Used Zachse Manipulator for sale (346)

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Pgedpfx Aneq U R T Negsu Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter Pgedjq U Sa Sjpfx Angsu of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing applications Podpfxjfgpfme Angjgu Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm screw clamp - Movable in three axes (horizontal, vertical, rotational) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 balancer units for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - for virtually weightless suspension of small devices - Load capacity adjustable in stages - Constant tensile force Space requirement L x W x H: 770 x 310 x 1200 mm Weight: 19 kg Good condition

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Pgsdpfxsurlcrs Angsu Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Winding diameter: 40 mm, laying width: 150 mm Pjdpfxeylzurj Angegu Max. wire diameter: 1.0 mm HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: used, Year of construction: 2011, operating hours: 18,693 h, functionality: fully functional, overall weight: 1,465 kg, load capacity: 235 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 6640 M2004 manipulator (IRB 6640-235/2.55 Standard Absolute Accuracy) and IRC5 M2004 controller for industrial automation applications. The unit is used. Typical applications include handling, assembly, machining, and general automation. The payload is 235 kg with a reach of 2550 mm. It was manufactured in 2011 and has 18,693 operating hours. The installed software is RobotWare Version RW5.15_15.01.9157 (or 5.15.9157.15). It is equipped with a main connection cable for power and data, a FlexPendant programming device, a heavy-duty mounting base, and the following software options: Absolute Accuracy, SafeMove, German language support, World Zones, Path Recovery, Collision Detection, FTP and NFS Client, and Multitasking. Psdpfx Anezal T Uogegu

Condition: ready for operation (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Podpfx Ajzl Si Sengjgu Model: KR200-2 COMP Payload: 200 kg Reach in mm : 2700 mm Condition: Used & Tested Year: 2007 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: used, Year of construction: 2017, operating hours: 1,452 h, functionality: fully functional, machine/vehicle number: Roboter: 2600-107871 / Steuerung: 2600-107871, overall weight: 417 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Type B manipulator and an IRC5 Single controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 12 kg and a reach of 1850 mm. Manufactured in 2017, it has 1452 operating hours and is running RobotWare Version 6.04.01.00. It is equipped with two cable sets for power and control connections, a FlexPendant DSQC 679 teach pendant, a transport frame/mounting base located under the manipulator, and the software options World Zones, Path Recovery, and Collision Detection. Podpfx Anozak Htjgogu

Condition: used, Year of construction: 1971, weight max. 1000 kg workpiece length . mm work piece width . mm Drive elektr. dimensions of the machine ca. 4,2x2,1x2,2 m Pgsdpoyuqdbefx Angou

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Pgsdpou H R Iwefx Angju Weight: approx. 65 kg Very good condition

Condition: excellent (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 COMP Payload: 200 kg Pgsdpfew H A A Ijx Angsu Reach in mm : 2400 mm Condition: Used & Tested Year: 2007 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: good (used), Tehac welding manipulator table Diameter bed: 480 mm Height max: 113 cm Pjdpfx Anoldg S Isgsgu

Condition: used, Year of construction: 2010, operating hours: 46,148 h, functionality: fully functional, machine/vehicle number: Roboter: 66-66458 / Steuerung: 66-66458, overall weight: 1,564 kg, load capacity: 130 kg, arm reach: 3,200 mm, ABB industrial robot with IRB 6640 M2004 (variant: IRB 6640-130/3.2) manipulator and IRC5 M2004 controller for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. The payload is 130 kg with a reach of 3200 mm; it was manufactured in 2010 and has 46,148 operating hours. The software version is RobotWare RW 5.13.1037.01. It is equipped with an ABB FlexPendant programming pendant, a connection cable set, a cable management system (dresspack) on the robot arm, and a Foundry Prime protective version with a “FOUNDRY 2” label. Pgsdezal U Espfx Angeu

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, arm reach: 3,000 mm, type of input current: three-phase, load capacity: 500 kg, control cabinet width: 600 mm, control cabinet height: 2,000 mm, overall weight: 300 kg, input voltage: 220 V, controller manufacturer: Tawers, input current: 22 A, pivoting range: 270 °, teach pendant manufacturer: Panasonic, Equipment: documentation/manual, type plate available, Panasonic Welding Robot TA-199WG/PA-C Frame, complete with controller, software, and full set of control cables; Robot Controller GIII Modules for rotator and bearing unit Rotator Pana Dice 500 and rotator, Pana Dice 500 (can operate simultaneously on the machine) Wire feeder Power source for MIG/MAG and TIG welding, Panasonic Tawers Pulse Anthropomorphic manipulator Water-cooled welding torch with anti-collision function Water chiller Tawers TA-1900 WG III Manipulator Psdpfx Aeyzn D Hengjgu Number of controllable axes: up to 12 Maximum welding speed - 180 m/min linear Maximum working area: 1895/3790 mm Panasonic Pulse Power Source Welding methods - MIG/MAG and TIG Duty cycle 350A/80% Panasonic Controller 7-inch color display Windows operating system Panasonic Pana Dice 500 Rotator Max load - 500 kg Panasonic Pana Dice 1000 Rotator Max load - 1000 kg

Condition: ready for operation (used), Year of construction: 2011, load capacity: 200 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Psdpfxezl Sp Ee Angsgu Model: KR200-3 COMP Payload: 200 kg Reach: 2700 mm Condition: Used & Tested Working video: will be provided upon request Year: 2011 Included: Manipulator + KRC2 ED05 Cabinet + Teachpendant + All Wire Sets Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Pgsdpfefz Dmmjx Angju Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, load capacity: 180 kg, arm reach: 3,100 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending Pgjdpfszpx Icox Angsu Brand: KUKA Model: KR 240 L180-2 2000 Year: 2007 Control Cabin: KRC2 ED05 Rated Payload: 180kg Access Distance: 3100mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + Shipping: NOT included in the price Payment: 100% payment prior to collection Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), Year of construction: 2006, load capacity: 240 kg, arm reach: 2,800 mm, controller manufacturer: KUKA, controller model: KRC2 ed05, The KR360 is designed for a rated payload of 360 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR360 L240-2 (MORE option is also available) Condition: Used & Tested Year: 2006 (More options are also available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website) Pgjdpfxjw H Ny Hj Angou

Condition: used, The SAMO slitting line, 2001 processes material up to 1,000 mm wide and is integrated with the PROMEC packaging line, 2019. (N19). Installed electrical power is 451 kW; Area 365 sq Meters Capabilities include: Coil Inside Diameters: 400 / 500 Coil Outside Diameter: 1,500 mm Strip width: Entry: 350–1,040 mm Exit: 20–1,020 mm Thickness: 0.3–3.0 mm Line Direction; Left to Right Siemens S7-400 PLC Installation includes: Coil Stand- 3 Coils Uncoiler with Snub Control Roll Motor: 26.5 Kw DC Edge Control, EMG Pgsdpfx Anjz Iq U Njgou Paper Winder Peeler Table Pinch Roll Crop Shear Vollmer Contact Thickness Gauge, Slitter Head Motor Drive: 72Kw, DC 400 Volt Edge guiding with automatic adjustment before slitting head Horizontal guide rolls before slitting head Shaft OD: 180mm Slitting Knives OD: 280mm Scrap winder Edge guiding at exit Rotating tooling turnstile on rails – 4 sided with 2 arms per side Pit with Pit Car Tension stand: Tension stand on linear rails Material table with horizontal and vertical position 4 horizontal guide rolls – pneumatically engaged 3 Roll Tension bridle roll system as material break Bridle roll motor: 138kW DC Crop shear Material table Re-coiler: Full hydraulic drum Overhead separator arm Motor: 190kW DC drive Ground level L-Shape coil car with overhead hold down arm 4 – arm coil turnstile with push-off arm (5) Above ground Coil Cars All hydraulics and Controls PROMEC Packaging line: (See below) Underground coil car in front of Turnstile Scale PROMEC PACKAGING LINE, 2019 Layout Code: N19 Automatic packaging system serving the SAMO slitting line. Installed electrical power: 65 kW. Processes strip widths from 40–200 mm and thicknesses from 0.2–3.0 mm. Siemens S7-400 PLC First table: Tilting table with mandrel for coil handling Signode Strapping Machine Overhead Manipulator- Horizontal Coil Handling with expanding mandrels into ID or 3 arm OD clamping Packages eye to the sky or eye to wall. All hydraulics and Controls

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, load capacity: 280 kg, arm reach: 2,080 mm, controller manufacturer: KUKA, controller model: KRC4, The KUKA KR 280 R3080 Ultra is a high-performance 6-axis industrial robot from the QUANTEC series, offering a 280 kg payload capacity and a reach of 3080 mm. Designed for versatility, it excels in applications such as welding, material handling, palletizing, and machining. Its lightweight yet rigid construction ensures high precision, energy efficiency, and long-term reliability, even in demanding industrial environments. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly Pgsdew Na N Nspfx Angou -Dispensing -Remote TCP. Model: KRC4 KR 280 R3080 Condition: Used Year: 2018 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Year of construction: 2022, condition: new, Attachment suited for: Construction machines The high speed manipulator on the pictures is manufactured for casting factory. They put the the materials into the grinding process. We can manufacture boom-arm in hydraulic or electrical systems with breaker, bucket, grapple etc.. For detailed information please contact us Pgedsn Tm Sxepfx Angju

Condition: excellent (used), Year of construction: 2007, load capacity: 140 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The robot offers a payload capacity of 140 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation Pedpfsw Idwusx Angsgu The robot is designed for reliable operation in demanding industrial environments. Model: KR 200 L140-2 comp Payload: 140kg Arm Reach: 2700 Condition: Used and Tested Year: 2007 Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 Psdpfxszk Rdxe Angsgu BENDING MOMENT SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 1,483 kg, load capacity: 185 kg, arm reach: 2,800 mm, ABB industrial robot with IRB 6640-185/2.8 Foundry Plus manipulator and IRC5 M2004 controller for industrial automation processes. The condition is used and tested. Typical applications include handling, foundry applications, machining, and general automation. The payload is 185 kg with a reach of 2800 mm. Manufactured in 2010, it has 47,532 operating hours and RobotWare 5.12.4003.04 software. It is equipped with a FlexPendant teach pendant, a robot connection cable set, a power cable, and a Foundry Plus protection version. Pjdjzamhtopfx Angjgu

Condition: used, Year of construction: 2018, operating hours: 7,490 h, functionality: fully functional, machine/vehicle number: Robot: 4600-107494 / Controller: 4600-107494, overall weight: 538 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm. Year of manufacture: 2018. Operating hours: 7490. Software: RobotWare RW 6.07.01.00. Equipped with an ABB FlexPendant programming device, connection cable set, and a Foundry Plus protective version with a label bearing the inscription “Foundry Plus”. Pedpfx Aszamf Ssngjgu