual adjustment Drive motor 5.5 kW, 400 V, 50 Hz Saw blade speed 3/4/5/6000 rpm Max. tool diameter 450 mm Cutting height at 90° = 0-150 mm Cutting height at 45° = 0-107 mm Kodpfxez At Rle Ahgenb Saw blade swivel with optical angle indicator Speed indicator with optical display Hydraulic height and swivel adjustment via foot pedal Parallel parallelogram guard with narrow and wide guard Dust extraction connection on top 80 mm, dust extraction connection on bottom 120 mm Scoring unit

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional Knedpfxjzx Ehzj Ahgeb SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Please get in touch for more information or additional photos.

Condition: like new (used), FISHBAM Double-Door Static Autoclave / Cooker – 4 Cages FISHBAM double-door static autoclave / cooker with a capacity of 4 cages, designed for the cooking, pasteurization, and heat treatment of food products in industrial batch processes. Its double-door configuration allows for loading from one end and unloading from the opposite end, facilitating the organization of the production flow and its integration into facilities with separation between entry and exit zones. The equipment features a large-capacity horizontal chamber, industrial-grade construction in stainless steel, and an automatic system for controlling process parameters. MAIN FEATURES -Manufacturer: FISHBAM -Type: Industrial static autoclave / cooker -Capacity: 4 cages -Configuration: double door -Static operation -Batch heat treatment -Horizontal chamber -Stainless steel construction -Large-diameter doors -Mechanical safety locking system -Automatic process control -Integrated control panel -Pressure indicators -Process piping and valve system -Designed for industrial operation -Integrable into cooking and heat treatment lines PROCESS The 4-cage FISHBAM is designed to perform controlled heat treatments on food products. The loaded cages are placed inside the chamber, and once closed, the programmed cycle is executed, controlling the different phases of the treatment. Depending on the application and equipment configuration, it can be used for cooking, pasteurization, and other batch heat treatment operations. The double-door configuration allows for establishing a continuous workflow, with loading and unloading from opposite sides of the equipment. It can be integrated with: Cage loading and unloading systems Cage conveyors Transfer systems Cooking lines Cooling systems Product handling equipment Complete food processing lines APPLICATIONS Knjdpfx Aeyufk Nohgsb Especially suitable for canning industries, fish and seafood processors, meat products, vegetables, ready meals, and other food industries that require industrial batch heat treatment processes. The combination of 4 cages, static operation, and a double door provides a particularly interesting solution for facilities that need high processing capacity and an organized flow between the loading and unloading areas. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, empty load weight: 9,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 9,450 mm, suspension: air, tire size: 235/75 R17,5, color: red, Equipment: ABS, EBS Drum brake Kjdpfx Aezzdx Djhgenb Loading area width 2,550 mm / 3,000 mm Payload 30,600 kg Electro-hydraulic pump unit with NATO connector Hydraulic ramps with lateral movement Hydraulic support legs SAF axles Excavator bucket body Extendable to 3 m Loading edge height 910 mm New price: €72,000.00 net Subject to change.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, JAESPA bandsaw MSU 4 Continuously variable cutting speed from 12 - 2500 m with 2 gear stages and a 2-stage motor. Band welding system. Table adjustable in 2 directions. Table size: 615 x 615. Overhang: 405. Cutting height: 450. Lighting, emergency stop, documentation, 1 roll of saw blade. Condition: very good, runs smoothly and quietly. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen. Knjdpfx Ahoz Dbgzsgob

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1969, machine/vehicle number: HS 205-4, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 900 mm, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 175 bar, overall weight: 2,500 kg, total length: 2,600 mm, total width: 1,950 mm, total height: 1,400 mm, Equipment: emergency stop, foot remote control, A Wila brand plate shear in very good condition. It is comparable to the Safan brand. The machine is somewhat older. The back gauge moves very smoothly, but currently needs to be adjusted manually. It does not have a drive mechanism. Knodpfez Dgttex Ahgjb

Condition: used, empty load weight: 6,600 kg, axle configuration: 3 axles, first registration: 07/2004, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank semi-trailer - Manufacturer: Magyar - Stainless steel chassis - First registration: 29/07/2004 - Number of axles: 3 - Suspension: Air - Axle type: SAF - Brakes: Disc - Length: 12,330 mm - Width: 2,550 mm - Height: 4,000 mm - Unladen weight: 6,600 kg - Body manufacturer: Magyar - Tank material: Stainless steel - Total tank volume: 30,000 L - Tank compartments: 4 - Insulated - CIP cleaning Kodpsyv Haisfx Ahgjnb

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2019, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 8,790 mm, color: other, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = Ksdpfx Ajz A Udqshgenb - BPW Axles - Disc brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.940 kg Carrying capacity: 38.060 kg GVW: 42.000 kg Maintenance APK (MOT): tested until 11/2026 Identification Registration number: OR-37-ZF

