Used Bosecker Ev-2501-Z for sale (23,263)

Condition: new, Year of construction: 2025, ZGE60 - 60Lt Vibratory Sieving Machine * Changeable sieving system * 0.34 kW vibratory motor * Start/Stop thermal switch It is used to automatically separate abrasive/polishing stones and material from each other after the deburring and/or polishing process in vibratory machines that do not have a sieving system. Guedpew Hpfvofx Aa Esd

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Godpfx Aeykuhcja Ejud Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Godpsu Hiq Rofx Aa Eeud Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Year of construction: 1998, condition: reconditioned (used), coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Mark: eugen Model: Mayer 715 Godpokmgpvsfx Aa Eeud Description: beveller saw with drilling for Eugen Mayer coffins Year: 1998

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, Equipment: CE marking, documentation/manual, emergency stop, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Godpel Sm N Tsfx Aa Esud Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. Godjrkmv Sepfx Aa Eoud CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) Guodoh I N Udopfx Aa Ejd * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, documentation/manual, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) Guodswb Hhdepfx Aa Eed * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standarts) included * Main swicth and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 heating zones in the barrel + 2 heating zones in the die head, designed for universal use with a nitrided plasticizing system. - Plasticizing unit fi 25 mm, nitrided - Barrier screw with mixing tip (for hard PVC) - Output torque on screw 636 Nm - maximum screw speed 80 rpm Guedsxtf Hgspfx Aa Eed - Screw start interlock to prevent underheating - Barrel equipped with feed zone cooling (liquid cooled) - 3 barrel temperature control zones - Heating-cooling set (band heaters, cooling fan) - Lenze gearmotor with 5.5 kW motor - hopper - Stepless speed control via potentiometer and inverter - Temperature control with Omron controllers for full monitoring - Heater current measurement - heater burnout protection - PID heating tuning function - type J thermocouples - Die head with 2 heating zones, no cooling

Condition: ready for operation (used), Year of construction: 2002, number of axes: 4, This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. Gedjx D Dvnopfx Aa Eeud • Working area: 3000 x 1050 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: Gusdpfx Aaoh Agr He Ejd * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5011 & RAL 7036 *Epoxy paint is used to ensure long life of the paint

Condition: good (used), Year of construction: 1974, This mixer was designed for intensive mixing and wet granulation of materials such as powder / granulate. Working volume: 63 - 200 liters Total volume: 250 liters Cutter head: 4.9 / 6 kW, speed 1,500 / 3,000 min¹ Mixing tool: 18,5 kW, speed 2 speeds Manufacturer: Lödige Year of construction: 1974 Godpfjwa Tcfex Aa Ejud Floor Space: 200 x 110 x 145 cm

Condition: used, mileage: 788,000 km, power: 368 kW (500.34 HP), first registration: 05/2016, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, = Additional options and accessories = - Air horn - Disc brakes - Immobilizer - I shift - Lift Axle - Radio - Radio CD player - Sleeping cabin - Speed limiter - Sper - Steering Axle - Toolbox = Remarks = Volvo FH500, 2016, 788,000 km Globetrotter, I-Shift, Euro 6, 6x2 with Steering axle, Front axle leaf-sprung = More information = Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Steering; Suspension: air suspension GVW: 28.000 kg Guedpoyxgmnofx Aa Esd Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 2026, condition: new, The IMIZUNI OB-2R/4800 peeling machine is compatible with peeling machines from various manufacturers that use the dry peeling method for onions. The precision of its construction and its robust design made of stainless steel not only provide production advantages but also make the machine aesthetically pleasing and easy to clean, thus facilitating production while maintaining all hygiene standards. Peeling machine capacity: with two operators positioning the onions, the capacity is 100-120 onions per minute; with four operators, the capacity is 120-180 onions per minute. Guedpfeh Hbfujx Aa Esd We recommend purchasing the auger inspection table shown in the picture for use with the peeling machine.

