Used Automatic Face Drilling Machine For Drilling for sale (76,008)

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Iaedjvca Rcepfx Ag Iot Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2003, Tsguami BS18DE(S)-III CNC automatic lathe Good condition Ijdpfoq E Ra Ssx Ag Ioat Incoterms EXW CH-4528 Zuchwil The complete photo gallery and the technical data can be found in the attached catalog. No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Iodpfxsyk Hrge Ag Ieat Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Year of construction: 2013, condition: used, including 1 punching die / 2:1 round hole Machine cycle speed: 60 strokes per minute Operating modes: Punching die only: for standard jobs (regular paper) Punching die with separating device: for difficult jobs (with cardboard) Production speed: Depends on the size and condition of the paper to be punched, but is lower than the maximum cycle speed. Tool change mode: Manual mode with a duration of approx. 45 seconds Format change mode: Manual mode with a duration of less than 1 minute Maximum punching thickness: 0.7 mm (equivalent to approximately 7 sheets of 80 gsm). Iaodpfey Inzrex Ag Ijt Maximum diameter of punched holes: 8 mm Paper weight: from 80 to 250 gsm Minimum sheet size: 138 x 138 mm Maximum sheet size: 330 x 300 mm Connection rating: 220 – 240 V, 50/60 Hz Technical specifications according to manufacturer's information (without guarantee)

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Ijdpey Ih Tzefx Ag Ieat Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Iaodpfx Aow Naabsg Iet Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Iajdpfjy Ih Skjx Ag Iot Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. Iasdpfxoywtxbo Ag Iot It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: new, Year of construction: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Included accessories: - 20-piece set of packing plates - RTE 165 rotary table - SPW 12 58-piece clamping tool assortment - 4x SE55 leveling feet with vibration dampers - MK4/M16 ER32 3-20 mm collet chuck set Heavy, robust cast construction High smoothness due to ground gears running in an oil bath Forward and reverse operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Ijdjyxyivjpfx Ag Ioat Coolant system Machine lamp Gear head swivels ± 45° Massive dovetail guide of the column, hand-scraped, for maximum stability and precision Height-adjustable, large protective screen with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy-duty, large cross table, precisely machined surface with T-slots and adjustable gib strips Solid cast machine base with chip tray Single-speed quality industrial motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speed ranges SIEMENS SINAMICS V20 frequency inverter Dimensions and weights: Length approx. 1,600 mm Width/Depth approx. 930 mm Height approx. 2,110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45° Drilling-Milling Capacity: Maximum face mill size: 63 mm Maximum end mill size: 26 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal Milling Table: Length: 800 mm Width: 240 mm Distance vertical spindle to milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant System: Coolant pump(s) drive rating: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel Range: X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical Spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M16 Quill diameter: 75 mm Quill travel: 120 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Through-feed drilling machine Vitap Sigma 2TAS 4 vertical drilling units, each with two heads Isdpfx Agoy Idd Nj Ijat 2 frontal side spindles Spindle pitch: 32 mm Maximum workpiece length: 2500 mm, minimum: 240 mm Drilling depth up to 70 mm Pneumatic material clamps Year of manufacture: 2006 CE mark Machine weight: 1600 kg Dimensions: 390x180x145 cm (H)

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation Iasdpfxjy Idlas Ag Iet

Condition: used, Year of construction: 2001, Abrasive belt length, 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt design 1st unit: Cross belt sanding shoe 1st unit: Electronic segmented shoe Abrasive belt width, 1st unit: 150 x 4800 mm Drive, 1st unit: kW 2nd unit: Longitudinal roller design 2nd unit: Steel calibrating roller Abrasive belt length, 2nd unit: 2150 mm Abrasive belt width, 2nd unit: 1350 mm Abrasive belt speed, 2nd unit: 18 m/sec 3rd unit: Shoe unit design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding shoe, 3rd unit: Electronic individual segments, 32 mm width Abrasive belt length, 3rd unit: 2150 mm Abrasive belt width, 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed, fixed: stepless 5-15 m/min Control: Touchscreen control Electr./pneum. belt oscillation: electric Infeed height: variable (lower table runs) Iedpfexzi S Nox Ag Ioat Table stroke: electro-motor Digital table display Working height or feed table height: 880 mm Location: Nattheim

Condition: used, MULTI-SPINDLE DRILLING MACHINE Felder 921 21 spindles, left/right rotation of spindles, quick-release spindle holders, spindle spacing 32mm, drilling vertically or horizontally, 2 pneumatic clamps, power supply 380V, Iodpfsy N Syhjx Ag Isat The machine is fully functional and ready for operation.

