Used Boot Wash Station for sale (6,050)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Hodjrr Smljpfx Ag Ienl Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Year of construction: 2012, condition: excellent (used), functionality: fully functional, horizontal glass wasching machine working width : 1300 mm glass thikness : 3 - 35 mm Hnjdpfx Agsyu N Urs Iol including motorized working height adjustment till 500 mm for maintenance min. glass size : 250 x 150 mm number of brushes : 4 number of air knives : 4 speed : 2 - 7 m /min machine sizes : L x H x H ca. 4742 x 2570 x 1320 mm

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm dimensions of the machine ca. 1,25 x 0,70 x 1,20 m SYSTEM CHEMIE - T 50 Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm Hnjdpfx Asym D Aheg Ijl - Draining Area Dimensions: 400 x 375 mm - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Year: 2005 Description: - Length of conveyor: 25 mtr Hodpfxswx Ii Re Ag Ionl - Delivery to the right

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Stock number: 0367 Hnjdjx R U Nuopfx Ag Ijl Pressing force: 1,600 tons Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Condition: used, filling amount 250 l basket dimensions 550 x 270 x 75 mm dimensions of the machine ca. 1,25 x 0,85 x 1,24 m BALTIC METALL - 6957 Dive Wash Unit Hnjdeymp R Djpfx Ag Iel - Immersion Tank Dimensions: 595 x 395 x 500 mm - Draining Area Dimensions: 470 x 350 mm - 2x Storage Rack Dimensions: 480 x 360 x 230 mm

Condition: used, Year of construction: 1999, Technical details: Hodoymc Txepfx Ag Ienl pass through height: 2000 mm tank capacity: 800 l cycle time: - sec Heating capacity: 45 kW electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 63 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.800 m *

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 07759, We offer this used Tonello Spray Booth 1M W, year of manufacture 2018. Machine type: Spray Booth 1M W Power supply: 3Pn+GND Voltage and frequency: 400 V - 50 Hz Compressed air pressure: 7 bar Hydraulic pressure: 3 bar Maximum tank pressure: bar Hjdpfx Aoyt I Sajg Ionl Weight: 700 kg Serial number: 07759 Year of manufacture: 2018 Basket volume: l Installed power: 5 kW Maximum peak current absorption: 16 A Maximum working current absorption: 10 A Power supply cable cross section: 6 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Hnjdjxwcwwepfx Ag Ijl Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 07758, We offer this Tonello 70 L1 ECOFREE 2 industrial washing machine in very good condition, year of manufacture 2018. Brand: Tonello Model: 70 L1 ECOFREE 2 Year of manufacture: 2018 Condition: very good Category ID: 2065 Type ID: 1018 Type: industrial washing machine If you have any questions or require further information, please do not hesitate to send us a message or call us. Hnedpfoyt Hcwex Ag Isl

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, Ultrasonic cleaning device Glogar Ultrasonic 600H Tank capacity max.: 58 litres Basket dimensions (usable): 400 x 255 x 220h mm Internal tank dimensions: 500 x 330 x 350h mm Outer dimensions of the unit: 670 x 580 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Ultrasonic power eff./max.: 900 / 3.600 Watt Heating power: 2.800 Watt Sweep: yes Pulse: yes Degas / Autodegas: yes Drain/diameter: 3/4 basket load: 25 kg Included in delivery is 1 stainless steel basket and 1 noise protection lid. Hnjdefk Tt Iepfx Ag Ijl Delivery ex works (FCA), AT-4490 St. Florian b. Linz Device is produced in Germany! OTHER DEVICE DIMENSIONS AND DESIGNS ON REQUEST.

Condition: used, Turning station RITTAL / E SYS-K System GmbH Hnjdpfjv Tdkbex Ag Ijl Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg As-new condition

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 Hedpsf Axn Aefx Ag Isnl - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Hodpfxed Dc Uno Ag Ienl EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Year of construction: 2008, condition: excellent (used), We offer a KRONEN GEWA 3800V PLUS vegetable washing machine (year 2008, 6.3 kW, 3×400 V) complete with a KRONEN GE 11 air blow-off unit (year 2008, 2.2 kW, 3×400 V, 50 Hz) a professional, continuous washing and dewatering solution for lettuce, vegetables, herbs and fruit. The GEWA 3800V PLUS is a universal washer for pre-washing, washing, disinfecting, mixing and rinsing both cut and whole products such as baby leaf, iceberg, vegetables, herbs and fruit. It uses KRONEN’s HELICAL washing system, where the product travels through the wash tank in a spiral water flow up to ten times the tank length. This ensures thorough yet gentle cleaning, optimal product distribution and significantly reduced water consumption compared to conventional flotation washers. Floating and sinking products are conveyed through the tank by the helical water flow. At the end of the tank, product and water overflow to the vibration outfeed, where the product is sprayed with fresh water and pre-dewatered, while the water is filtered and returned to the pump tank for reuse. A built-in sand trap separates heavy dirt such as sand and small stones at the bottom of the tank, preventing it from returning to the product flow. The machine is built entirely from AISI 304 stainless steel with excellent hygienic design and easy access for cleaning and maintenance. All pipes, pump casing, wash and pump tanks and covers are stainless steel; in the PLUS models with vibration outfeed there are no screws in the product area, which further improves hygiene. The set includes a KRONEN GE 11 air blower (2008, 2.2 kW, 3×400 V, 50 Hz), designed to blow off water from the product surface after washing. Placed after the washer, it improves dewatering, reduces the load on subsequent centrifuges/dryers and enhances shelf life and appearance of the final product. Technical specification KRONEN GEWA 3800V PLUS Manufacturer: KRONEN GmbH Hnjdpfeytthmex Ag Ijl Model: GEWA 3800V PLUS (with vibration outfeed) Year of manufacture: 2008 Max. capacity: up to 2,500 kg/h (depending on product and dwell time) Power: approx. 6.3 kW, 3-phase Voltage: 3×400 V, 50 Hz Tank volume: approx. 800 l (GEWA 3800 PLUS series) Material: AISI 304 stainless steel – pipes, pump casing, wash and pump tanks, covers Outfeed: vibration outfeed with fresh water spray and pre-dewatering Function: continuous pre-washing, washing, disinfection, mixing and rinsing of cut and whole lettuce, vegetables, herbs and fruit Washing system: HELICAL spiral washing system with adjustable water flow Features: Sand trap sedimentation unit for heavy particles Reduced water consumption through recirculation and filtration Compact, modular design – easy integration into processing lines Technical specification KRONEN GE 11 air blow-off Model: GE 11 air blower Year of manufacture: 2008 Function: air blow-off / dewatering after washing – removes surface water from product Power: 2.2 kW Voltage: 3×400 V, 50 Hz

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. Hjdpfxeytp U Ae Ag Ienl RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm Hedjrv Av Iepfx Ag Ionl -Weight: 569 kg / 258 kg

Condition: good (used), Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit Hsdpfxerrzfgs Ag Ionl -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Horizontal glass washing machine BAVELLONI HW 2200 Year of production: 2022 Maximum glass working width: 2200 mm 3 pairs of brushes (6 pcs.) Hnsdsytgi Dspfx Ag Iol As new condition ! Very little used ! Available immediately

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. STANDARD EQUIPMENT OF THE WASHER: * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system * Coarse mesh filter for insoluble contaminants (1mm mesh) * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V Hsdpfsxnlpdsx Ag Ijnl OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm Hnsdpfexm Ullsx Ag Ijl - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Year of construction: 1988, condition: good (used), 18 stations Hnjdpebh H T Iofx Ag Iol shaft Ø: 89 mm strip width: 600 mm strip thickness: 3 mm

Year of construction: 1968, condition: good (used), 15 stations shaft Ø: 120 mm strip width: 180 - 830 mm strip thickness: 10 mm Hjdpjbif Evefx Ag Ionl

Year of construction: 2005, condition: excellent (used), 16 stations design: cassette shaft Ø: 45 mm Hnodpfsh I Nizox Ag Ijl strip width: 300 mm strip thickness: 2 mm

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 2600/016GR.2 W-4667, Industrial washing machine Pero 2600 Hnedpfxjw Dhqlo Ag Iel No. 2600/016GR.2 W-4667 Year of manufacture: 1991 Temperature of the washing and rinsing belt: 65–80°C Simatic S5 control system