Used Bottero 352Bcs-R Evo for sale (67,405)

Condition: used, operating hours: 1,216 h, mileage: 8,947 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 5,350 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,150 kg, empty load weight: 4,200 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition as shown in photos * DULEVO 2000 * 4 x 4 all-wheel drive * Switchable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, up to 3,400 mm with third brush * High-pressure cleaner with hose and high-pressure lance at rear * Pre-spray system * Spraying width: 1,120 mm * Debris hopper: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high-tip emptying, tiltable up to 45° * Ideal for pedestrian, foot, and cycle paths, narrow alleys, etc. * 2-person full comfort cab * Air conditioning * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP * 40 km/h road approval * Heated tinted panoramic windshield * Comfort suspension seats * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find additional trucks on our homepage at Bledpfx Amsw Emh Ssyok We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods, so that the buyer does not have any misconception about the condition and suitability. Viewing and testing are possible at any time by prior arrangement and are expressly desired. All information provided without guarantee. We accept no liability for mistakes or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. Blsdpfx Amjwzv E Eeysk With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 800 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. Bedpfxsulauvj Amyjlk With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, Disassembled prototype filling/dispensing system – special system with V2A tanks For sale is a disassembled prototype filling/dispensing system from industrial use. This is a custom-made/special construction from Evonik/Daimler AG. The system was professionally disassembled, is in good condition, and is prepared for transport. Technical data / equipment * Manufacturer: Evonik / Daimler AG * System type: Prototype filling/dispensing system * Model: Special system / tank farm and filling system * Year of construction: 2010 Bodpfx Aozabgwjmyjlk * 2 tanks with 40 m³ each * 1 tank with 30 m³ * Tanks / system made of V2A * Pumps stored separately * Pump list can be provided upon request * Condition: disassembled, untested, prepared for transport Notes Due to the disassembled condition, the system is sold untested. An inspection is recommended. Technical testing, media compatibility, recommissioning, and transport organization are the responsibility of the buyer. Further information, existing documents, and the pump list can be provided upon request. Please contact us preferably by email. Telephone inquiries should only be made after prior appointment.

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW Blodpfxsy Uhxks Amyjk 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: new, Year of construction: 2026, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. Blsdpfx Asv Tyr Ismyek As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar Blodpfx Aof Eywwjmyek -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Bedpfef Epznjx Amyslk Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: like new (used), Year of construction: 2026, functionality: fully functional, working width: 1,300 mm, The SRS 1300 is an industrial finishing machine for sheet metal that integrates deburring, edge rounding, and surface finishing in a single pass, optimizing the process after laser or plasma cutting. ⚙️ Main technical features Working width: 1300 mm Configuration: 2 abrasive roller heads 4–8 rotating brushes Installed power: 39 – 88 kW Bledpfxsyz Tdls Amyjk Materials: steel, stainless steel, aluminum, brass Working thickness: approx. 0.5 – 50 mm 🚀 Performance Complete process in a single pass Removal of burrs, oxides, and slag Homogeneous edge rounding Line grain or non-directional surface finish Parts ready for painting, welding, or coating High repeatability and reduced manual work

Condition: used, Year of construction: 2018, operating hours: 234 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Condition: Ready for use and fully functional Technical condition: Good Description: Battery. Year of manufacture: 2023 Bedpswkk T Aofx Amyslk

Condition: used, Year of construction: 2018, operating hours: 47 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Bsdpewkk Tvsfx Amyelk Condition: Ready for use and fully functional Technical condition: Good

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Bljdpfx Aerklxvomysk Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Bedpfop Stgnsx Amyelk Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. Bledsqxalxjpfx Amyjk So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. Bsdpfsqxandex Amyolk To get more information about segmented bending machines we produce please contact our sales department.

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. Bodpfx Askhaadomyjlk To get more information about our machinery please contact our sales department

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps. Blsdpfx Amjlwt Adoyok

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Bledsh R I Iujpfx Amyjk Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Bsdpfx Amerqg U Doyolk

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. Blodpfx Aohz Twwemyok To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Blodpfx Amsq U N T Reyek Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm Blodpfxsf Epzco Amysk

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Bodpfx Aotp H Ersmyjlk Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 2005, machine/vehicle number: 423086, This Ferromatik Milacron Elektra 110 evolution injection molding machine will be auctioned off in our industrial auction / machinery auction (follow-up auction of Wirthwein Friedberg GmbH – machinery, packaging, and other materials) online. Bsdpfxezqyllj Amyslk You can find this and many other items on our platform.

Condition: refurbished (used), Manufacturer: Marel Model: RevoPortioner TRP600 Year: 2013 Condition: Refurbished Serial number: 10115385 Stock number: 3421 Risco vacuum filler Type: RS505CP 1.5 Serial number: C812038 Year of construction: 2013 Hopper: 350 liters Power: 3 x 400V, 50Hz, 8kW Dimensions: 2450 x 1350 x 2100 mm Weight: 1010 kg Includes accessories cart Marel Revoportioner Type: TRP600 Serial number: 10115385 Year of construction: 2013 Belt width: 600 mm Compressed air: 8 - 10 Bar, 150 Nm³/h Bjdpfszqfwaex Amyolk Power: 3 x 400V, 50Hz, 9kW Dimensions: 2150 x 1850 x 2050 mm Weight: 1400 kg Elpress drum washing machine Type: TRP700-4742453 Serial number: 10115725 Year of construction: 2013 Hot water: 3 Bar, 60°C, 35-100 L/min Cold water: 3 Bar, 10°C, 35-100 L/min Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16kW Dimensions: 1825 x 1150 x 1650 mm Weight: 550 kg Includes mold roller rack and drum lift