Year of construction: 2026, condition: new, Hopper capacity: 40 [kg] Performance: Up to 140 [onions/min] Raw material size: 45 – 120 [mm] Overall width of the machine: 1700 [mm] Overall height of the machine: 2200 [mm] Overall length of the machine: 8500 [mm] Number of working lanes: 2 Onion loading height: 1000 [mm] Onion discharge height: 850 [mm] Waste discharge height: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 3 [kW] Gusdpfx Ajd Nh Suja Esd Compressed air connection: 8-10 [bar] Air consumption: 1.9 [m3/min] Noise level: Above 80 [dB] Material of construction: Stainless steel and food-grade plastics CE certificate: Yes Topping cutter: Yes

Condition: new, Year of construction: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Turning Center, with Sub-Spindle, Driven Tools, and True Y-Axis, 35° Slant Bed Max. Swing Diameter: 650 mm Max. Turning Diameter: 320 mm Gjdpfx Ajwwvldoa Esud Max. Turning Length: 550 mm Linear Roller Guides on All Axes Rapid Traverse X/Z/Y: 20/20/12 m/min Y-Axis Travel: 140 mm, +/- 70 mm Turret: 12 Stations BMT55 — 12 Driven Positions Max. Turret Speed: 4000 rpm, 3 kW Main Spindle: Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Spindle Drive Power, Direct Drive: 15/16 kW Max. Spindle Speed: 3500 rpm Sub-Spindle: Chuck Diameter: 152 mm Spindle Nose Standard: A2-5 Max. Bar Capacity: 46 mm Drive Power: 11 kW Max. Speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment: Parts Catcher (Preparation) Hinged Belt Chip Conveyor Oil Skimmer Coolant System 3-Color Warning Light Work Area Lighting Centralized Lubrication System Programmable Tailstock Set of Soft Jaws Tools and Toolbox CE Conformity Operating Manual The machine will be exhibited at EMO, Hall 12/D10 and will be available immediately afterwards. A wide range of automation options is available, such as bar loaders and loading robots.

Condition: new, Year of construction: 2026, Z-MaT U320 5-Axis Simultaneous Machining Center Control: ZMATROL 5-Axis Simultaneous, 15" LCD screen (optionally Siemens ONE, 15" LCD screen) (Siemens/Fanuc 4+1) Travel (X/Y/Z): 500/500/400 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 24,000 rpm, built-in Spindle taper: BT30 Spindle motor: 3.7/5.5 kW Air blast through spindle Spindle air curtain Spindle oil cooler Tool changer: 21-tool disc Max. tool length: 200 mm Max. tool diameter: 60/100 mm Table Table diameter: Ø 320 mm Max. workpiece diameter: 320 mm Max. table load: 80 kg T-slot (width x quantity x spacing): 14H8 x 8 x 45° Distance spindle center to table surface: 100–500 mm A-axis tilting travel: ±115° C-axis rotation: 360° Max. rapid traverse A/C-axes: 100/130 rpm A/C-axis encoders Standard accessories Work completion lamp, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic grease lubrication system 3-axis glass scales with air purge (XYZ) Automatic tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip wash) Full enclosure Transformer: 400V, 50Hz Electrical cabinet heat exchanger Automatic power-off Leveling bolts and blocks Toolbox CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 1800 x 3270 x 2510 mm Machine weight: approx. 4,300 kg Gjdpfx Asyv A Troa Esud Subject to errors and prior sale Extensive automation options available

Condition: new, Year of construction: 2026, Z-Mat TBX63S ZMATROL 15", 5-axis simultaneous (Siemens/Fanuc optional) Turning/milling center with B-axis ±120°, 12,000 rpm 6" sub-spindle, Y-axis travel 150 mm Max. swing diameter: 450 mm Max. turning diameter: 250 mm Max. turning length: 750 mm Linear roller guideways on all axes Main spindle Chuck diameter: 203 mm Spindle nose: A2-6 Max. bar diameter: 52 mm Spindle bore diameter: 66 mm Drive power, DDS: 18.5 kW Max. speed: 4,000 rpm Sub-spindle Chuck diameter: 152 mm Spindle nose: A2-5 Max. bar diameter: 46 mm Spindle bore diameter: 56 mm Drive power, DDS: 11 kW Max. speed: 5,000 rpm Milling spindle Spindle interface: HSK-T63 Max. speed: 12,000 rpm Drive power: 30 kW Max. torque: 95 Nm Axis travels X-axis travel, with Heidenhain glass scale: 790 mm Y-axis travel: -75 mm Z-axis travel: 750 mm W-axis travel: 1,000 mm B-axis swivel range: ±120° Rapid traverse X, Y, Z, W-axis: 24 m/min Tool magazine Double arm: 30 tools Max. diameter / length / weight: 78 mm / 250 mm / 8 kg Dimensions (W x D x H): 4.45 x 2.76 x 2.85 m Weight: 9.8 t Standard equipment Godsyv A Najpfx Aa Eeud 30 bar through-spindle coolant Ergonomic control panel with handwheel USB port, Ethernet, memory card Full enclosure Safety interlock door switch Coolant system Control cabinet air conditioning 3-color warning light Work area lighting Centralized lubrication Tools and toolbox CE conformity Operating manual A wide range of automation systems, such as bar feeders and loading robots, are available.

