Used Atc Sk50Xmk4 for sale (687)

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FAN XF 480 NGD Roll-off Tipper PHT 20 Palfinger Options: - CRYSTAL WHITE - Sleeper Cab - Aero Baseplate - Maintenance-free mechanical 4-point cab suspension with integrated shock absorbers - Light-transmitting sun visor - LED headlights, cornering lights and fog lights mounted on the bumper - LED headlights - LED daytime running lights - Windshield made of two-layer laminated glass with sun protection film - Double-glazed windows in the rear wall of the cab - Tempered, single-layer safety glass - Main mirror and wide-angle mirror - DAF Corner View - Leather-covered steering wheel Bjdpfx Asz Hr Iuomroln - Interior trim color: Luxury - Dashboard design: Vision - Cab, interior trim: Hexagon - Air-suspended driver's seat - Super Air - Adjustable armrests on both sides of the driver's seat - The driver's seat is attached to the cab floor - Foldable co-driver seat with table function - Extendable dashboard table on the upper center console - Open storage compartment on the center console - Refrigerator and drawer below the lower sleeping berth - Xtra Comfort spring core mattress, thickness 150 mm - Protective net on the lower sleeping berth - Curtains along the windshield and side windows - LED interior lighting for the cab - Automatic temperature control (ATC) - 6 kW water-air auxiliary heating with waste heat pump and timer - Roller blind on the driver's side - Roller blind on the co-driver's side - Roof hatch with electric operation - Electric windows - Additional accessory power supply 2 x 24 V / 40 A - ECAS remote control with illuminated buttons - PACCAR Connect subscription - DAF infotainment system including DAF Truck Navigation - Luxury speaker system - Predictive Cruise Control - Driver Performance Assistant (DPA) - Speed limiter recognition - DAF Drowsiness Detection and Distraction Detection - Lane change warning system - Electronic Stability Control (ESC) - Acoustic reversing warning system - Hill start assist - Front axle type 163N - Driven rear axle - Tag axle load 8.0 t - Axle load monitoring - Axle load limiter 11.5 t - Parabolic suspension at the front - Lifting mechanism for the steered tag rear axle - Tire supplier Goodyear - Tire pressure monitoring - Steel disc wheels, silver-grey - Tire size 315/70R22.5 - Engine MX-13, 6-cylinder diesel engine with multi-stage torque, 12.9 liters. Power: 355 kW - 483 hp at 1600 rpm - Emission class Euro 6 - ECO mode - Idle shutdown, after 5 minutes of idling - Automated transmission, TraXon, 12 gears - Automated direct-drive transmission TraXon 12TX2620, gear ratio 16.69-1.00, 12 gears - Traction assistance 15.0 t - Software for automated transmissions - Rear axle ratio 2.69 - Driven rear axle with mechanical differential lock - MX Engine Brake - Pneumatic control for parking brake - Spring brake cylinder 1, front axle - Parking brake assist - Wheelbase 4.80 m / rear overhang 2.70 m - Longitudinal member height 310 mm, thickness 7.0 mm. Internal reinforcement front and rear - 620-liter aluminum fuel tank on the left side, height 620 mm - Drawbar crossmember with ringfeder trailer coupling - Pneumatic connection for trailer with swivel couplings - Electrical connection for trailer, 24 V with 15-pole socket - ECAS control - LED side marker lights - Rear engine PTO, mounted on the MX-13 engine in the 13 o'clock position, with direct pump connection - Generator 130 A, batteries 2 x 210 Ah AGM - Battery power

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Bodpfx Ajzlxnhjmreln Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: new, Year of construction: 2025, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, 🚀 EMO Show Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately Available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – giving you the unique opportunity to secure this model directly from the show at a special price! 🔧 Technical Highlights: ✅ Travel range: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4000 kg ✅ Precision: Positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool & mold making, automotive, and aerospace industries. Further specifications attached and below: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (L×W) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × pitch × qty.) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor power X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool positions 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Bedpfx Ajw N I A Domrjln Power consumption 60 kVA Machine dimensions (L×W×H) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main Features 1 FANUC 0i-MF plus absolute, type 0 system, 15-inch color LCD 2 iHMI + manual I 3 Max.1500, min.400 block look-ahead 4 Data server (2GB) 5 Fast Ethernet card 6 Straightness compensation interpolation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting 11 3-color signal beacon 12 Portable MPG 13 Automatic power-off 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level monitoring 17 Direct-drive spindle HSK A63, 15000 rpm 18 Spindle oil chiller 19 Air blow for machining 20 Coolant system 21 Spindle air seal 22 Air gun / water gun 23 Grease lubrication system 24 Pneumatic system 25 Full enclosure 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Separated cabinet for high & low voltage 29 Hinged chip conveyor 30 Adjustable leveling pads & foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools 39 FAGOR absolute linear scales on X, Y, and Z axes 40 Encapsulated iron package 👉 Get more info & secure the special price: New CNC Gantry Milling Machine Skymaster VM2000 – Kraft Werkzeugmaschinen

Condition: excellent (used), Year of construction: 2008, turning length: 1,609 mm, spindle bore: 110 mm, travel distance X-axis: 335 mm, travel distance Z-axis: 1,609 mm, spindle motor power: 26,000 W, rotational speed (max.): 2,100 rpm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,100 mm, CNC Lathe with c-axis VIPER - VT-33LMBC MACH-ID 9473 Make: VIPER Type: VT-33LMBC Control: Fanuc 21iTB Year: 2008 Tooling holders included Live driven Axiaal tools included  Live driven Radial tools included Chip conveyor Tool eye arm Motorized Tailstock 3 chuck 400 mm with extra2008 jaws Max. turning Ø: 780mm X-Axis: 335mm Z-Axis: 1609mm Spindle bore: 110mm Speedrange: 2100Rpm Spindle power: 26kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:4.5kW Chip conveyor: yes Tool eye: yes Pinole taper: 5Mk Stroke pinole: 110mm Quill Ø: 100mm Length: 3800mm Width: 2100mm Bodpoyw Ii Uefx Amrsln Height: 2100mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 510 x 510mm, Table 1200 x 450mm, Spindle speed 8,000rpm, Spindle taper BT40, Spindle Motor 11kW, Fanuc Oi-MC Control, 24 Station ATC, Coolant, Low Volt light, swarf conveyor Bodpfoy Tka Usx Amroln

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, total height: 2,674 mm, table width: 600 mm, table length: 1,350 mm, table load: 1,000 kg, overall weight: 6,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,740 mm, number of axes: 3, This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details. • CNC control: MSC-504 • Distance spindle nose to table: 150–660 mm Bjdpezc Nfaefx Amroln • Tool magazine: 30 tools, side-mount ATC Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table load: 300 kg, overall weight: 11,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details. • A: -120° / +30° • C: 360°Table • Dimensions: 500 × 400 mm • Number of tables/pallets: 2 • Spindle nose to horizontal table: 190–650 mm • Spindle nose to vertical table: 140–600 mmSpindle • Max torque: 252 NmTool magazine / ATC • Automatic tool changer: YesControl and software functions • Automatic pecking cycle with load detection • Synchronized tapping • EIA Dynamic Compensation 2 • Two additional M-code functions • G00 slope constant • High-speed function • MAZACC-3D high-speed software package • Shape compensation for rotary axes Bedpfx Amezpygajroln Additional equipment • Pallet changer (two pallets/tables) • Belt-type chip conveyor • Chip conveyor preparation with chip pan • High-pressure coolant through spindle system (stated as 15 kg)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM Blsdpfezwhtkjx Amrjn MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123 Control Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 1,850 mm Bsdpfxszv A Akj Amreln Y: 2,100 mm Z: 1,250 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 1,700 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Torque: 288 / 187 Nm Tool holder: SK50 according to DIN 69871 Tool Changer 60-fold chain magazine Double gripper Equipment IKZ 40 bar Chip conveyor Tool measurement system Blum Laser NT Hybrid Heidenhain TS 640 infrared probe Electronic handwheel Minimum quantity lubrication (MQL) Oil/emulsion mist separator Coolant through spindle Coolant tank 980 l Rotating viewing window 3D quickSET Machine Protection Control (MPC) Adaptive Feed Control (AFC) ATC (Application Tuning Cycle) DMG MORI NetService DMG MORI SMARTkey Documentation and electrical schematic (German) Travel X-axis: 1850 - mm Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Haas Mill, New 2018, Table 12 x 36", 10 Station ATC, BT 40, 6000RPM Spindle, USB, Coolant. Bljdpfxozvrf Us Amron

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Bedpfjzd Dfijx Amrsln Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, Bsdpszd Eqaefx Amroln table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2003, operating hours: 23,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller model: OSP-E100M, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time by the end of week 26 of 2026! TECHNICAL DETAILS Travel in X-axis: 1,000 mm Travel in Y-axis: 950 mm Travel in Z-axis: 1,000 mm Main spindle speed: 12,000 rpm Table width: 630 mm Table height: 630 mm Bodpfxjzbamfe Amroln NCB B-axis: 0.001 degrees MACHINE DETAILS Control system: OSP-E100M Dimensions (L x W x H): 6,500 x 3,460 x 3,280 mm Operating hours: approx. 23,000 h EQUIPMENT 2 APC pallet changing systems 100 ATC tool changer SK50 with tool ID Coolant system Mayfran Consept Renishaw preparation (receiver) Tool breakage monitoring installed in the magazine (special development) An optional tool package with 230 tools is available for the machine for €5,000. The seller can offer dismantling, transport securing, removal and loading for an additional charge of €7,850.

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling Bsdpjzb Ufvefx Amreln ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: ready for operation (used), Year of construction: 2003, number of axes: 3, This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details. • Working area: approx. 4' × 8' (1220 × 2440 mm) Bledpfx Amszug Etjrsn • Table: Vacuum nesting table • Spindle: HSK electrospindle, 7.5–9 kW • Tool changer: Linear or side-mounted ATC • Drilling block: Vertical drills (standard) • Controller: SCM Xilog

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, Controller MITSUBISHI MELDAS M70 Table size 910 x 400 mm Max. table load 960 kg X travel 760 mm Y travel 445 mm Z travel 520 mm Spindle speed 12000 rpm Tool holder type MAS BT40 Spindle power 22 kW ATC Magazin 22-fold Weight 4400 kg Dimensions LxWxH = 2200 x 2200 x 2700 mm Features, accessories - 2 axis nc round table - Coolant unit Blodpfx Ajzxzwrjmron - Chip conveyor - Manuals

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN MM 6 Traveling Column Milling Machine The LAGUN MM 6 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-part production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing possible ✔ High flexibility thanks to the traveling column concept ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of milling machines. The machines are convincing due to their reliability, ease of maintenance, and economical operation. Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN TFT displays 24" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Tool changer: Automatic tool changer (ATC), 60-position Chip removal: Hinged belt conveyor Enclosure: Blodpfx Amshy Au Isrsn Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: new, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, table load: 10,000 kg, position of the milling head: Vertikal, workpiece weight (max.): 10,000 kg, torque: 1,392 Nm, overall weight: 30,000 kg, spindle nose: SK 50 - DIN 69871/A, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, The STARVISION DX 3220 impresses with its robust portal design, powerful drives, and high-quality components. It offers high precision, rigidity, and reliable machining – even for demanding machining tasks. Ideally suited for mold making, machine construction, and contract manufacturing. Your advantages: ✔ Installation and commissioning in Germany included ✔ Service and spare parts directly from JMT ✔ Financing and leasing options available ✔ 24 months warranty Technical equipment: Control: HEIDENHAIN TNC 7 CNC path control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (ICS) 70 bar Tool changer (ATC): 60-position chain magazine with dual gripper Chip conveyor systems: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Rotary table: Preparation for 4th axis (rotary table) Bledpfxjhy Avps Amren Enclosure: Full enclosure, closed at the top (including roof) Accuracy: Positioning accuracy: ± 0.035 mm Repeatability: ± 0.028 mm Contact us – we will be happy to advise you and prepare a customized offer.

Year of construction: 2007, condition: ready for operation (used), Horizontal Machining Centre with Boring Spindle Starrag Heckert 1 Type: HEC 1600 Athletic Pallet size: 1250 x 1600 mm Pallet load: max. 8.000 kg Number of pallets: 25 pcs Fastems Table indexing: B-Axis 0.001° Table cross travel (X): 2.800 mm Spindle vertical travel (Y): 2.200 mm Column longitudinal travel (Z): 2.100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40.000 mm/min. Rapid X/Y/Z: 40 m/min. Rotaty table 8 rpm Max rotary diameter 3.000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37KW Spindle speed: 20 – 2.500 rpm Boring spindle diameter: 150 mm ATC: 80 pots CNC controller Siemens Sinumerik 840D Bodpfx Aeguk I Ismrsln Hours Spindle 21.400 hours Accessories Hexagon radio measuring probe Coolant unit with vacuum rotation filtration system High pressure coolant through spindle Electrical clear view window Visiport. Laser tool breakage control in working area. Cylinder path interpolation Tool and process monitoring ARTIS. Machines without Fastems = without pallet changers. - Pallet changer unit can be supplied by Starrag Heckert. Build year 2007 (Siehe auch weitere Angebote des Inserenten)

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Bljdpfsgulkisx Amron Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC 70 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Condition: new, Year of construction: 2026, HIGH RANGE TECHNOLOGY AT THE LOWEST PRICE IN THE MATKETPLACE, DON'T MISS THE CHANCE. CUSTOMER SATISFACTION IS OUR MAIN TARGET CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. GENERAL TECHNICAL SPECIFICATIONS Plant type: Mobile concrete plant with Bunker Feeding and Horizontal shaft mixer Plant Capacity : 100m³ / hour compressed fresh concrete Mixer Capacity : 2000 Liter (2m³ Compressed Concrete) Mixer Type : Double or Single Shaft Mixer Total Motor Power : 110 kw Standard Value. It may vary depending on the equipment. Voltage / frequency : 380V / 50Hz Standard Value Electronical equipment : Siemens Other equipment & accessories : Italy / Germany Automatic lubrication system (ILC : ITALIAN) ALL IN ONE (with software package), printer, uninterruptible power supply and SCADA software package, all control and monitoring processes, all kinds of reporting, failure notifications, etc. This process is done on the computer screen and with animation support. FOR MORE INFORMATION PLEASE CONTACT US NOW Whatsapp / Viber Bledpfx Amjgxmursren

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, Bledpfx Astmtktomron B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Bledpfjdz Edqex Amron Suction hood diameter 2x150 mm Made in China Weight 3500 kg

Condition: new, functionality: fully functional, Year of construction: 2026, 1 mobile concrete batching plant (brand new) Producer: Stetter Type: M C 1 TZ capacity: 56 cbm/h Mixer: Stetter pan mixer 1,0m3 Storage bins / compartment batcher: 4 aggregate inters per 10 cbm (Total 40 cbm) Silos: Optional 2 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport “free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Bodpfx Ask S Rcdsmrsln Inspection of the selling object and of reference "tublomix" plants by appointment possible! Warranty: 12 month Price and more infos on request offer and all price are net and ex stock, mistakes and/or false representations reserve, subject to prior sale

Condition: new, functionality: fully functional, Year of construction: 2025, 1 semi mobile concrete batching plant Producer: Stetter Type: M3 ILS capacity: 120 cbm/h working hours: 0,0 Mixer: Stetter twin shaft mixer – Stetter DW 3,0 Mixer cleaning system optional Storage bins / inline silo: 6 bins = 2 x 30 m³ + 4 x 15 m³ (total 120 m³) Silos: Optional 2-6 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: Bodpfx Amsk S Rh Hjrjln - Transport “free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference EASYBATCH plants by appointment possible! Warranty: 12 month Price and more infos on request offer and all price are net and ex stock, mistakes and/or false representations reserve, subject to prior sale