Condition: used, Year of construction: 2025, operating hours: 6 h, power: 82 kW (111.49 HP), Operating hours: 6, First registration: 06/30/2026. New tractor with dealer’s temporary registration before handover. Standard equipment / technical data. Engine: Rated power (ISO) 82 / 110 kW / hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4 l, 4 valves, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - one-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-shifting reversing gear, 4-stage load shifting, Continuously cooled wet clutches with independent lubrication system, Double PTO shaft: 540 / 540E / 1000, Switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / lifting system: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single / double acting, mechanical remote control + 1x single / double acting, neutral, SST, Quick coupler Cat. 3 with balls and catch cups Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lifting struts on both sides and 2 side stabilizers, EHR with external control on both fenders. Electrical equipment: Thermostart, 120 A alternator, Battery disconnect switch, electrical, Power supply (12 Volt) for external devices with connector. Axles / additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Quick-adjusting automatic trailer hitch, Fender outer width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Cab: Vibration-damped standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver’s seat with armrests, rotating adapter, seat belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplers, 3 control valves: 1x MR, double acting, EA, SST + 1x double acting, neutral, SST + 1x double acting, neutral, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Passenger / instructor seat with belt, Air-suspended driver’s seat, automatic adjustment with seat belt, rotating adapter and armrests, Rear window wiper / washer system, Battery. Kedpfx Ahjyvmq Iogonb

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2019, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 8,790 mm, color: other, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - BPW Axles - Disc brakes = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg Knsdjz A Uddopfx Ahgsb Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.940 kg Carrying capacity: 38.060 kg GVW: 42.000 kg Maintenance APK (MOT): tested until 12/2026 Identification Registration number: OR-36-ZF

Condition: used, Used VEM three-phase asynchronous motor with 15 kW power, IE3 efficiency class, and B5 flange mounting. Manufacturer: VEM motors GmbH Type: IE3-W41R 160L 4 C TPM HW Kedpfx Ahezugakegsnb Motor number: 414123 / 0033 H Motor type: Three-phase asynchronous motor Year of manufacture: 11/2017 Rated power at 50 Hz: 15 kW Rated speed at 50 Hz: 1490 rpm Rated voltage at 50 Hz: 400 / 690 V Connection at 50 Hz: Delta / Star Rated current at 50 Hz: 28 / 16.5 A Frequency: 50 Hz Power factor cos φ at 50 Hz: 0.83 Efficiency at 50 Hz: 92.8% Efficiency class: IE3 Number of poles: 4 Frame size: 160L Design: IM B5 Degree of protection: IP55 Thermal class: 155 F/B Weight: 175 kg Bearing, drive end: 6310 ZZ C3 Bearing, non-drive end: 6309 ZZ C3 Standard: IEC/EN 60034-1 Condition: used Location: Altenglan

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. Kjdpfxszk Ekgo Ahgsnb • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: good (used), Chain hoist ABUS GM 4 500.8-1 Used, manufactured in 2018, in very good condition, see pictures. The unit was used for approximately 1.5 years in a food processing company during a trial run! Load capacity: 500 kg Lifting height: 10 m / chain length Lifting speed: 2 – 8 m/min 0.90 kW With wireless remote control Kedpfjtuuxrjx Ahgenb 18 units available. Negotiable price: €1,500.00 net ex works No charger for the wireless remote control is included, and no documentation (inspection record, type plate) is available for the ABUS unit. Dismantling will take place from April to June 2024. Location: Northern Italy. Inspection possible by appointment. Further information available upon request. Partial sale possible. Systems will be professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Installation and programming can be carried out by partner companies. EVERYTHING MUST GO! - from the location, latest by the end of June 2024!! The following products from the system are also for sale: 300 x Dematic Multishuttle DMS 2 - 31.5 kg 350 m Dematic Sorter Flex Sort Crossbelt SC3 XB 3900 m container conveying system 600 m pallet conveying system 34 x Dematic vertical lift, 11 m height – 4 m/s 3 x pallet stacker 4 x palletizing systems, Schwingshandl 2 x pallet stations, Autopall, Schwingshandl 20 x pallet stations, Manpall, Schwingshandl 18 x pallet lifts 4 x Dematic pallet stations 14 x pallet wrapper, Unitech UNI WRAP 200A + 900 A 25 x container stacking system, Schwingshandl 35 kg 8 x labeling machines 20 x weighing stations 200 x system control cabinets Partial sale possible! (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex works.) Lenox Trading – Top used and new warehouse technology & heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 of its own employees, Lenox Trading is one of the largest dealers in new and used warehouse technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods are processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY CLEARANCE: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & DISPOSAL For dismantling and clearing projects, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of goods, equipment & complete inventories including thorough clearing. 2. Commission auction: Conducting auctions on behalf of clients.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 183 h, controller manufacturer: CYBELEC MODEVA BAC 2D Control, controller model: CYBELEC MODEVA BAC 2D Control, working width: 4,000 mm, bending force (max.): 290 t, control type: CNC control, Equipment: documentation/manual, Bending force: 290 t Working length: 4400 mm Distance between columns: 4050 mm Throat depth: 400 mm Opening: 515 mm Stroke length: 250 mm Table width: 220 mm Rapid approach speed: 0–150 mm/s Working speed: 0–10 mm/s Return speed: 0–120 mm/s Hydraulic pressure (max): 275 bar Motor power: 30 kW Weight: 52,000 kg Width: 1950 mm Height: 3400 mm Length: 5400 mm CYBELEC MODEVA BAC 2D Control – 4–7 Axis Controller Y1–Y2 axes independent hydraulic columns – symmetric valve technology G-Bendplus 4-axis controlled backgauge X-R-Z1-Z2 Kjdpfxoywfp Sj Ahgjnb Boschert Gizelis G‑BEND plus CNC table crowning Boschert Gizelis G‑BEND plus & G‑HD front supports Boschert Gizelis FIESSLER AKAS manual laser protection Boschert Gizelis G‑BEND plus ATM automatic thickness measurement Extra welded side frame Mechanical upper tool clamping Mechanical lower tool clamping Basic tooling

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 21-06-12-054, functionality: fully functional, operating hours: 385 h, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Available from April 1, 2027, for self-disassembly and self-collection. The machine features ProDrive control with a 3.5" color display and a separate keyboard. The height and swivel adjustment of the saw unit are motor-driven. The CNC-controlled parallel fence enables a cutting width of 1,300 mm. Equipment / technical data: • Machine height 910 mm • Control panel at eye level • ProDrive control with 3.5" color display • Main motor 5.5 kW (7.5 hp) VARIO • Stepless speed control, approx. 2,000–6,000 rpm • Saw unit that can be swiveled to one side, 0–46° Knodpfxez Ah E Rs Ahgsb • Extended cutting height for saw blade diameters up to 500 mm • AKE quick-change system for the main saw blade • 2-axis scoring unit • Motorized height and lateral adjustment of the scoring unit • Scoring unit motor 0.75 kW / 8,200 rpm • LED lighting in the area of the scoring unit • Table extension 840 mm • Double roller carriage 3,800 mm with floor support • On/off switch on the double roller carriage • Angle miter fence, length stop up to 3,500 mm • Two individual folding stops • Extendable cross slide extension, extendable to 650 mm • CNC parallel fence, cutting width 1,300 mm • Travel speed of the parallel fence 250 mm/s • Automatic dimension correction depending on the fence profile • Front support roller, 300 mm wide • DUPLEX 1350 mm double-sided miter fence • Template holder directly on the control panel • 99 storable cutting programs • Operating hour counter • USB interface • 400 V / 50 Hz Special equipment: 3,800-mm double roller carriage, CNC parallel fence 1,300 mm, 2-axis scoring unit, VARIO drive, and the DUPLEX miter fence. Inspection and test run possible by appointment.

Condition: used, functionality: fully functional, Heidelberg V 72-4 4 colors powder Alkohol, technotrans cylinders not damaged, 52*72cm 60 millio Knjdpfx Ahezxzphsgsb lotation: Hungary

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, loading space length: 4,200 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Sturdy and high-quality sales trailer as a high loader for snacks or goods. Our* snack bar trailers* from the *SELLERH* range are manufactured with an insulated sandwich body. The sturdy steel frame is welded and hot-dip galvanized for high stability. A lockable personal lock in steel and *not in plastic* is installed in the door. The box body is made of 25 mm polyester sandwich in white. The *car trailer* has four crank supports for jacking up the *snack van*. In other words, an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales hatch on the right* with lifting aids lockable from the inside, electrical distribution, stable *crank supports*, *sandwich body* 25mm outside in white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*. Kjdpfxopfb Nys Ahgenb

Condition: used, mileage: 699,000 km, power: 368 kW (500.34 HP), first registration: 08/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: automatic, emission class: euro6, loading space length: 6,342 mm, Year of construction: 2016, Equipment: air conditioning, Manufacturer Volvo Model FM500 8x4?4 Nopa Tipper Euro 6 Year 2016 Condition Good Serial Number YV2XT40G4GA788530 Ref. nr. 308170 Reg. date: Hk: 500 Km: 699000 Gearbox: I-shift Eurotype: 6 Diesel tank: 1 Tank liter: 330 l Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: Globetrotter Coffee machine: ? Leather seats: ? Kodpfxjzyd Upe Ahgenb Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 315/80 - 385/65 Cover% left 40 - 60 - 40 - 60% Front suspension: Air Suspension rear: Air Wheelbase: 3700 mm. Toolbox: ? Hydraulic system: ? Total weight: 32000 kg. Net weight: 13600 kg. Load capacity 18400 kg. Manufacturer: Nopa Wire hoist: ?