Condition: new, Year of construction: 2026, Feeding capacity: 40 [kg]. Capacity: up to 240 [bulbs/min]. Raw material size: 45 - 120 [mm]. Total width of the machine : 1700 [mm] Total height of machine : 2200 [mm] Total length of machine : 9500 [mm] Guedpfxsq Edcge Aa Ejd Number of working paths: 4 Loading height of onion: 1000 [mm] Height of onion pick-up: 850 [mm] Height of waste pick-up: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz]. Installed power: 3 [kW] Compressed air connection: 8-10 [bar]. Air consumption: 1.9 [m3/min]. Noise level: Above 80[dB] Construction material: Acid-resistant steel and plastics approved for food contact CE certificate: yes Cutter: Yes

Condition: new, Year of construction: 2026, Hopper capacity: 40 [kg] Performance: Up to 140 [onions/min] Raw material size: 45 – 140 [mm] Overall width of the machine: 1050 [mm] Overall height of the machine: 1880 [mm] Overall length of the machine: 4830 [mm] Number of working paths: 2 Onion loading height: 1000 [mm] Gujdpfx Aed Nimaoa Esd Onion discharge height: 700 [mm] Waste discharge height: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1.2 [kW] Compressed air connection: 8-10 [bar] Air consumption: 1.9 [m3/min] Noise level: Above 80 [dB] Material of the structure: Stainless steel and plastics approved for food contact CE certificate: Yes Topping cutter: No

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Gsdpfewxd Agox Aa Eeud Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: new, Fully automated roof tile profiling machines available in various sizes and designs. Our range includes over 60 roof tile patterns. Delivery time and machine configuration are determined individually for each order. Please contact us for further information and technical documentation. Gsdpfxsyu Sz Ij Aa Ejud

Condition: new, Year of construction: 2025, Z-MaT TN500-450 Siemens 828 D ShopTurn, 15" Touch 35° Slant Bed, CNC Turning Center, with Tailstock C-Axis, hydraulic brake with driven tools, Linear roller guides on all axes with linear robot and magazine Max. Swing Diameter: 550 mm Max. Turning Diameter: 360 mm Max. Turning Length: 450 mm Rapid Traverse X/Z: 20/20 m/min Turret: 12 stations, BMT45 of which 12 are driven Max. Turret Speed: 4000 rpm, 3 kW Spindle Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Drive Power, Direct Drive: 22/30 kW Max. Spindle Speed: 3,000 rpm Tailstock Diameter: 110 mm / MT 5 Tailstock Quill Stroke: 100-500 mm Dimensions (W x D x H): 2.8 x 1.7 x 1.9 m Guodpfewwv Tuox Aa Eod Weight: 4.8 t Standard Equipment Hinged belt chip conveyor Oil skimmer Coolant system Three-color warning light Work area lighting Central lubrication system Programmable tailstock Set of soft jaws Tools and toolbox CE compliance Operating manual Machine with linear loading robot Video shows the linear loading robot with another machine The machine will be exhibited at EMO Hall 12/D10, and is available for immediate delivery afterwards.

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC turning/milling center with tailstock, driven tools and true Y-axis, ±70 mm, 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 with live tooling Max. rotational speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options for 65, 75, and 91 mm) Spindle bore diameter: 66 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Tailstock diameter: 110 mm / MK3 Tailstock traverse: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Godeqa Dtfepfx Aa Ejud Weight: 5.5 t Standard accessories: Coolant system Three-color warning light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar loader interface Video shows DT500

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation Gsdpfx Ashfv D Sea Ejud washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions