Used Almig Variable 11 Kw Screwcompressor for sale (44,964)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Giedev Hr Nxjpfx Afuew

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Gedot Rv Txspfx Afuoiw Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Without switch box

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 368.7 kW (501.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,380 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,430 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 411.8 kW (559.89 HP), Aircooled chiller/Heat pump TRANE RTMA105 368.7 kW / 411.8 kW Cooling capacity: 368.7 kW / 104.84 tons (12/7 — 35°C) Heating capacity: 411.8 kW / 117.09 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. 4-pipe system (Hot/chilled simultaneous water production). Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH01-90-340Y (screw) Type of refrigerant: R134а Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.43x2.25x2.4 m. Weight: 6380 kg Working hours: 4138/1893 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Godpjxp Iz Eofx Afuoiw Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Fröling Turbomatic TMC – Automatic Wood Chip Boiler (35–110 kW) Multiple Fröling Turbomatic TMC units in stock – immediately available. Output (kW) – Price (net, excl. VAT) 35 kW – €5,000 55 kW – €6,000 70 kW – €7,000 85 kW – €8,000 110 kW – €10,000 The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings, and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feed auger (dosing screw), which automatically transports the fuel directly into the combustion chamber. The complete discharge system (fuel extraction from the storage room) is generally not included and is available separately. 👉 For the 110 kW model, the complete discharge system is already included in the price. ⸻ Technical highlights: • Lambda-controlled combustion for optimal efficiency and low emissions • Automatic grate with shaking and tilting function for clean combustion • Multi-pass heat exchanger with automatic cleaning (WOS system) • Automatic ash removal from combustion chamber and heat exchanger • Induced draft fan for maximum operational safety • Large combustion chamber with refractory lining for high temperatures and stable combustion ⸻ Further advantages: • Modular system – easy installation • Individual drives for all components → high reliability • Adaptable to various fuels and moisture levels ⸻ TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic to industrial scale. 🏭 Brands in our range: Giodpfx Aowakktofujw Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Latest offers: Much of our current stock can be found on our website: topheatingsystems.com We also have additional equipment that is not yet advertised. 📅 Viewing: Warehouse visits are possible by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Year of construction: 2024, condition: new, Sell ​​a new WLO -15 KW, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 12.00 kW maximum heat output: 15.00 kW / approx. 150 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 1460 m3/h Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% Gjdpfjixul Hsx Afujiw CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 250mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1400 rpm Air flow: 1460 m3 / h Safety: CE mark + protective net

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Gsdpfeh Izh Iox Afuoiw Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3D BOCI Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000 mm Repeatability: ±0.03/1000 mm Acceleration: 0.8g (m/s²) Rotational speed: 60 rpm Max. positioning speed: 60 m/min Max. weight of a tube: 1500 kg 1. Raycus 6000W laser source 2. BEVEL laser head 3. Welded frame DPL 4. Schneider electrical components 5. Helical rack KH 6. Techmech reducer 7. Yaskawa servomotor 8. SHAC guides 9. Integrated power control 10. FScut 5000 software Godpfx Aji Apfzofusiw 11. Integrated electrical cabinet 12. HANLI water chiller 13. Cantilever gantry axis-X FHBS 14. Automatic waste collection 15. Crawler-type automatic workpiece collection 16. Automatic support system 17. Loading frame 12000 mm 18. Unloading frame 12000 mm

Condition: new, Year of construction: 2024, power: 20 kW (27.19 HP), We convert your machine from CO2 laser to fiber laser Godpfx Asnkaqljfusiw

Condition: new, Year of construction: 2024, We convert laser cutting machines from CO2 to fiber laser Gjdpjnkal Dsfx Afuoiw

Condition: used, Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /  TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging Baujahr / Year 2018 - Serial-No. 9501442110402 Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning Motorleistung 11 kW / Motor power 11 kW Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls Ausführung SelfClean / SelfClean Version Ausstattung / Equipment: Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity Display gesteuerte Filterabreinigung / Display-controlled filter cleaning Ventilatorsteuerung / Fan Control Bogenschalldämpfer für Luftaustritt nach oben / Elbow Silencer for Upward Air Discharge Rauche und Stäube werden mit einer Filterleistung von über 99 % sicher abgeschieden / Smoke and dust are safely separated with a filtration efficiency of over 99% Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Gsdpfxezav Ebs Afujiw On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Godpfxszkmi Dj Afujiw Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Gedpfx Afozkmfxousiw

Condition: used, mileage: 103,000 km, power: 100 kW (135.96 HP), first registration: 06/2021, fuel type: diesel, overall weight: 2,800 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system Audio 10 (DAB, Bluetooth), Audio system Audio 10 (radio with CD player), increased permissible total weight to 3.05 t, exterior mirrors electrically adjustable and heated, both sides, DAB tuner (digital radio reception), automatic activation of headlights, driving assistance system: active parking assist, ambient lighting in passenger/cargo area, steering wheel with multifunction buttons incl. trip computer, seats in the driver's cab: passenger seat as a double seat, seats in the driver's cab: driver's seat comfort, lining in the cargo/passenger compartment: plywood, fleece battery 92 Ah, heat-insulating glass, two-way speakers in the front Giodpfx Afszllmwjuow Additional equipment: 3rd brake light, adaptive brake light, airbag on passenger side, airbag on driver side, exterior mirrors, aspherical, both sides, exterior temperature display, fastening rails for roof rack, BlueEfficiency package, start/stop system, floor covering: passenger compartment TPO, braking system with ABS+ASR, ceiling light in the cargo area, design and equipment line Base, driving assistance system: breakdown management, windshield with antenna, generator 185 A, cup holders in the rear, cup holders in the front, seatbelt pretensioners, grab handle on passenger side, lockable glove compartment, body/superstructure: extra long, body/superstructure: standard van, communication module (LTE) for digital services, fuel tank: main tank 57 L, cargo area partition, load securing/lashing eyes, Mercedes-Benz emergency call system, model refinement, engine 1.7 L - 100 kW CDI CAT, rear fog light, wheelbase 3430 mm, low emission according to emission standard Euro 6d-TEMP, sliding door cargo/passenger area, right, safety belt system with warning system (driver/passenger side), safety belt system with warning system (driver side), safety belt system with warning system (passenger side), seat cover/upholstery: fabric, trim on window pillars, lining in the cargo/passenger compartment: hard fiber, half height, lashing rails in the cargo area - side wall to roof frame, service interval display Assyst Subject to prior sale, errors and changes.

Condition: good (used), Year of construction: 2004, operating hours: 35,000 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: refrigerant dryer, Almig screw compressor flex 15 Drive (year of manufacture 2004) – including MDX 3600 air dryer (year of manufacture 2011) – well-maintained, inspected, and ready for use. For sale is an Almig screw compressor flex 15 Drive (year of manufacture 2004, 15 kW power) in well-maintained, technically flawless condition – including a matching MDX 3600 air dryer (year of manufacture 2011). The compressor has been regularly maintained and is in very good condition both visually and technically. It is fully functional, inspected, and ready for immediate use. The included MDX 3600 air dryer reliably provides dry, clean compressed air, thus protecting your downstream equipment and tools. Gjdpezlgmfsfx Afuoiw With our comprehensive all-inclusive package, we can personally take care of the complete service for you – from delivery to commissioning of your new compressor. This includes unloading, installing, and aligning the system. Subsequently, our experienced service technicians will professionally commission the system, perform all necessary functional tests, and ensure that your Almig flex 15 Drive, together with the MDX 3600 air dryer, runs reliably and efficiently. In addition, we offer individual training sessions for your employees so that you can optimally utilize the system from the very beginning. We will also be happy to continue to support you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machinery. We place great emphasis on personal support and are always happy to assist you even after the purchase. You also have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come to our location and see for yourself the condition and functionality. With us, you are in the best hands – professionally, reliably, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: excellent (used), For sale is a Rietschle CL 25 VE vacuum pump from the renowned German manufacturer, Rietschle. This unit is designed for creating a vacuum in machines, production lines, and vacuum gripper and table systems. The pump is equipped with an oil tank with a level indicator and an electric drive. Its robust construction guarantees a long service life and reliable operation. The visual condition matches the photos – it shows normal signs of use. Technical data: Manufacturer: Rietschle Model: CL 25 VE Serial number: 325202 Country of origin: West Germany Capacity: 25 m³/h Rotational speed: 1400 rpm Maximum vacuum: ≥ 90% Gsdezi Hf Aspfx Afusiw Motor power: 1.1 kW (1.5 hp) Power supply: 380/220 V Frequency: 50 Hz Protection class: IP44 Insulation class: B Applications The pump is used in various applications, including: CNC machines, woodworking machines, packaging equipment, vacuum tables, vacuum grippers, vacuum conveying systems, laboratory equipment, production lines. Advantages: robust construction, German-made, high capacity of 25 m³/h, durable, oil-lubricated rotary vane pump, oil level indicator for easy operation monitoring, easy installation and connection.

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, Gsdpfx Afjzi Hc Ieuoiw resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: excellent (used), For sale: a Gebr. Becker DVT 40 vacuum pump from the reputable German manufacturer, Becker. This unit is designed for industrial applications, including CNC machines, woodworking machines, packaging machines, vacuum gripper systems, and other installations requiring vacuum generation. The pump is complete with an electric motor and is ready for connection. The visual condition matches the photos – normal signs of wear and tear consistent with its use. It is being sold as a used unit. Technical data: Manufacturer: Gebr. Becker, Wuppertal Model: DVT 40 Year of manufacture: 1978 Serial number: K685509 Capacity: 40 m³/h Maximum vacuum: 0.5 bar Motor power: 1.5 kW Rotational speed: 1420 rpm Power supply: 220/380 V Frequency: 50 Hz Protection class: IP44 Insulation class: B Power factor (cos φ): 0.8 Applications: CNC machines Machining centers Godpfx Afozi Ha Hjueiw Woodworking machines Vacuum packaging machines Vacuum transport systems Vacuum grippers and tables Industrial automation

Condition: excellent (used), For sale is a Rietschle CLFT 81 DV vacuum-pressure pump from a renowned German manufacturer. This is a dry-running rotary vane pump designed for simultaneously generating vacuum and compressed air. It finds application in packaging machines, printing machines, woodworking machines, CNC machines, pneumatic conveying systems, and many other industrial installations. The unit is equipped with a three-phase motor with a power of 3.0 kW and is mounted on a robust, compact frame. Technical data: Manufacturer: Rietschle Model: CLFT 81 DV (13) Year of manufacture: 1991 Country of manufacture: Germany Type: vacuum-pressure pump (dry-running, rotary vane) Capacity: 80 m³/h (50 Hz) Maximum overpressure: 0.5 bar Motor power: 3.0 kW Rotational speed: 1450 rpm Power supply: 3×380 V Continuous operation: S1 Serial number: 1375434 Application: packaging machines, CNC machine tools, woodworking industry, printing industry, pneumatic conveying, equipment requiring vacuum or compressed air. Godpsziw Rpofx Afusiw Condition: Used. Visual condition as shown in the photos. Robust construction, ready for further operation.

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of units 15kW -from below: Gedpszin Sdefx Afuoiw 2 rubber rollers, slip rollers conveyor belt 2 rubber rollers, slip rollers grinding thickness potentiometer belt blowing system pneumatic belt oscillation controlled by photoelectric sensors electric table lifting + manual (for precise adjustment) 2 feed speed types 0.3kW with pneumatic brake working pressure 6-8bar diameter of dust extraction nozzle 2x140mm overall dimensions L/W/H 1840x1650x2000mm weight 1160kg – unpainted – made in Italy – automatic shoe – 2 units – grinding thickness potentiometer – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11640 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 110 mm, total width: 40 mm, load capacity: 3,000 kg, Nedcon Traverse PR2 – approx. 270 cm | inspected & used The Nedcon Traverse PR2, with a length of approximately 270 cm, comes from our inspected used inventory and is immediately available from stock. It is ideal for expanding existing Nedcon pallet racking and heavy-duty shelving systems. Thanks to its robust design and high load-bearing capacity, the traverse can be reliably used in daily warehouse operations. We can also offer suitable frames upon request. Data: Length: 270 cm Height: 11 cm Width: 4 cm Racking system: Nedcon Type: PR2 Load capacity: up to 3000 kg Product number: CC1104015 Used item, available from stock, immediately deliverable -- MULTIPLE UNITS AVAILABLE IMMEDIATELY -- Price: Negotiable You will receive an invoice with VAT shown. Giodpfxszk Dkle Afuow HAVE YOU NOT FOUND WHAT YOU ARE LOOKING FOR YET? Visit our website, where you will find a quick overview of many offers and variations of the articles! Transport: Delivery can be arranged by our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements… We will be happy to help you realize your projects, from planning to ordering to assembly. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us via message or phone. You will find our telephone number on our company website. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm Giedpfxoy Ayiqe Afuow - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Gedpfoxz Al Nex Afueiw Power: 0.81 kW

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 3, load capacity: 13,500 kg, pallet spaces: 117 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 4,500 kg, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Each with 4 bays, 2.7 m wide, Gsdpfx Afezkb Hdsueiw Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump Gijdpfjm Rk Tpsx Afujw -Manufacturer: SKF Vogel, OIL- central lubrication pump from Uldrian TSM 22-8 rotary transfer machine -Type: MKU11-KW2-0005 428 -Content: approx. 1.8 l -Flow rate: 0.1 l/min / 16 bar -Dimensions: 220/130/H230 mm -Weight: 3.6 kg

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm Godpohfufgsfx Afueiw -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg