Used Wp 500 Multisaw for sale (16,369)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. Nsdpfxsz E Nh Ne Ag Iolh With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: used, mileage: 238,000 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, navigation system, parking heater, soot filter, The vehicle has an engine failure. Main components: FH Globetrotter safety cab Wheelbase: 3,800 mm Chassis height: MED (medium) Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm Rear axle RSS1352A, single reduction, 13 t axle load, GVW 52 t Njdpfxsz I Hthj Ag Iolh I-Shift AT2612, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm Drive axle ratio 2.47 : 1 Reinforced engine brake Volvo Engine Brake+ (VEB+) Aluminum rims Dura-Bright EVO (polished) Paint: 1103WHIT Winter White Rest cab FH, one bed Info and media package with navigation Driver comfort package Side collision avoidance and lane change assist (both sides) Close-range camera on the passenger side I-ParkCool (integrated parking air conditioning with automatic temperature control) Auxiliary drive PTR-DH (fast), gearbox side, connection: 1 DIN at the rear for pump Cab interior, living Driver's seat Comfort, air-suspended, heated, seatbelt integrated Two armrests on the driver's seat Armrests covered in leather Passenger seat Standard, fixed Foam comfort mattress for lower bunk, firm, foldable, with safety net Mattress topper Basic (20 mm) Storage space under the bunk Storage compartments above the bunk, capacity: 245 l Control panel (basic) on the bunk (interior light, auxiliary heater, sunroof, and door locking) Cool box 33 l, with freezer compartment, under the bunk Compartment under the dashboard with drawer Cup holders front and rear Make-up/shaving mirror Two flexible reading lamps Interior lighting with dimmer and red night lighting Side sun visor, driver side Sun visor inside, manual roller blind Roof window and emergency exit, can be opened manually (tinted glass) Curtains on windshield and windows 2 rubber floor mats Central locking with remote control Auxiliary heater for cab, 2 kW Automatic climate control with sun sensor Cab interior, driving Load/axle load indicator in the vehicle display Battery indicator in the display Steering wheel, leather version Steering wheel adjustment in height and inclination, with additional steering column adjustment Roof antenna and preparation for CB radio Digital tachograph, generation 4 Eco-Cruise-Control (cruise control) incl. brake cruise control Lane keeping assistant Battery pulse indicator Adaptive Cruise Control (ACC) with collision warning and emergency braking function Immobilizer, transponder in the key Gear/I-Shift operation via control unit on the driver's seat I-See with map-based topographic information (high resolution) Stationary trailer brake active up to max. 7 km/h Electronic Stability Program (ESP), basic with normal center of gravity Chassis Rear axle load (technical) max. 13 t Front axle load (technical) max. 7.5 t Parabolic suspension front, 2-leaf (normal stiffness) Air suspension rear, 4 air springs Three ride heights for air suspension 650 liter aluminum tank left 112 liter AdBlue tank right Single-battery system: one battery block (2 individual batteries) for the entire vehicle electrical system Two work lights rear/top on the cab, LED white Trailer detection with LED sensor Frame end chamfered Frame thickness 6.5 mm Frame profile height 266 mm Frame length rear 825 mm Extra spring accumulator on the front axle Disc brakes, solid discs on the steering axle Brake discs on the drive axle, solid, 410 mm diameter Air compressor 2-cylinder, 1,100 l/min Support bow (steel) for trailer connections behind the cab Saddle coupling SAF-Holland/GF, SK-S 36.20, cast 1 chock, foldable, position at the front Five pneumatic

Condition: good (used), mileage: 429,338 km, power: 375 kW (509.86 HP), first registration: 03/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,180 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd Diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Globetrotter XL - LED lamp - Leather / Fabric - Alloy wheels - Manual - Radio/cassette - Lane keeping assist = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8364 kg, Gross weight: 18000 kg, Total tank capacity: 1175 liters, 2nd Diesel tank, Height of fifth wheel coupling: 112 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 12 tons, Alloy wheels, Suspension type: Air suspension, Type of cabin: Globetrotter XL, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 375 kW (503 Hp), Engine displacement: 12777 cc, Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Leather / Fabric, Seat adjustment: Manual = Additional Information = Transmission Gearbox: VOL, 12 gears, Automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 8 mm; Suspension: Leaf suspension Axle 2: Twin tires; Tire tread depth left inner: 10 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 11 mm; Tire tread depth right outer: 12 mm; Suspension: Air suspension Weights Unladen weight: 8,364 kg Payload: 9,636 kg GVW: 18,000 kg Condition Technical condition: good Optical condition: good Damage: none Nlodpfjzyk R Dox Ag Ioh Number of keys: 3 Financial information Leasing price: €1,193 per month (default, 60 months); Ask for more information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 424,698 km, power: 375 kW (509.86 HP), first registration: 05/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,180 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Carplay - Digital tachograph - Driver's card (tachograph) - Fixed - Globetrotter XL - LED lamp - Leather / Fabric - Alloy wheels - Manual - Radio/cassette - Lane keeping assist = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8352 kg, Gross vehicle weight: 18000 kg, Total fuel tank capacity: 1175 liters, 2nd diesel tank, Height of fifth wheel coupling: 112 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 380 tons, Alloy wheels, Suspension type: Air suspension, Cabin type: Globetrotter XL, Cruise control, Driver's card (tachograph), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 375 kW (503 hp), Engine displacement: 12777 cc, Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat upholstery: Leather / Fabric, Seat adjustment: Manual = Additional Information = Transmission Gearbox: VOL, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 315/70R22.5; Steered; Tire tread depth left: 12 mm; Tire tread depth right: 12 mm; Suspension: Leaf spring suspension Nlsdpfxjzyybro Ag Ieh Axle 2: Twin tires; Tire tread depth left inner: 11 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 11 mm; Tire tread depth right outer: 12 mm; Suspension: Air suspension Weights Tare weight: 8,352 kg Payload: 9,648 kg GVW: 18,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €1,193 per month (default, 60 months); Inquire for more information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1839 bar Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Nlodpjz I Dvysfx Ag Ijh Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Nsdpfx Agsz I D Ate Islh

Condition: used, functionality: fully functional, mileage: 590,517 km, first registration: 04/2022, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, Equipment: air conditioning, airbag, central locking, cruise control, fridge, navigation system, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, SCANIA 500 S - Registration: 04/2022 - Mileage: 590,517 km - ADR compliant - Full air suspension Nledpsz Hdgpefx Ag Ioh - Retarder - Stationary air conditioning - Navigation system - Double fuel tank - Double bunk - Tires with 50% tread *Vehicle price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 BUSINESS HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Box body - Drop-side - Reefer cell - Insulated with reefer - Van Domenico Truck srl is not responsible for any discrepancies in technical specifications, options, and features, which may differ from the description in some cases. We invite you to verify the specifications of the specific vehicle.

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Nlsdpfx Agsz Iqyfo Ieh Price: On request

Condition: excellent (used), functionality: fully functional, maximum cutting width: 360 mm maximum cutting height: 135 mm motor power: 8.5 kW maximum blade diameter: 500 mm minimum blade diameter: 490 mm blade speed: 2800 rpm CE marking 400 V Nledpfx Agjz E H Hcj Ish safety clutch feeder length: 660 cm receiver length: 530 cm machine length: 90 cm year of manufacture: 2011

Year of construction: 2015, condition: used, Used Machine Nlodpfx Asz Ek Dreg Ieh Year of Manufacture: 2015 Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Condition: used, mileage: 1,032,111 km, power: 375 kW (509.86 HP), first registration: 09/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Data* Volvo FH 500 4x2 Tractor * First registration: 2016 * Engine: Volvo D13K500 Euro 6 * Power: 500 hp (375 kW) * Displacement: 12.8 l * Transmission: Volvo I-Shift 12-speed automatic * Air suspension on rear axle * Aluminum rims Dura-Bright polished ----Safety equipment* ACC Adaptive Cruise Control * Collision warning system with emergency braking function * Lane Keeping Assist * Lane Change Assist * Driver Alert System (fatigue detection) * ESP Electronic Stability Program * EBS Electronic Braking System * ABS * Immobilizer * Engine brake Volvo VEB+ ----Comfort* Globetrotter cab * 2 beds * Stationary air conditioning I-Park Cool * Cab heater * Automatic climate control * Comfortable driver's seat, air-suspended and heated * Comfortable passenger seat, rotating * Electric sunroof * Electric windows * Central locking with remote control * Cooler box under the bed * Writing board on the steering wheel * Additional storage compartments * Two flexible reading lamps ----Multimedia & Communication* Radio/CD/MP3 * Bluetooth hands-free system * Navigation * Telematic system * Dynafleet preparation * FMS interface Nodpfez Siw Hsx Ag Ielh * 8 speakers * USB and AUX connection * 9" touch color display ----Lights & Visibility* LED daytime running lights * LED fog lights * LED work lights on the rear of the cab * Reversing/work lights LED * Rotating beacon lights LED (orange) * Electrically adjustable and heated mirrors * Front mirror * Wide-angle mirror * Sun visor (external) ----Chassis & Technology* Air suspension on rear axle * Electronic level control * Differential lock * Disc brakes all around ----Aerodynamics* Roof spoiler * Side skirts on the cab * Bumper with spoiler lip ----* Tire dimension front axle: 385/55 R22.5 * Tire dimension rear axle: 315/70 R22.5 * Fuel tank: 610 liters * AdBlue tank: 100 liters * Technical gross vehicle weight: 19,200 kg * Tare weight: 7657 kg * Overall length: 5890 mm * Wheelbase: 3,700 mm * Next inspection due: 03.2026 ----Vehicle number/Vehicle: 12346----Errors and prior sale are reserved----Advertisements and various inscriptions have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. We can offer you the following services for an additional fee: ----Trade-in of your old vehicle TÜV/inspection acceptance Complete export handling Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 290 l, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 20 m³, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, seat heater, soot filter, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particulate filter - Radio/Multimedia system - Rotating beacon - Reversing camera - Seat heating - Sun visor - Lane keeping assist - Stability control - Windshield Internal number for inquiries: 6-099 Volvo FMX 500 8x4 BB tipper truck, top-of-the-line!!! "TECNOCAR Emil-Camion S4" NEW AT PAVIC -> Available in the colors: Traffic white and Nardo gray (as in the advertisement) Vehicle data: Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm Engine brake, exhaust gas pressure regulator (incl. engine control for I-Shift) I-Shift ATO2612, automated 12-speed gearbox (overdrive), max. input torque: 2,652 Nm Reinforced gearbox Compact retarder, mounted on the gearbox (rear) with medium oil, braking power: 450 kW Total weight, technically: 60 t (observe the trailer load!) Wheelbase 4,350 mm Driver comfort package Selected Construction site package for FMX short cab Parabolic suspension front, 3-leaf (higher stiffness) Front axle load max. 18.0 t (technically) Rear axle load (technically) max. 32 t Drum brakes, cast iron material 290 l fuel tank, left side between double front axles AdBlue tank, usable content: 57 l, between the front axles Reversing monitor/camera Radio reception: AM/FM and DAB/DAB+ (analog & digital) Driver's seat comfort, air-suspended, seat belt in seat LED main headlights Roof antenna and preparation for CB radio Body data: Tipper body in top quality from the market leader EMILCAMION from Italy - 20 m³ - Steel structure made of HB 450, floor 8mm, sides 6 mm - Hydraulic tailgate - Lateral and rear reflective contour marking - Side marker lights LED - Stainless steel fenders - Stainless steel trim parts - Spare wheel holder - Stainless steel tool box on the passenger side - Manually foldable rear bumper - Electric tarpaulin black - Two-color paint (e.g.: NARDOGRAU AUDI LY7C, door frames and tailgate black) - Vibrator electric, controlled by remote control - Protective grille for rear lights Nedpfx Asz N Dtpsg Iolh - Water tank - Foldable ladder on the driver's side Price: FROM 164,990.00 € net This is a non-binding General information Year of manufacture: 2026 Cab: Local traffic Technical information Number of cylinders: 6 Engine displacement: 12,800 cc Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65-22.5; Steered Front axle 2: Tire size: 385/65-22.5; Steered Rear axle 1: Tire size: 315/80-22.5; Differential lock Rear axle 2: Tire size: 315/80-22.5; Differential lock Weights Unladen weight: 15,500 kg Payload: 26,500 kg GVW: 42,000 kg Functional Brand of body: Tecnocar Emil Camion S4 Pump: Yes Tipper: Rear Condition General condition: very good Technical condition: very good Optical condition: very good Damage: none

Year of construction: 2026, condition: new, The ProFruit UNLOADER 500 is a hydraulic bin tipper for lifting and emptying fruit, vegetable and berry bins into washing, sorting, crushing or conveying equipment. Operation The bin is positioned inside the tipping cradle. The hydraulic system raises and rotates the cradle, discharging the product directly into the receiving machine or conveyor. An enclosed cradle with high side walls guides the product and supports the bin during tipping. Operation is controlled by separate Start, Stop and emergency-stop buttons together with a manual UP/DOWN lever. Key features • Hydraulic lifting and tipping system • Enclosed tipping cradle for controlled discharge • Open front for convenient bin positioning and removal • Adjustable supporting feet • Suitable for integration into fruit and vegetable processing lines Technical specifications • Product types: fruit, vegetables and berries • Discharge applications: washing, sorting, crushing and conveying equipment • Controls: Start, Stop, emergency stop and manual UP/DOWN lever • Construction: stainless steel Nljdpfx Agjz Ndy Ae Ijh Hygiene and cleaning The stainless-steel construction is suitable for food-processing environments, while the open-front design provides accessible bin handling around the tipping cradle.

Condition: used, Year of construction: 2018, overall weight: 70 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: MB Conveyors Type: PA_ALL 2470 x 500 Condition: gebraucht CONVEYOR: - Nlsdothwrtspfx Ag Ijh Effective length: 2470 mm Effective width: 500 mm Height min. / max.: 800 / mm Total installed power: - Other equipment: PU Gurt, Lichtschranke, Abräumtaste CONTROL: - Bildschirmsprachen: - Operating manuel: - GENERAL DATA: - Total weight: 70 kg Total size L x B x H: 2,5 x 0,6 x m

Condition: used, mileage: 297,500 km, power: 375 kW (509.86 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Palfinger Epsilon long timber crane type S260L97 with Palfinger FG57X log grapple. Floor and high-seat controls, load moment [kNm] 229, stowage above cab, * Fully serviced with maintenance record ---- ----* Volvo Dynamic Steering (VDS) * 12-speed automatic transmission * VEB+ (Volvo Engine Brake Plus) * Rear axle with air suspension * Anti-lock braking system (ABS) * Retarder * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in cab * Lane departure warning with steering assistance (LSS-DWC) * L cab (long version) * External transparent sun visor * Electrically adjustable and heated exterior mirrors * Refrigerator in cab * Rain sensor * Electric windows for driver and passenger doors * Central locking with remote control * Immobilizer (transponder) * Engine-driven PTO * Two additional reverse crawler gears * Volvo I-Shift transmission * Automatic climate control * Auxiliary air heater * Driver's seat heating * Cab noise insulation * 6-cylinder engine * Telematics gateway with 4G * 285-liter fuel tank * 170-liter fuel tank * 90-liter AdBlue tank * Beacon lights left and right * Euro 6 engine version * Cruise control * Double PTO * Trailer recognition with LED sensor Nodpexl Iinefx Ag Iolh * Air-suspended driver's seat * Lower bunk * Driver comfort package * EBS (Electronic Braking System) * No spare wheel ----Sale only to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We will be happy to provide you with a leasing or financing offer.

Condition: excellent (used), TETRA PAK A3 FLEX 1000 B ASEPTIC FILLING MACHINE – 500 ML FORMAT Industrial aseptic filling machine, TETRA PAK A3 FLEX 1000 B, configured for the automatic packaging of liquid food products in 500 ml multilayer cardboard Tetra Brik Aseptic containers. The machine uses aseptic forming, filling, and sealing technology, integrating the sterilization of the packaging material, the formation of the brick, the dispensing of the product, and its hermetic sealing into a single machine. Tetra Pak A3 Flex technology is designed for the industrial packaging of previously sterilized products, allowing for the production of long-life beverages without the need for refrigeration before opening, provided that the required processing and sterility conditions are met. MAIN FEATURES - Manufacturer: TETRA PAK - Model: A3 FLEX - Version: 1000 B - Filling format: 500 ml - Type: Automatic aseptic brick filling machine - Packaging: Tetra Brik Aseptic - Automatic forming, filling, and sealing system - Continuous feed of packaging material via reel - Sterilization of packaging material - Formation of multilayer cardboard packaging - Filling of previously sterilized product - Longitudinal and transverse sealing system - Automatic cutting and forming of packaging - Control of aseptic conditions during the process - Automatic transport and discharge of packaging - Tetra Pak electronic control panel - Operating parameter monitoring system - Upper platform for access and maintenance - Industrial construction with stainless steel components - Integrable into complete aseptic packaging lines OPERATING PROCESS The multilayer packaging material is fed into the TETRA PAK A3 FLEX from a reel and passes through the sterilization system before being formed. Subsequently, the material is transformed into a continuous tube through longitudinal sealing. The product, previously treated using a compatible UHT system, is introduced inside under aseptic conditions. The machine performs the transverse sealing, cutting, and forming of the individual packages, producing hermetically sealed bricks ready for the next production stages. The finished packages can be transferred to inspection, coding, capping, grouping, case packing, and palletizing systems. APPLICATIONS Particularly suitable for dairy industries, juice, nectar, plant-based beverage, and other long-life liquid product manufacturers. Depending on the installed configuration, it can be used for: - UHT milk - Flavored milk - Dairy smoothies - Fruit juices Nedpfx Agez Rzido Islh - Nectars - Plant-based beverages (soy, oat, or rice) - Nutritional beverages - Other liquid beverages compatible with aseptic packaging The TETRA PAK A3 FLEX 1000 B constitutes an industrial solution for automating the aseptic packaging of beverages, combining packaging formation, filling, and sealing in a single machine. The exact formats, production capacity, and compatibility with different products will depend on the installed configuration and tooling. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMF 500 Linear Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS Travel X-Axis: 5.000 mm Y-Axis: 920 mm Z-Axis: 820 mm Panning head: 1°, Hirth Spindle speeds: 20 - 10.000 rpm Tool: SK 50 Toolchanger Tool capacity: 80 Table size: 2 x 2.700 x 900 (max. 5.610) mm Njdpfx Aez Rl N Ujg Ijlh NC rotary table Equipment Caliper: Heidenhain TS 649 Oil mist separator Internal cooling: 40 bar Cooling tank: 980 l Chip conveyor Electronical handwheel separating plate

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Nljdpfx Aoz Et E Ejg Ish Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Year of construction: 2015, condition: excellent (used), Exceptional Opportunity! From the former collection of the Max Planck Institute in Freiburg, we can offer you this highly efficient gene sequencing system, model "NextSeq 500," from the world-renowned brand "illumina." This system is one of the most powerful and widely used fully automatic gene sequencing systems, and it has become indispensable in virtually every laboratory worldwide. It is primarily used as a high-throughput system for the automated generation of DNA clone clusters through sequencing and primary analysis. Thanks to its particularly compact design, it is also perfectly suited for smaller laboratories and can be used ideally as a stand-alone device – all the necessary components are already integrated into the device, and complete operation can be performed via the built-in screen and a wireless keyboard. The device was acquired by the Max Planck Institute in 2016 and has been used very little. It has been continuously serviced by the manufacturer's customer service department and has only completed 395 runs – it is therefore in flawless condition both visually and technically – see the pictures. The device can be used immediately; however, for the sake of good order, we would like to point out that in a commercial operation, the legally required tests according to MTK/STK must be carried out again. Dimensions (H x W x D): approx. 585 x 534 x 635 mm Weight: approx. 85 kg The total weight of the system, including accessories and pallet, is approximately 110 kg! The device can be picked up from our premises during regular opening hours after prior telephone arrangement. For an additional charge, shipping can be arranged within three working days after payment receipt, insured via a shipping company. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not permitted! The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address provided. Nedpfez Rph Isx Ag Ielh

Condition: used, mileage: 444,500 km, power: 375 kW (509.86 HP), first registration: 04/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, VOLVO FH 500 – STAND-ALONE AIR CONDITIONING – TIPPING HYDRAULICS – ACC – STANDARD – EURO 6 – ENGINE BRAKE – 1ST OWNER – ----VEHICLE HISTORY * FROM 1ST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST * WORKSHOP MAINTAINED VEHICLE EQUIPMENT * EURO 6C * AUTOMATIC TRANSMISSION * ENGINE BRAKE * DISTANCE CONTROL (ACC) * LANE KEEPING ASSIST * ACTIVE BRAKE SYSTEM * STAND-ALONE AIR CONDITIONING * AUXILIARY HEATER * AIR CONDITIONING * ROOF-MOUNTED SEARCHLIGHTS * ONBOARD COMPUTER / NAVIGATION * XENON HEADLIGHTS * REFRIGERATOR * 1 X SLEEPER CABIN * PTO / SINGLE-CIRCUIT TIPPING HYDRAULICS * FULL AIR SUSPENSION * 1 X TANK * ADBLUE * 1 X TANK Nlsdpfxszx Irpe Ag Ijh * TOOLBOX * TIRE SIZE: 385 /65 R 22.5 * REAR: 315 / 70 R 22.5 * TÜV (TECHNICAL INSPECTION): 3 / 2027---- * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER). 5 DAYS, 15 DAYS, 30 DAYS PLATES, AND 15 DAYS AUSTRIAN PLATES. EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to change, errors and prior sale! You can find more vehicles on our website. Sales are made exclusively according to our general terms and conditions – see our homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, mileage: 358,094 km, power: 368 kW (500.34 HP), first registration: 02/2020, fuel type: diesel, empty load weight: 16,300 kg, maximum load weight: 23,700 kg, overall weight: 40,000 kg, axle configuration: 10x4, fuel: diesel, gearing type: automatic, emission class: euro6, total width: 2,550 mm, number of cylinders: 6, displacement volume: 12,742 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, EBS, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power mirror, retarder, seat heater, Key Features Internal Reference: 26100M Chassis Number: YS2 P0X 400 Serial Number: 683.546.203 Vehicle Model: P 500 10x4 3-SK Trösch / Swiss-Vehicle Vehicle Brand: Scania Product Category: Tipper Truck Condition: Used Mileage: 358094 Emission Standard: Euro 6 Date of First Registration: 21.02.2020 Last Periodic Technical Inspection: 17.02.2025 Fuel Type: Diesel Engine Displacement (ccm): 12742 Engine Power: 500 Transmission Type: Fully Automatic Cylinders: 6 Trailing Axle: Steerable Suspension: Steel-Air Nedsz Hrlmjpfx Ag Iolh Hydraulic System: Tipping Hydraulic System Retarder/Intarder: Yes Cab Vehicle Equipment: ABS, Bluetooth, CD Player, Differential Lock, EBS, Electric Windows, Electric Mirrors, ESP, Radio, Heated Seats, Cruise Control, Central Locking Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 10x4*6 NLA Axle 1: 315 / 80 R 22.5/11mm, Disc Brakes, Leaf Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Suspension Axle 3: 315 / 80 R 22.5/9mm, Disc Brakes, Air Suspension Axle 4: 315 / 80 R 22.5/10mm, Disc Brakes, Air Suspension Axle 5: 385 / 65 R 22.5/11m, Disc Brakes, Air Suspension Number of Axles: 5 Weights & Dimensions Gross Vehicle Weight: 40000 Payload: 23700 Unladen Weight: 16300 Vehicle Width: 2550 Body Body Manufacturer: TRÖSCH Body Model: 3-Sided Tipper Body Year of Manufacture: 2020 Body Equipment: Cab Control, Auxiliary Drive

Condition: used, Weiss Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Nljdpfx Agszd Ulte Ioh Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: A selection of ABB robots and turntables. Available models listed below: ABB Robots ABB IRB6700-155 MH IRC5 ABB IRB6700-200 SW IRC5 ABB IRB6700-235 SW IRC5 ABB IRC5M2004 ABB Turntables (Positioners) Njdpjz Sqhfofx Ag Iolh ABB IRBP B-750 ABB IRBP C-500 ABB IRBP K-300 L3150 D1200 ABB IRBPM2004K-300

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Nlodpfoyx U Slex Ag Ieh

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, Nsdpfx Aoy A H Tpeg Ielh 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.