Used Belt Grinding / Satin Finishing Machine for sale (70,285)

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm Laedpfx Aherpnf Ao Esc DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: refurbished (used), GENERAL CHARACTERISTICS Ø min / max to grinding 2/150 mm Maximum Infeed grinding length 355 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø610 x Ø304,8 x 355 mm Grinding wheel width 355 mm Regulating wheel width 177,5 mm Regulating wheel speed nº infinitas Min/max Regulating wheel speed (r.p.m.) 10/225 r.p.m. Control type ((CNC/Manual) CNC CNC Brand FANUC Regulating Wheel Dimensions (OD x ID x width) Ø350 x Ø203,2 x177,5 mm ELECTRICAL CHARACTERISTICS Coolant system motor power 0,70 Kw. Ljdpfx Ajd Nakvjh Eeac Motor power grinding wheelhead 37 Kw. Total Power 45 Kw. Voltage 220/380 Kw. DIMENSIONS AND WEIGHTS Weight 14.000 Kg

Condition: good (used), TECHNICAL INFORMATION: Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Lodpfx Aerpnf Roh Esac Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual plongeé Main engine power: 20 Kw Voltage: 380 V Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: 4315Kg approx. machine + 60 Kg drawer

Condition: good (used), Year of construction: 2007, Height of points 150 mm Distance between points 1000 mm Grinding wheel dimensions (h x id x w) Ø400xØ127x50mm Internal head 4 pcs Center height 150mm Max. workpiece weight 80Kg X-axis travel (transverse) 350mm X axis speed 10 meters per minute Z axis travel (longitudinal) 1000mm Z-axis speed 12 meters per minute Z-axis resolution 0.00004" B-axis turning range 210° B-axis resolution 0.00004 B-axis resolution 0.0001° B-axis resolution 0.0001 Drive capacity 10 HP Grinding wheel diameter 400mm Max. width Grinding wheel width 63mm Spindle Speed Range 0-1000 RPM Spindle turning range 0° - 90° Tailstock stroke 30mm Lajdpfx Ahjrakimo Eoc Tailstock stroke 30mm Equipped with Fanuc 21i-TB CNC Control Dimensions 3350x 2130x 2130 Weight 4535Kg Accessories: Steady rests, magnetic chuck, 3-jaw chuck, balancer, sensitron 6, coolant with paper and magnetic filter, fume extractor, etc.

Condition: good (used), Principal grinding wheel diameter 250mm Auxiliary grinding wheel diameter 200mm Diamonding unit Through feed grinding Paper filter maximum diameter : 50mm Laodpfegq Dk Eex Ah Esc

Condition: good (used), centerless grinding machine Lajdpfx Ahotrguve Eoc

Condition: refurbished (used), GENERAL CHARACTERISTICS Ø min / max to grinding 3 / 200 mm Maximum Infeed grinding length 500 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø 650 x Ø 304,8 x 500mm Grinding wheel width 500 mm Laedpfx Ajd I Um Rsh Esc Regulating wheel width 500 mm Regulating wheel speed nº Infinitas Min/max Regulating wheel speed (r.p.m.) 10 / 255 r.p.m. Dressing (Auto/Manual) Automático / Automatic Diamond dressing speed 255 r.p.m. Lubrication (Auto/Manual) Automático / Automatic Control type ((CNC/Manual) CNC CNC Brand FANUC CNC Model Oi - TF Infeed (auto/manual) Automático / Automatic Regulating Wheel Dimensions (OD x ID x width) Ø 350 x Ø 203,2 x 500mm ELECTRICAL CHARACTERISTICS Motor power grinding wheelhead 55 Kw Power hydraulic motor 3 Kw Total Power 60 Kw Voltage 220/380V DIMENSIONS AND WEIGHTS High 2.100 mm Long 2.300 mm Weight 15.000 Kg Width 2.800 mm OTHER FEATURES Accessories Included * Portarreglas de pasante, Polipasto de 1000Kg, Carenado, CE | Throughfeed work rest, block and tackle for 1.000kg, Machine casing, CE Year 1991 Serial Nº 765142

Year of construction: 2003, condition: refurbished (used), machine/vehicle number: 50/140/03, GENERAL CHARACTERISTICS Ø Grinding Wheel Dimensions (OD x ID x width) 508 mm Regulating wheel width 254 mm Diamond dressing speed Ø508 x 254 mm Lubrication (Auto/Manual) centralizado automático / automatic lubrication CNC Brand FANUC Laodpfx Ajd Nw T Ieh Esc CNC Model Series 18i - T CNC Axes Nº 8 Grinding wheel width 254 mm ELECTRICAL CHARACTERISTICS Total Power 25 kW Voltage 220/380 v DIMENSIONS AND WEIGHTS Long 2150 mm Width 2200 mm High 3400 mm Weight 8000 kg

Condition: used, Year of construction: 2017, functionality: fully functional, SCHIATTI FPS SME 8 – Year 2017 STRAIGHT GRINDING MACHINE, 8 Wheels Minimum workable size: 80 x 80 mm Thickness: 3–30 mm Speed: 0.5 – 5.5 m/min Power: 14 kW Variable angle: 0–45° Lodpfxezbrkio Ah Eoac 180,000 linear meters processed

Condition: used, Year of construction: 2007, functionality: fully functional, BATTELLINO FP5 – Year 2011 Straight Line Edging Machine Number of wheels: 5 Lasdpfozb Dzajx Ah Esc Min. glass thickness: 3 mm Max. glass thickness: 20 mm Min. glass dimensions: 80 x 80 mm Max. glass weight: 200 kg Speed: 0-4 m/min Machine dimensions: 5458 x 811 x 2087 h mm Worktable height: 830 mm Machine body: 2037 x 811 mm Input arm length: 1707 mm Output arm length: 1707 mm Weight: 1600 kg Power: 8.3 kW Water tank capacity: 200 lt Air pressure requirement: 6 bar Glass linearity: 0.1 mm per 2 meters of glass

Condition: used, Cylindrical Grinding Machine: Schaudt Model: RFH 500 Condition: used Centre height: 100 mm Centre distance: 500 mm Spindle speeds: 2225 / 2500 / 2825 rpm Grinding wheel diameter min./max.: 200 - 300 mm Weight, approx.: 1900 kg Equipment: Laedpfx Aoy R Dlfoh Ejc - Manual & automatic operation - Coolant system - Machine lamp - Emergency stop button - Machine leveling feet

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m Laedpst Hwu Aefx Ah Ejc

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Lodpst Hwuvsfx Ah Ejac Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm Ljdpfx Ahjt Hwnvj Ejac No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Laodst Hwniopfx Ah Esc Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm total power requirement 17 kW weight of the machine ca. 12 t Laedpfx Ahst Hxbdo Ejc dimensions of the machine ca. m

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Lasdpfxst Hw Txe Ah Ejc Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m Lasdpet Hw S Ujfx Ah Eec H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm Lajdpet Hxcnofx Ah Ejc workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1999, grinding diameter 360 mm grinding length 650 mm centre height 180 mm Ledpfot Hw A Hox Ah Eeac Control SIEMENS 840 D total power requirement 15 kW weight of the machine ca. 9500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel Ledjt Hw N Hopfx Ah Eeac workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Ledpfxet Hw U Ao Ah Ejac Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm Ljdpfx Aot H Smteh Esac thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Lasdpfx Asu Su Apoh Eoc Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _____ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Lajdpjvanrcofx Ah Eoc Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract