Used Besi Esec 3100 Plus for sale (6,191)

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Make: ANAYAK Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Control: Heidenhain 530 Table size: 4200 x 1100 Lodpey Uy Ecjfx Abzohl Travel: x: 4000, y: 1200, z: 1500 mm Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Pick-up location: Bremen The machine is in daily use, so operating hours will continue to increase. An inspection can be arranged at any time. Disassembly, loading, etc. are the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts." _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Lhedszqt Dnspfx Abzsl Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: good (used), Schlebach Mini Prof Plus ☑️Immediately available, no delivery time☑️ Universal machine for the production of double standing seam profiles 25 from sheet material, coils, or cut-to-size pieces in a single pass. The machine is equipped with: ✅ Profiling rollers for 25mm seam height ✅ 230V connection ✅ A manual slitting shear RS for cross-cutting ✅ A slitting knife LS for cutting to width ✅ An electromechanical counter (accurate to the cm) ✅ Bending capacity: 0.8mm (zinc, aluminum & copper), 0.7mm steel sheet Condition: • Good technical condition • Good optical condition • Weight: approx. 315kg An inspection and test run are possible by arrangement. The price is €14,250 net, plus VAT, totaling €16,957.50 gross. Lhsdpfx Abjzxrg Rszsl You will receive an invoice with VAT shown.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, tooling included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Ledpfxsz Dn Hue Abzohl Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Top tooling Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: good (used), functionality: fully functional, mileage: 26,994 km, Year of construction: 2016, operating hours: 1,684 h, Lower carriage / Undercarriage Manufacturer: Liebherr Type: MK 88 PLUS Year: 2016 Lsdoz Ar Euspfx Abzohl Kilometers: 26,994 km Upper carriage / Upper carriage Hours: 12,509 h Undercarriage hours: 1,684 h Load capacity: 8,000 kg Main boom: 30 m Max. boom length: 45 m / 2,050 kg Max. hook height: 59.10 m

Condition: good (used), Year of construction: 2005, Gebruikte 3-meter CNC-kantbank van Safan Model: H Brake 120 3100 Lhedezul Erjpfx Abzjl Bouwjaar: 2005 Capaciteit: 3100 x 120 ton CNC-besturing van de Y1, Y2, X, XDelta, R, Z1 en Z2 assen WILA nieuwe standaard gereedschapsklem Geüpgrade ESA grafische controller Lazersafe lasersysteem

Condition: good (used), functionality: fully functional, FOR SALE: Darley GS 3100 x 16 – Heavy-Duty Hydraulic Guillotine Shear Looking for a powerhouse for heavy plate shearing? Available is a high-quality hydraulic shear from the Dutch specialist Darley. This machine is built for demanding industrial environments and offers exceptional cutting capacity. TECHNICAL SPECIFICATIONS • Model: Darley GS 3100 x 16 • Year of Manufacture: 1989 • Max Cutting Length: 3100 mm • Max Plate Thickness: 16 mm (steel 450 N/mm²) • Cutting Angle: 2° • Motor Power: 22 kW • Machine Weight: Approx. 12,000 kg • Hydraulics: 400 L tank, 30 MPa max pressure Lhedpfx Abey Rvdajzol • Voltage: 380 V KEY BENEFITS • High Capacity: A 16 mm cutting thickness over 3 meters is a rare and highly sought-after feature. • Stability: The 12-ton mass ensures vibration-free and precise cutting even under heavy loads. • Reliability: Darley machines are famous for their over-engineered structures, making them extremely durable for long-term industrial use. An excellent choice for workshops handling heavy plates and requiring absolute operational reliability.

Condition: like new (used), Year of construction: 2009, grinding length: 1,300 mm, grinding width: 650 mm, workpiece weight (max.): 1,200 kg, grinding wheel diameter: 400 mm, table load: 1,200 kg, grinding wheel width: 100 mm, spindle speed (min.): 1,450 rpm, overall weight: 6,000 kg, grinding spindle motor power: 11 W, travel distance X-axis: 1,300 mm, travel distance Y-axis: 550 mm, rotational speed (max.): 1,450 rpm, Equipment: documentation/manual, DELTA MODEL MINI 12 SURFACE GRINDER MAXIMUM GRINDABLE SURFACE AREA 1300x650 ELECTROMAGNETIC CHUCK 1200x500 GRINDING WHEEL DIMENSIONS 400x50x127 AUTOMATIC DRESSING ON HEAD / TABLE TANK WITH PAPER FILTRATION MANUALS Lodpozy Ewrsfx Abzohl YEAR OF MANUFACTURE 2009

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. The machine has produced just 16 bales in total and is therefore practically as good as new. Ljdpfsyy Ddajx Abzohl Ideal for businesses seeking a high-quality baler without paying the price of a new machine.