Condition: ready for operation (used), Year of construction: 1984, Brand: Biesse Model: Forecon 51 Machine no: 401/83 Year model: 1984 Tech data: 1 horizontal drilling unit with 21 spindles 2 swivel drill units with 15 drill chucks each Center distance between spindles: 32mm Horizontal unit motor: 2Hk 2 vertical motors: 2Hk Spindles: 2800rpm Air pressure: 6-7 atm Air consumption per cycle: 17 l Total engine power: 5.5Kw Comes with fence, see picture. Machine size: 1500x3140x1500mm Weight: approx. 590 kg Isderiutkepfx Ag Isat Stock no: 2001355

Condition: ready for operation (used), Drilling machine Brand: Ayen Model: DB 1000 B23 Machine no.: 681642 Iaedpfx Ajx Aplxsg Iot Pneumatically controlled drilling machine. The drill box can be replaced with other drills. Machine size: 120x80x205 cm (LxWxH) Weight: 275 kg Stock no.: 2001012 Technical data 23 spindles cc 32 mm Max opening: 820 mm Working width: 720 mm Drilling depth: Horizontal 120 mm, vertical 80 mm Mitre 90º-45º Motor: 2.2 kW, 50 Hz, 380 V, 2800 RPM, 3-phase

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Year of manufacture: 1976 Iasdpfx Agsu Nwzce Iet Motor: 7.5 kW, 50 Hz, 380V, 3-phase Stock number: 10316

Condition: good (used), Automatic drill, drill, plate drill, row drill Iaodpoddfhxefx Ag Ist -Automatic drill: for advertising signs -Spindle mount: 12 mm (can be changed according to customer requirements) -Automatic drilling -Table size: 1200 x 1000 mm -Spindle stroke: 200 mm -Speed: 2800 rpm -Feed: via gear -pneumatic workpiece clamping -Pneumatic workpiece ejection -Dimensions: 1360/1520/H2180 mm -Weight: 450 kg

Condition: excellent (used), functionality: fully functional, Blum's dimensions head pneumatic pressure of material pneumatic movement of head linears with blocks linears length 1,75m table with rolls 50cm motor power 1,5kW drilling depth regulation pedal control Ijdpfx Asy N Rgaeg Ijat year 2009

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm Iasdpfxeyant Rs Ag Iet – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,893 mm, total height: 1,585 mm, total width: 1,240 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, Pratika 56 MPE X2 The Minipack Pratika MPE X2 is a proven, fully automatic machine for manufacturing shrink film packaging. This machine is highly versatile and user-friendly, making it suitable for a wide range of products in both food and non-food sectors. • Fully automatic L-sealer with brushless motors and modern PLC control with a 7” color display • Simple operation • Storage of up to 128 recipes including product images • Quick product changeovers • Up to 3,600 units per hour • Convenient and fast product changeovers • Max. product dimensions: 600 x 400 x 240 mm • Machine dimensions: 2,480 x 1,240 x 1,675 mm Iaodpfx Aox Tp H Teg Ijt • No compressed air required! • Doors on both sides of the machine • Machine interior equipped with lighting

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g Iajdpjy H Rfqefx Ag Ist HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7035.46 € 135.78 € 25 mm MK 3 280 mm 125 - 4000 (2 Stufen) U/min 0,9 / 1,45 kW M20 520 mm 820 mm 1900 mm 275 kg 125 mm 110 mm 240 - 790 mm 420 x 340 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Emergency stop pushbutton Undervoltage release Isdpfsy H N A Iex Ag Ieat electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS (PRICES ON REQUEST): Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 8144.6 € 157.19 € 25 mm MK 3 280 mm 125 - 4000 (2 Stufen) U/min 0,9 / 1,45 kW M20 520 mm 820 mm 1900 mm 275 kg 125 mm 110 mm 240 - 790 mm 420 x 340 mm 125 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Iajdpfsy H N Aujx Ag Ist Digital drilling depth and speed display Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS: Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm Iedpfxowwl I Is Ag Ijat workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg Iedpfxeuhhzhj Ag Ieat dimensions of the machine ca. 0,75 x 0,6 x 1,15 m