Used Kartonierer 2024 W for sale (30,263)

Condition: new, mileage: 500 km, power: 338 kW (459.55 HP), axle configuration: 8x4, color: white, driver cabin: day cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at...). Iveco X-Way AD320X46BZ OFF 8x4 roll-off tipper. Body: HIAB ULT 26S53-W-ITF, wheelbase: 4,250 mm, Speedline aluminum rims, SLT, Rocking Mode (free-swing mode), roof hatch, mechanical version, cab rear wall with window, recommended for open bodies to observe rear traffic, air suspension for the cab, protective grille for headlights, transparent sun visor, installed on the outside of the cab roof, preparation for rotating beacon lights, flat roof painted in cab color, hot water circulation pump, suitable as a rest heating system, residual heat from the coolant is used and circulated in the system, passenger seat static, integrated 3-point safety belt in red, driver's seat luxury, air-suspended, heated, 4-way adjustable, lumbar support and headrest, with integrated 3-point safety belt in red, leather steering wheel, signal horn behind the bumper (compressed air), sun blind roller for side window, driver and passenger side, ashtray in center console, exhaust pipe raised behind the cab, parabolic suspension 2-layer, SL, parabolic spring on the front axle 1-leaf design (Super Loader), without jack, radiator cover under the bumper for rough off-road use, battery charging socket, clamps, fuel tank 210 liters, aluminum, maneuvering and towing hitch, rear axle ratio: 3.09, CAN bus interface CAN-OPEN for body control, infotainment 10 TFT display, without ECO-Roll transmission software (freewheeling function), adaptive cruise control (ACC), side marker lights, emergency braking assistant (AEBS), warning sounder for reversing, switchable, underrun protection on the side, electric parking brake, hazard warning lights, electronic stability program (ESP), front headlights LED, LED rear lights, fog lights including cornering/turning lights. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved!!! Aluminum rims, ESP, navigation system, auxiliary heater, particulate filter Cab: Local transport = Further information = Njdpfx Aozurh Heb Aedc Engine displacement: 13,000 cc GVWR: 32,000 kg Contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar Ndodpfx Aezvnfwsb Ajc EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Ndodpfeztu Dbsx Ab Ajc Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: used, machine/vehicle number: FN3992632, Year of construction: 2009, operating hours: 10,574 h, load capacity: 1,400 kg, lifting height: 5,000 mm, mast type: triplex, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,000 mm Load capacity: 1,400 kg MACHINE DETAILS Mast type: Triplex mast with full free lift Battery year of manufacture: 03/2024 Battery voltage: 24 V Battery capacity: 1,000 Ah Battery voltage at rest: 25.1 V Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,100 x 2,200 mm Own weight: 2,100 kg Service valid until: 05/2027 UVV (Occupational Safety Inspection) valid until: 05/2027 Operating hours: 10,574 h EQUIPMENT 3rd valve Triplex mast with full free lift Side shifter Comfort seat All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. Njdpfxezz Htws Ab Asdc In the event of late collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 202

Condition: used, Year of construction: 2011, operating hours: 8,261 h, Equipment: all wheel drive, Stock No. 5797 Atlas 160 W mobile excavator with additional hydraulics ----* Manufacturer: Atlas * Type: 160W - Mobile excavator * Year of manufacture: 2011 * Power-shift transmission * Color: Orange * Tires: 10.00 - / Twin tires * kW/HP: 105 kW / 143 HP * Deutz engine with 143 HP, water-cooled * 2-shell grab * Total operating hours recorded: approx. 8,261 hours * Hydraulic operating hours recorded: approx. 3,581 hours * Hydraulic connections for hammer and shears Ndjdpezwbf Tsfx Ab Aoc * 301-liter diesel tank * 180-liter hydraulic tank * 32-liter AdBlue tank * Air conditioning * Adjustable boom * 270-degree camera system * Rotating beacon * Max. km/h * Work lights * Transport dimensions: 7.60m long x 3.15m high x 2.54m wide Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt Ndjdpfswkpvvox Ab Aec - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Condition: good (used), Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Sim, heat exchanger control cabinet cooling unit -Type: 4299 -Voltage: 230V -Cooling capacity: 1,350 W -Dimensions: 400/245/H1000 mm -Weight: 54 kg Nodew S Ecgopfx Ab Asdc

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm Ndjdsw T Tlrspfx Ab Asc All technical details are given without obligation and subject to errors or omissions.

Condition: used, 23,000 units of Familog SP 6428 W storage containers - Euro containers, 60 x 40 x 28 cm, used 🧰 Product features • Material: PP • Condition: used, see photos • Color: blue • External dimensions: 60 × 40 × 28 cm • Internal dimensions: 57 x 37 x 26 cm • Volume: 53 liters • Load capacity: 20 kg • Weight: 2.76 kg • Bottom & walls: open (see photos) • Handle: Shell handle • Stackable: Yes • Per pallet: 32 units 💰 Price € 7,- net, excluding VAT. Price from one pallet: € 5.50 net, excluding VAT. • Quantity discount: upon request Nsdpexctx Nofx Ab Ajdc • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Changes and errors in technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms available immediately • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers - we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Year of construction: 1995, SERIAL NUMBER: 6572818 Ndsdpfx Aoy T Ig Eob Aec PAPIER STAPELLIFT

Condition: used, Year of construction: 2017, operating hours: 4,168 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, battery from week 32/2024, operating hours: only 4,168 hours! Previous owner: German Armed Forces. Rated load capacity: 1,500 kg. Lift height: 4,250 mm. Fork length: 1,000 mm. Sideshift, triplex mast with full free lift, in good condition and immediately ready for use. On request, we will be happy to provide you with a leasing or financing offer. Mr. Mihm (phone) will be pleased to assist you. Further information is available on our website. Subject to error and prior sale. Overhead guard = Further Information = Ndsdpfx Absy Tth Io Asc Lifting capacity: 1,500 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray. Nsdpfxsy Tuxze Ab Aodc

Condition: excellent (used), Year of construction: 1985, internal diameter 300 mm Njdpfoyrtvzsx Ab Aedc grinding depth 450 mm swing diameter 660 mm

Condition: used, mileage: 8,274 km, gearing type: automatic, fuel type: electric, color: yellow, overall weight: 1,062 kg, empty load weight: 682 kg, maximum load weight: 2,000 kg, lifting height: 130 mm, first registration: 05/2016, emission class: none, suspension: other, Year of construction: 2016, operating hours: 8,274 h, total length: 2,009 mm, driver cabin: other, wheelbase: 1,548 mm, construction height: 1,440 mm, fuel: electricity, load capacity: 2,000 kg, The Jungheinrich ESE 220 stands for reliable warehouse technology, high performance, and exceptional driving comfort. This proven model has been specifically developed for intensive in-house transport tasks and impresses with its robust construction and high cost-effectiveness in daily operation. Nedpfxsyruv Nj Ab Aodc Equipped with an automatic transmission, this low-lift pallet truck enables particularly precise and comfortable handling. Its intuitive controls ensure smooth and efficient workflows—a key advantage for frequent internal transport runs within warehouses, production facilities, or logistics centers. A particular highlight is the new battery from 03/2024, which guarantees additional operational reliability and long service life. This provides you with reliable power supply and reduced downtimes—a clear benefit for seamless operations. With 8,274 operating hours and first registered in May 2016, the Jungheinrich ESE 220 presents itself as a solid and proven warehouse solution. For decades, Jungheinrich has stood for long-lasting quality, excellent spare parts availability, and technology engineered for continuous professional use. Thanks to its compact design, with a length of 2,009 mm, width of 820 mm, and height of 1,435 mm, this machine is ideal for use in confined warehouse spaces. The 1,548 mm wheelbase provides stable road-holding and a secure driving experience—even with high-frequency transport tasks. The 125 mm lift height is optimal for the fast and efficient internal transport of pallets and goods. This is exactly where the ESE 220 plays to its strengths, wherever speed, maneuverability, and reliability are critical. Sale exclusively to commercial customers (agriculture, freelancers, small and large businesses), or for export. Subject to prior sale and errors excepted.

Condition: good (used), SNDKC 113-03247 / K49 Area of application: Drive technology / e.g. Lisec devices, etc. Ndodpfx Aeypkxhjb Ajc Width: 65 mm Height: 430 mm Depth: 255 mm Weight: 5450 g Condition: Good, second-hand

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 16i-MB, overall weight: 1,700 kg, spindle speed (min.): 500 rpm, spindle speed (max.): 30,000 rpm, spindle motor power: 10,000 W, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, input current: 25 A, CNC Machining center WILLEMIN W 408MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control: FANUC 16i-MB Number of axes: 5 Stroke X axis: 250 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 300 [mm] Feed rate on X, Y and Z axes: 30000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 3.7 [kW] Angular C axis stroke: 360 [°] B axis swivelling stroke: 115 [°] Spindle type: HSK-E40 Min. spindle speed: 500 [rpm] Max. spindle speed: 30000 [rpm] Ndedpfozcx Dfex Ab Asc Spindle power: 10 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 95 [mm] Max. tool diameter: 63 [mm] Lubrication tank capacity: 80 [l] Collant pump flow rate: 40 [l/min] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 1700 [Kg] More information upon request.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis CHIRON DZ 18 W MAGNUM was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 630 mm. The machine includes a table size of 1250 × 850 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ 18 W MAGNUM vertical machining centre we have for sale. Contact us for further details. - Control System: Siemens CNC- Spindle Taper/Chuck: SK40- Spindle Speed Range: 320 – 10,500 rpm- Tool Magazine Capacity: 2 × 12 slots (24 tools total)- Tool Change Time: approx. 1.9 s- Chip-to-Chip Time: approx. 3.9 s- Retrofit/Overhaul Date: 2021 - Complete modernization: • main spindles overhauled • ball screws replaced Nsdpfx Aszcyh Eob Ajdc • tool changer overhauled, • axis systems/guides/bearings overhauled • hydraulic/pneumatic systems updated • electrical system and cabling modernized • safety elements replaced • geometry adjusted- Cooling System: Internal cooling (IKZ) via Knoll paper band filter and high-pressure unit (Unit Number: 646)- Chip Management: Integrated chip conveyor and swarf bin- Workholding: Hydraulic workpiece clamping on a 180-degree workpiece changing table (W-axis)- Additional Features: Prepared for 4th/5th axis integration, attached cabinet climate control unit

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 18 kg, load capacity: 6 kg, arm reach: 700 mm, controller manufacturer: NACHI, THIS ROBOT HAS NEVER BEEN USED The NACHI EC06-7020 is a high-speed, high-precision 4-axis SCARA industrial robot designed for fast automation tasks such as pick & place, assembly, packaging, and light material handling applications. It offers a compact design, easy integration and excellent cycle times, making it ideal for high-volume production environments. Applications: Pick & place, assembly, packaging, sorting and general automation tasks. Ndsdpfx Abjzgtu So Asc Technical Specifications: Model: EC06-7020 Type: SCARA (4-axis) Payload: up to 6 kg (rated 3 kg) Reach: 700 mm Repeatability: ±0.02 mm Axes: 4 Communication: PROFINET enabled Installation: Floor mounted Stock: Multiple options available Price: Please get in touch to get an offer As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. We have a dedicated team handling these robots. If you share details about your project, we can recommend and provide the most suitable robot for your needs and provide support throughout your project.

Condition: used, Year of construction: 2016, operating hours: 784 h, 2016 | Genie TZ-50 DC w/Drive (17m) | Used Trailer-Mounted Boom Lift | 784 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 16900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points 34 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: All operations work, but the battery is low. The chassis is rusted, and the trailer could use a new paint job. 📄 Want to see the full inspection, extra photos, or a video? Ndedpfx Aozgw R Rsb Ajc Tip: The reference "38146 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 1998, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW dimensions 0,90x0,25x0,70 m weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications Nodpfxjzhn Tlo Ab Aedc - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 1998 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 12,000 rpm, travel distance X-axis: 505 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: OKUMA, controller model: OSP-U100L, number of slots in tool magazine: 44, number of axes: 6, This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 2000 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details. • Y-axis: yes • Through-spindle coolant (water) Nodpfx Abszhnb Ao Aedc • Lower turret: no live tooling • Simultaneous machining: not available • Auto door • Robot interface: ready Additional equipment • SMW chucks: 10" and 8" to be supplied • Note: chucks currently installed on the machine are not included Technical Specification Counter Spindle Yes Driven Tools No Taper Size HSK 63 Through-spindle Coolant Yes

Condition: used, mileage: 699,000 km, power: 213 kW (289.60 HP), first registration: 09/2018, fuel type: diesel, overall weight: 18,000 kg, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, total length: 9,420 mm, total width: 2,600 mm, total height: 3,860 mm, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,380 mm, Equipment: air conditioning, tail-lift, Equipment: Tail lift * Alloy wheels Speed control: Cruise control Climate control: Automatic climate control Hydraulic system: None Ndsdo Acc Abspfx Ab Aoc Thermoking T600 R Internal dimensions of the box: L 7.50 m, W 2.50 m, H 2.38 m Palfinger tail lift, 1500 kg capacity Payload: 8580 kg The truck is in good condition! Valid TÜV (technical inspection) until 03-2027.

Condition: used, maximum load weight: 13,100 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Vehicle No. G0123619_1 – Manufacturer: Krone. * Simple corner fittings * Contour marking on the side/rear * Load certificate Code-XL * Portal door with simple swivel rod locks (exterior) * Forklift accessible * Telescoping support legs * Device for rail loading * Lashing recesses * Lashing points * Partially keyhole system inside Smooth furniture floor. Delivery time: IMMEDIATELY AVAILABLE. Furniture fittings. Technically ready for use, no further repairs required. Partially painted. Substructure with signs of wear. Valid UVV certificate. LASI CODE XL!!! Ndedo Adm S Aspfx Ab Asc Dimensions are approximate. Offer subject to change; intermediate sale reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ndsdpfx Abs Adq R Ae Aec

Condition: used, empty load weight: 7,480 kg, maximum load weight: 23,520 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 8,000 mm, suspension: air, tire size: 235/75R17,5 -/140J, color: other, gearing type: other, front tire size: 235/75R17,5 -/140J, rear tire size: 235/75R17,5 -/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 18 tie-down points, 12 ladder rack sockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic, one-piece ramps, hydraulic ramp adjustment, loading height: 880 mm, incl. axle load indicators, -- subject to printing errors, mistakes and changes, sample images --, more data at: !, More Details: ! Njdpfx As Adpm Aeb Ajdc