Condition: ready for operation (used), Year of construction: 2019, overall weight: 9,000 kg, number of axes: 3, This 3-axis INANMAK MEKOR PL-YPe 3100 was manufactured in 2019. It features a working area of 3,000 × 12,000 mm and is equipped with a Hypertherm HPR400XD High Definition plasma source. The machine includes a 3D bevel cutting head and operates at a maximum positioning speed of 20 m/min. If you are looking to get high-quality plasma cutting capabilities, consider the INANMAK MEKOR PL-YPe 3100 machine we have for sale. Contact us for further details. • Plasma Source: Hypertherm HPR400XD High Definition, 400 A • Control System: Hypertherm Edge Connect CNC • Working Area: 3,000 × 12,000 mm • Cutting Head: 3D bevel cutting head • Maximum Positioning Speed: 20 m/min • Machine Voltage: 200 V / 50 Hz • Generator Voltage: 380 V / 60 A • Table Dimensions: 4,300 × 15,000 × 2,300 mm • Material Compatibility: Carbon steel, stainless steel, aluminum • Usage: Approximately 1 year Lhedpfjzcn I Hex Abzsl • Technical Condition: Excellent Additional equipment • Inanmak filtration and dust extraction unit included

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Lhsdpfsy D U Dfex Abzsl Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) Ledpfx Abezizr Rszjhl - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 2004, Built in 2004 Configuration: Left-hand delivery Equipped with: Left-hand delivery Mosca strapping unit Applications: Offset and gravure signatures Mechanical Infeed Speed: Maximum 1.0 m/s Cycle Time: Minimum 32 s/log Signature Sizes: Minimum: 200 × 110 mm (7 7/8" × 4 3/8") Maximum: 480 × 320 mm (18 7/8" × 12 5/8") Page Count: Depending on paper quality and basis weight Minimum: 4 pages Maximum: 144 pages Compressed Log Length: Standard machine: 800 to 1,200 mm (31 1/2" to 47 1/4") With special insert (optional): 500 to 860 mm (19 3/4" to 33 7/8") Strapping System: Mosca Strapping Material: 12 mm (15/32") wide PP or PET strap Endboard Hopper Capacity: Maximum 100 endboards with 10 mm (3/8") thickness Endboard Thickness: Minimum: 5 mm (3/16") Maximum: 13 mm (1/2") Endboard Insertion: Automatic Shingle Spacing: Minimum 30 mm (1 1/8") Shingle Side Variation: Maximum ±15 mm (5/8") Power Consumption: Approx. 4.5 kW (with manual crane) Approx. 4.0 kW (without manual crane) Air Consumption: 5 Nm³/h at 6 bar (3 cfm at 90 psi) Machine Weight: 4,100 kg (9,000 lb) Ledpszub Uvjfx Abzohl

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Ljdpfx Aboyq Nyyezehl Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 100 t, stroke length: 350 mm, working width: 3,100 mm, working range: 3,100 mm, Used good condition Trumpf Trubend 3100 Series 3000 3metre CNC pressbrake for sale Used Trumpf Trubend 3100 B26 with extended stroke and daylight for sale 3metre x 100ton 6 axis pressbrake for sale Brand/make: TRUMPF Model: TRUBEND 3100 b26 Type: CNC hydraulic Press Brakes Lodpfx Aev Hru Ujbzshl New 2016 Location: United kingdom Specification: Tonnage: 100ton Type: hydraulic downstroke H frame pressbrake Overall Length 3.1 m /3metre 6axis in total with a 4 axis back gauge Touch screen control Tonnage 1000Kn Stroke 350mm Brake time 46ms

Condition: refurbished (used), Year of construction: 2016, HANDTMANN VF-608 plus F,P.A. The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Lhedpfopy Edlsx Abzjl Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 235° Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Lhedpfozc Imijx Abzel Capacity R 45°: 115° Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Power: 1,5kW Length: 1930mm Width: 1610mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2010, pressure 160 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 400 mm ram stroke speed 200 mm/sec work speed 10.0 mm/min return speed 165 mm/sec work stroke ca. 350 mm dayligth ca. 660 mm oil volume 450 ltr. table height 830 / 950 mm table width 75.0 / 60.0 mm voltage 400 Volt total power requirement 18.5 kW weight 13440 kg range L-W-H 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ----- Lhsdpoxaambefx Abzsl ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----- - in checked condition - machine video - ?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Lhedpfx Ajywhhkjbzsl Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 2 x Packing lines, previously used for salad leaf, consists of; 1 x Multipond MP-14-7100-2500-J plus infeed + gantry 1 x Multipond MP-14-3800-1250-J plus infeed + gantry 1 x VH Centurion SI440 (VFFS) with printer + label applicator 1 x GIC4100 (VFFS) with printer + label applicator 2 x Loma checkweigher + metal detector combination 2 x packing tables Lhedpfxsz Arlhe Abzjl All machinery is fully working and ready to be decommissioned

Condition: used, Year of construction: 1982, Second-hand machine Condition: good Lhodpfx Abszk Nvtszol Features and technical specifications: Cutting length (mm): 3,100 Cutting height (mm): 45 Saw blade diameter (mm): 180 Depth to stop (mm): 500 Main motor: 1.8 kW Pneumatic clamp Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: at short notice

Condition: used, Hydraulic Shear SAGITA BEYELER Ljdezwcm Sjpfx Abzjhl Capacity: 3100 mm x Max thickness 4 mm Electric Back rear stop travel: 800 mm Voltage: 380 V Length: 4000 mm Width with part support: 3700 mm Width without part support: 2000 mm Total height: 1500 mm Weight: approx 5 T

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Pr4 100/3100 Make: Edwards Pearson Model: PR4 100/3100 MULTI- AXIS Year / new: 1996 Total axis: 6 – 4axis back gauge X R Z1 Z2 Lodpfjw Aw Svex Abzjhl Capacity / bed size / tonnage: 3metre x 3100mm x 100ton Cnc control: Cybelec DNC 80 Cnc control Max closing speed 200mm Can be viewed under power

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment Lhsdpoxab I Hsfx Abzel ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system Lsdpsziznfjfx Abzjhl - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.