Used Aligner for sale (724)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders Ledpoy Tvphofx Af Sort * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: good (used), Year of construction: 1990, functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Manufacturer: Orma Machine Italy Year of manufacture: 1990 Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Length = 3700 mm Height = 2310 mm Features: Lodpev Iv Sgefx Af Sort Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven.

Condition: good (used), Stock number: 2920 Size: 800 x 500 mm panel thickness: 25 mm Total panel height: 110 mm Condition: good Lredpfx Aovcn U Nof Sjt Weight: 85 kg

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Lrodjzv Ttgepfx Af Set Year of built 2013 6 station base Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: used, Year of construction: 2007, machine/vehicle number: MBI18, Used Kosme Monocombi 2T Hot Melt Case Packing MonoblockThis second hand Kosme casepacking monoblock is designed for reliable bottle grouping and carton closing within a compact industrial packaging footprint. Built to support demanding beverage production environments and other bottling applications, it handles bottle collation into 6-bottle cartons and applies hot melt closure in a single integrated unit. Its monoblock architecture reduces footprint, simplifies integration on a used bottling line, and streamlines operation and maintenance.Manufactured by Kosme, a recognized brand in bottling and packaging machinery, this model features an additional bottle centering device tailored for Authentique bottle handling, improving infeed stability and pack quality. Suited to both PET and glass bottles, it aligns well with beverage production requirements where consistent case presentation, secure hot melt sealing, and repeatable format results are essential. With a practical power rating of 8 kW and manuals available, the machine supports efficient commissioning and routine upkeep for continued performance in industrial packaging operations.Technical Specifications & Performance DataManufacturer: KosmeModel: Monocombi 2TYear of manufacture: 2007Speed: 6.000 BPH ( bottle per hour) Machine category: Casepacking MonoblockPack format: 6-bottle cartonsClosure system: Hot meltPower: 8 kWContainer handling: PET and Glass bottlesIncluded device: Additional bottle centering for Authentique bottleDocumentation: Operating and maintenance manuals availableAdvanced Automation & Control SystemsThe monoblock layout integrates bottle collation, case loading, and hot melt closing for streamlined automation. Operator-friendly controls support quick setup and routine adjustments. The hot melt gluing system ensures consistent sealing quality with minimal operator intervention, improving uptime and minimizing rework in continuous production.Production Line Integration CapabilitiesEngineered for straightforward integration into a used bottling line or as a standalone casepacking station, the machine interfaces with upstream conveyors and downstream palletizing solutions. Its compact monoblock footprint helps optimize floor space while maintaining access for changeovers and maintenance. The 6-bottle carton configuration fits common beverage logistics standards and can be combined with typical secondary packaging flows in beverage production.Machine Condition & Maintenance HistoryOffered as second hand industrial packaging equipment, this machine comes with operating and maintenance manuals, facilitating proper setup and care. The presence of manuals supports efficient maintenance routines and helps sustain long-term reliability on the production floor.Operational Performance & VersatilityDesigned to handle both PET and glass bottles, the machine is suitable for beverage plants looking for dependable case formation and hot melt sealing. The additional centering device for Authentique bottle e... Lredpfx Afexywb As Sot

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 70 mm, cutting width (max.): 1,200 mm, saw blade diameter: 125 mm, rotational speed (max.): 3,800 rpm, total length: 6,000 mm, total height: 1,300 mm, overall weight: 3,500 kg, year of last overhaul: 2024, cutting length (max.): 4,200 mm, collet bore: 75 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, main saw diameter: 350 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, space requirement length: 6,500 mm, space requirement width: 3,000 mm, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable. Lrodjuyvniepfx Af Sst

Condition: excellent (used), Year of construction: 2023, Offer for Technofold 1100 SL with Gyro Specification: Machine speed: 350 m/min Step speed: 20 m/min Packaging width: 160-1100 mm Machine dimensions: 22 × 1.88 × 1.5 m Machine weight: 9.2 t Max power consumption: 26 kW Air demand: 6 bar / max 10 m³/h Machine equipment: 4-6 point machine Gyro – rotating packages by 90° Side alignment section – left/right Pre-breaking section Lsdpfx Ajw Ec D Aof Sort Automatic bottom section Servomotors, 4/6-point rear folding system Lower circular gluer left/right KQ cold glue system with 4 guns Final pressing and closing section Delivery section Ironing section with independent drive Pneumatic insertion rollers with SQUARING 2 alignment Tapping block – SPANKER Vacuum on the feeder + vibrator Camera with monitor on display

Condition: ready for operation (used), Year of construction: 2017, operating hours: 17 h, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 Ledpfx Afeyap Uis Sert • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, VOLUMEC Electric Tapping Machine Model: JT3750M EVO2 – Made in Italy Configured as follows: Balanced 3-arm jointed system made from special aluminum Adjustable angle head for tapping threads in any position Lodpfx Aoyia Txsf Ssrt Includes alignment magnet Brushless technology electric motor, 220 V Simple speed adjustment via potentiometer Quick-change holder, size 3 Table mounting column Technical documentation CE-compliant version Technical data: Tapping capacity in steel: M8 – M36 Speed: 10 – 150 rpm Max. working radius: 1,900 mm Holder: Size 3 Weight: 25 kg Including the following special accessories: VOLUMEC automatic lubrication system VOLUMEC touchscreen control VASTC Subject to errors and prior sale!

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: Ledpfexranpsx Af Sort LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of cooling: water, Equipment: cabin, For sale is a ready-to-use, compact, plug-and-play welding cell: OTC Easy Arc MIG/MAG 3.03. This system combines precise robotic technology with a high-performance, high-end welding power source and a fully automatically controlled horizontal rotary positioner. It is ideally suited for the automated, cost-effective production of small and medium-sized series. The entire cell is mounted on a stable base frame with a welding table/perforated plate and can be easily integrated into your production process. Technical highlights & components: Robot FD-B6: Highly dynamic 6-axis articulated arm robot, optimized for arc welding with internal cable routing (6 kg payload). Controller FD11: Modern robot controller for precise path guidance, including an ergonomic teach pendant for quick programming. Welding power source Welbee Inverter P400: Pulse welding power source (400 A) for spatter-free welding of steel, stainless steel, and aluminum, even at high welding speeds. Easy Arc PB250 Positioner / Horizontal Rotary Table: Fully controlled additional axis (up to 250 kg payload) for precise workpiece rotation, which enables welding in the optimal weld pool position, even with complex components. Safety concept: Complete enclosure including welding protection viewing windows and CE-compliant safety technology for direct use in a workshop. Condition & scope of supply: The system is in very good, fully functional, and ready-to-use condition, as it has been used only rarely. Scope of supply: Complete welding cell as described, including welding torch equipment, cable package, and documentation. The system is available immediately and can be inspected under power after consultation. Technical data at a glance: Manufacturer: OTC DAIHEN Europe GmbH Model: Easy Arc MIG/MAG V03.03 Year of manufacture: 2024 Power connection: 400 V / 50 Hz B2B sale with exclusion of all warranties. Subject to prior sale. Net price plus VAT ex Philippsburg. Loading can be arranged on-site. Components: Robot welding cell as shown OTC welding robot Easy Arc MIG/MAG 1.03, robot FD B6 Easy Arc PB250 (Move) programmable positioner for automatic component alignment Controller FD11 Lodpfxozvqunj Af Sort Welding machine Welbee P400 Additional equipment: Water cooling If you have any questions or require further information, please send us a message or call us. An inspection and demonstration are possible at any time.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Staircase milling machine. For sale due to new 5-axis CNC machine. Milling length mm 4,750 Milling width mm 900 Clearance height mm 150 Table length mm 6,000 Head rotatable by ° 70 Grooving head tiltable by ° 90 Number of heads 1 Main motor kW 4 Design: Stationary machine Adjustment: Program control Laser alignment: Single laser CE marking: Yes Weight approx. kg 2,250 Availability: Short notice, from current location Fully functional For sale due to new 5-axis CNC machine. Additional pictures can be provided. Training will be provided upon pick-up (easy to learn). Milling staircase stringers: possible to process one staircase in 1 hour. Long stringers, up to 470 cm, can be milled without any problems. 4 pressure bars included. Adjust rise, adjust step thickness, adjust slope (takes about 1 minute in total) and you are ready to go. The machine automatically moves from one step to the next. Still in excellent condition and suitable for use as an emergency milling machine. Lrsdsiwa Rkspfx Af Set

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Lredpozlcdgjfx Af Sjt Folding "A" warning plate for waste transport Rear night parking sign

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate. Ljdpfezlciiex Af Sort

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 410 kg, This is a used and tested tilt-turn positioner KUKA DKP 400.1 manufactured in 2007. The system is designed as an external supplementary axis for industrial robots and is typically used in welding, assembly, and machining applications. With a payload capacity of 400 kg and two axes (rotation and tilting), the positioner allows for optimal workpiece alignment and significantly enhances accessibility for the robot. Integration is carried out directly through the robot controller. Lsdpey Nfm Ujfx Af Ssrt

Condition: excellent (used), Sorting, feeding and capping machine Cap application and screwing station without filling station Fully automatic filling and capping system by feeding a filling unit with filling needle Cap sorter and capper for lids and caps up to Ø 20 mm Mode of operation When the machine is started, the caps and lids aligned in the sorter are fed under the capping and screwing heads using a feed system. Cappers include screw cappers for screw caps and lid pushers for stoppers and caps 3 x spiral feed bowls for bottles, stoppers and caps 1 x capping station 1 x cap placement station Container height 55 mm Container diameter 20 mm Cap diameter 20 mm Ledpfxjqazcgj Af Sort Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Lrodpfjwrcd Nex Af Sst Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Planer part (planing function) Working width: approx. 500–520 mm Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm Ledpfxsyw Ivhs Af Sort SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901011222, empty load weight: 5,741 kg, maximum load weight: 33,259 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,345 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 60 %, color: red, Gross/technical aggregate load: 24000 / 27000 kg Stated kingpin load perm./techn.: 11000 / 12000 kg Overall length approx.: 13850 mm Overall width max.: 2550 mm Overall height approx.: 3345 mm Platform length approx.: 13650 mm Platform width approx.: 2480 mm Fifth-wheel height approx.: 950 mm Ljdpszv Sq Refx Af Sort Kingpin setting dimension approx.: 1680 mm Front corner dimension approx.: 2040 mm #Chassis - semi-trailer for haulage Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock-Profil" for lashing strap attachment (note: side boards must be opened to hook in the straps) "patentiertes Load-Lock-Cross" for lashing strap attachment, in the cross member beneath the outer frame 24 t 2-speed landing legs, single-side operation, straight foot, without shock absorber (rear swivel clearance approx. 1930 mm) Pull-out ladder at the rear 2 wheel chocks with holder Side underrun protection, aluminium Pallet box for 8 Euro pallets Front underrun protection, galvanised steel Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle 2 plastic tool boxes Container locks, 4 pairs recessed in the floor for 2 x 20 ft containers, distance between locks approx. 600 mm total, retractable type, without adapter, extendable to locking dimensions of 2760 mm and 2820 mm 2 rows of lashing/stake rails along the longitudinal beams, recessed centrally in the floor 7 lashing/stake rails transverse, recessed in the floor across the full width to the outer frame #Axles & Suspension SAF disc brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Air suspension #Braking System Two-line air braking system, colour-coded pipework for easy servicing Spring-actuated parking brake 2 mismatch-proof coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Electrics 24V multi-chamber lights, yellow LED side marker lights 2 x 7-pin mismatch-proof sockets at the front 2 additional LED work lamps 2 pairs of warning boards, double LED-illuminated, extendable to 3000 mm #Floor Phenolic-faced plywood flooring approx. 30 mm thick, on longitudinal sub-beams for high point load capacity, forklift axle load up to max. 7100 kg #Headboard / Front Corner Posts Hangler steel headboard approx. 2600 mm high, additionally lined inside with phenolic-faced plywood over the full height #Paintwork Frame hot-dip galvanised incl. passivation + outer frame top-coated in RAL 3000 fire red, 15-year warranty against corrosion perforation #Note The images are archive photos; the vehicle may currently be in use

Condition: used, Year of construction: 1994, machine/vehicle number: GA24, Used ROBINO & GALANDRINO Wirehooder record 10-2Technical Specifications & Performance DataThis Automatic Wirehooder is a compact, high-performance wirehood applicator designed for sparkling wine and premium beverage closures. Built for reliable operation on glass bottles, it delivers precise wirehood positioning and twisting for consistent, secure muselet application at industrial speeds.Machine type: Automatic Wirehooder (wirehood/muselet applicator)Model: Record 10/2Year of manufacture: 1994Refurbishment: Overhauled in 2017Production speed: 10,000 bphContainer material: Glass bottlesInfeed direction: ClockwiseWirehood magazine: High-capacity, long-autonomy designSupported wirehood styles: Collio, Collio light, Collina, Lia, Sile, Extra L, Valdobbiadene, Elegance, Artù, Piave, Monterossa, Cru, Magnum CollioAdvanced Automation & Control SystemsEngineered for stable, repeatable operation, this wirehooder features automated feeding and consistent torque application to protect cork integrity while ensuring firm cage tightening. The long-autonomy magazine reduces manual replenishment for improved uptime on a used bottling line or integrated second hand packaging cell. Operator-friendly controls support quick setup and process monitoring for efficient beverage production.Automated wirehood feeding with alignment and controlled twist applicationHigh-capacity magazine to extend runtime between reloadsOperator controls for speed and format parametersStandard safety interlocks and emergency stop circuitsProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of a corking machine on glass bottling lines. It can function as a standalone module or as part of a synchronized industrial packaging line with upstream and downstream conveyors, accumulation, and inspection systems.Inline or standalone operation with conveyor interfacesDesigned for glass bottle handling in sparkling applicationsFormat changeover kits support various wirehood styles listed aboveSuitable for integration into complete bottling and beverage production linesMachine Condition & Maintenance HistoryThe unit was manufactured in 1994 and underwent a refurbishment in 2017, providing renewed reliability of key components and alignment systems. It is presented in good working order and ready for operation, ideal for facilities seeking robust second hand bottling equipment with proven performance.Operational Performance & VersatilityOptimized for sparkling closures, the machine handles a broad range of wirehood designs without compromising on application quality. Its high-speed performance supports commercial throughputs, while the magazine capacity helps maintain continuous operation and minimize changeover interruptions.Consistent cage placement and twist control for secure closureWide compatibility with premium wirehood styles for different brand aestheti... Lrjdozmpzuepfx Af Set

Condition: used, machine/vehicle number: WFDFLT21802036327, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 70 %, color: grey, Swap-Body Trailer Please note: the images shown are archive photos. #Chassis - Swap-Body Centre-Axle Trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body) - 1 pair of geared landing legs front, with straight foot and single-side operation on the RHS (direction of travel) - 1 pair of geared landing legs rear, with straight foot and single-side operation on the RHS (direction of travel) - 2 wheel chocks with holder - Aluminium side impact protection - Steel rear underrun protection - Full-width rear mudflaps (not in combination with forklift pockets) - Half-shell mudguards - Mudflaps #Coupling Gear - Centre-Axle Trailer - Drawbar with certified 50 mm tow eye, haulage-specification version - Low-mounted drawbar coupling, 2200 mm - Coupling height: 380 mm #Axles and Suspension - SAF disc brake axles - Axles/chassis laser-aligned - reduces tyre wear and fuel consumption - Air suspension #Braking System - 2-line air braking system - Colour-coded pipework for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, with connecting lines to the towing vehicle, connection on the RHS - 24-volt EBS electronic braking system with EBS connector at the front, with connecting cable, connection on the RHS - Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS! - With lift-and-lower valve, hold function in both lowered and raised positions #Wheels and Tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED marker lights at the sides - 2 white front position lights - 2 white/red rear tail lights Ljdpfszu Iv Hsx Af Sert - 2 x 7-pin anti-mismatch connectors at the front, with connecting cable, connection on the RHS - LED work lights on both sides (switched via reversing light) - 2 additional LED work lights at the rear, switched via reversing light - 1 LED work light at the front, centred between the beams, facing rearward, switched via reversing light #Country of Registration / Plates - Germany - With Dekra inspection and certificate (in accordance with §13 EC-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape to ECE R 048, white at the sides and red at the rear #Paintwork - Frame: DB 7350 Nova Grey - 10-year warranty against corrosion perforation

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Lsdpfjzuyxgsx Af Sert Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch Lsdpfx Afoywhamo Sort -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: M319, Used SIG filling monoblock 6000 BPH - year 2012Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments for fresh milk. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE-marked packaging machineryAdvanced Automation & Control SystemsThe monoblock is configured for automated operation with centralized machine controls, ensuring stable production at 6000 bottles per hour. Electrical architecture is standardized for 380 V, 50 Hz, three-phase networks, supporting safe integration into existing bottling equipment. CE conformity underpins safety circuits and compliant machine wiring, while the integrated design simplifies synchronization between the filler and capper to minimize downtimes during format changes.Production Line Integration CapabilitiesThis unit is well-suited for integration within a used bottling line or as a standalone monoblock in beverage production. Its adjustable working range supports bottle formats from 0.5L to 1.0L, with compatibility for PET and glass bottles, making it adaptable for diverse industrial packaging requirements. Conveyors and upstream/downstream modules can be synchronized to line speed, supporting efficient infeed and discharge configurations.Machine Condition & Maintenance HistoryThe machine is second hand with 10000+ operating hours and configured for ready-for-operation deployment, subject to standard installation and commissioning procedures. Its CE-marked construction and preserved utility specifications indicate a well-documented industrial asset suitable for continued service within beverage production environments.Operational Performance & VersatilityCombining filling and capping on one frame, the monoblock eliminates inter-machine transfer points and reduces footprint. The 6000 bph throughput is ideal for medium-scale operations, contract packaging, and line expansions. Flexibility across PET and glass bottles within 0.5L to 1.0L allows rapid response to product mix changes in bottling equipment portfolios. The integrated capping system ensures precise torque application aligned to the selected closure format when appropriately tooled.Installation Requirements & Site PreparationThe machine requires a 380 V, 50 Hz, three-phase electrical supply... Ljdpfx Ajymdqfef Sert

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS Lrjdpfxjzufl Ss Af Sjt 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation