Used Vanhool Semi Low-Loader for sale (19,109)

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from Iedpfx Ajz Dmnwshysih

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin Iiedpezzhfujfx Ahyeh * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: used, empty load weight: 13,100 kg, maximum load weight: 22,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2013, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | VAN ECK UT3Z Double-decker refrigerated semi-trailer | Carrier Vector 1950 Diesel, operating hours: 8791h | Gross weight: 36,000 kg, payload: 22,900 kg | Dimensions of loading area: 1st deck: Length: 13.20m, Width: 2.48m, Height: 1.82m. 2nd deck: Length: 9.65m, Width: 2.48m, Height: 1.78m. Passage between axle units: 1.50m | Portal doors | BPW axles with single-wheel suspension, Tridec | 2-zone cooling, 2 evaporators | Tire size: 385/55R22.5 | Wabco Smartboard | Errors, input errors, and prior sale are subject to change. Isdpfjz Hvtzjx Ahyoih

Condition: new, overall weight: 58,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, OTHER GÜVEN LOWBED TRAILER? 4 AXLES? HYDRAULIC RAMPS? STEERABLE AXLE? OVERWIDTH DEVICE?----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERABLE AXLE? HYDRAULIC RAMPS? MOVABLE RAMPS? OVERWIDTH? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER, OUR OWN PRODUCTION FROM TURKEY * 4 AXLES * AXLE DESIGN * TRI-AXLE * THIRD AXLE WITH STEERABLE AXLE * WITH LIFT AXLE * OSMAN KOÇ AXLES * DRUM BRAKE * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOWBED, 6 M LONG * KING PIN ADJUSTABLE AND 22 T DIMENSIONS * FROM RAMPS TO KING PIN (CLOSED): 9.40 M Ijdeymu Nxspfx Ahyjih * FROM RAMPS TO KING PIN: 12.10 M * EXTENDED TOTAL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY MOVABLE TO THE LEFT AND RIGHT EQUIPMENT * AIR SUSPENSION * LOAD SECURING LASHING POINTS * OVERWIDTH PREPARATION * TOOL BOX TIRES * TIRE SIZE: 235/75 R17.5 * DUAL TIRES WEIGHTS * EMPTY WEIGHT: 12,500 KG * PERMISSIBLE TOTAL WEIGHT: 68,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICAL PERMISSIBLE TOTAL WEIGHT: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY PRODUCED DESCRIPTION GVN TRI-AXLE LOWBED TRAILER WITH LIFT AXLE AND STEERABLE AXLE (3RD AXLE), AIR SUSPENSION AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KING PIN. HYDRAULIC, SWIVELING RAMPS, AS WELL AS OVERWIDTH PREPARATION AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY LOAD TRANSPORTS.----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least 500.00 EUR / 1,000.00 EUR will be charged. Subject to change, errors and prior sale! You can find more vehicles on our website: Sales are exclusively subject to our general terms and conditions - see website. Important note - Important information: Despite careful verification of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, maximum load weight: 39,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list Complete equipment list available upon request. Equipment: * Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick. Loading platform: * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, located horizontally at the front of the loading platform, for (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond-plate flooring over the axles. Kingpin: * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Axles: Iiedpfjz Rr R Sjx Ahyeh * BPW axles and suspension, 2 axles rigid, 1 axle with trailing arm steering * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually Air suspension: * with lifting and lowering valve Tires: * 235/75 R 17.5 3PMSF – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Steel construction: * made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: * according to EU regulations * Lighting: 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel construction automatically blasted with a shot blasting machine after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint build tested in a salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front bulkhead, approximately 400 mm high * A spare wheel holder in front of the bulkhead * Mounting rail for aluminum loading ramps on the gooseneck with integrated impact protection (± 56 kg) * Galvanized folding supports under the bevel of the loading platform * A mounting bracket for a rotating beacon on the rear of the trailer * On the gooseneck and rear panel, on the left and right, a mounting bracket for warning signs including socket * Load indicator to determine the axle loads including load diagram * 1 pair of recessed lashing rings along the center beam at the rear in the bevel (LC 10,000 daN) * Additional fastening option for the license plate of the trailer at the rear right of the trailer Incl. special accessories: * Aluminum sideboards and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvan

Condition: used, empty load weight: 8,550 kg, maximum load weight: 27,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2021, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 1 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2020, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, 1st axle can be lifted, ABS (anti-lock braking system), hydraulic ramps, rear supports, outriggers. 9-ton axles, drum brakes, loading height approx. 880-950mm, can be widened to 3,050mm, length of low-bed platform 8,800mm, length of gooseneck 4,000mm, total weight with 3-axle tractor unit 42,000kg, payload 31,290kg, RAL 3003. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Iisdpfx Ahozdvc Heyeh

Condition: used, empty load weight: 11,360 kg, maximum load weight: 42,840 kg, overall weight: 54,200 kg, axle configuration: > 3 axles, first registration: 10/2022, suspension: air, tire size: 245/70 17,5, tire condition: 40 %, wheelbase: 1,310 mm, color: black, Year of construction: 2022, front tire size: 245/70 17,5, rear tire size: 245/70 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, hydraulic winch * Warntafel * Length 13615 to 18315mm * 4.7 meters telescopic * hydraulically lowerable Eco ramp * widenable Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Isdpfxjzxa E Io Ahyoih Ask our trained specialists, we will be happy to advise you.

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) Iiedpfxezvt Tyj Ahyjh * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: new, maximum load weight: 34,104 kg, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Further information here: Isdev D Abgopfx Ahysih

Condition: new, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, front wall approx. 800 mm high, 14 x stanchion pockets in the outer frame, 8 x stanchions, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiodpfx Ahoz Syfajyoh

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the highbed approximately 4,140 mm, length of the lowbed approximately 8,600 mm, loading height approximately 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, front wall approximately 1,600 mm high, 18 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing points, 4 pairs of container locking mechanisms for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, surcharge for aluminum ramps, price: 2,200 €, spare wheel, price: 300 €, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Ijdpfx Ahoz Syd Noyeih

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 08/2026, loading space length: 11,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, * Gooseneck with storage boxes * Trailing axles * Hydraulic loading ramps * Low-bed, extendable ----* Tire dimension: 235/75R17.5 * Technical total weight: 42,000 kg * Tare weight: 8,700 kg * Overall length: 13,150 mm * Next inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. Iiodpfxoz A N Ano Ahyeh ----?YOUR VTS TEAM

Condition: new, maximum load weight: 38,953 kg, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Total weight: 49,500 kg Saddle load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3850 mm Saddle height loaded: 1200 mm Loading platform length: 9300 mm Extendable by: 0 mm Ijdpfx Asg Sk Trohyoih Axle distance: 1360 mm Rear deflection radius: 2300 mm Loading height at max. load: 860 mm Overall width: 2540 mm Suspension travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with beveled front corners at 45° and a rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform after the gooseneck, hydraulically raisable and lowerable, length approx. 2,800 mm, with a rear bevel of approx. 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the central beam at the front (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, with non-slip steel plate flooring over the axles. Ramps: Two-piece steel ramps, one pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood flooring. Ramp with hydraulically raising and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for a 24t lifting capacity (50t test load). Tires: Tires 235/75 R 17.5, as selected by the manufacturer. Axle: SAF axles, air-suspended, with drum brakes, with raising/lowering function. The last axle is steered with an electro-magnetic reverse steering lock, which can be activated via reverse gear or manually. Axle tool. Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel structure: Steel structure made of high-strength fine-grained steels. Steel qualities: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat in a single color in RAL colors of your choice. Rear part metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories 2" kingpin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connection bar at the front. 4 pieces of wheel chocks with holders on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or the electric winch (35mm², 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with plug connection (ANDERSON-ANDERSON) Galvanized folding supports under the bevel of the loading platform. One bracket for a rotating beacon on the rear of the semi-trailer. Operating valves for the ramps mounted on the right side of the semi-trailer. (± 4 kg) Yellow reflector tape according to EU regulations on the side and r

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge Ijdpfjz N Nq Hjx Ahyoih - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, maximum load weight: 78,380 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 06/2023, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Isdpfxsz Ifk Ee Ahysih Excerpt of the equipment, complete equipment list available upon request. Equipment: * 2-inch kingpin * 12 t Broshuis SL axles * Extendable width extensions * 4 pairs of lashing points on the central beam, 10,000 daN * 1 pair in the fixed section in front of the telescoping section * 3 pairs behind the telescoping section * 9 pairs of lashing points in the outer frame, 10,000 daN * Holes in the outer frame for attaching lashing straps * Jost 2-speed geared support winch * 4 extendable, illuminated width extension panels * 3 plug-in side panels on the gooseneck (length approx. 2,400 mm) * Rear corner posts, plug-in/removable * 4 sets of shims with holders under the loading platform at the support legs * 1 pair of lashing points in the outer frame of the gooseneck, 10,000 daN * 3 pairs of lashing points in the outer frame of the gooseneck, 5,000 daN * NATO socket - NATO spiral cable - 2 x 7-pole electrical system * 1 x 7-pole EBS - 1 socket at the front and rear for auxiliary steering * 1 storage box on the gooseneck, spanning the entire width, with angled corners (45°) * Opening from above - doors in the corners can be locked (not continuous to the storage box in the middle) * 6 sets of plug-in uprights, approx. 1,200 mm high, incl. holder on the gooseneck * WADER container pockets for 1 x 20 ft and 1 x 40 ft - Brake connections, red/yellow - EBS WABCO * Rear support, telescoping * 2 LED reversing lights at the rear * LED lighting (DK round) * 1 LED rotating beacon * 8 pairs of upright pockets in the outer frame of the loading platform * 3 pairs of upright pockets in the outer frame of the gooseneck * Contour marking, yellow on the sides / red at the rear * Adjustable attachment rails for loading ramps * 3 LED flashing beacons at the rear of the vehicle * RAL 3002 carmine red * 2 ECE plates at the rear

Condition: used, maximum load weight: 34,780 kg, overall weight: 48,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2027, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low-bed/low-loader trailer with full equipment First registration 05/2025 German registration and from first owner Overall length 13,162 to 19,012 mm (telescopic, 5,850 mm, extendable in 500 mm increments) Saddle height 1,200 to 1,280 mm Length of low-bed platform in normal position 6,350 mm Length of low-bed platform when extended 12,200 mm Length of gooseneck 3,720 mm Length of rear axle frame 3,020 mm Loading height on rear axle frame only 900 mm LOADING HEIGHT LOW-BED platform approx. 300 mm (loaded) Total weight (technical) 48,000 kg Iiedpfx Aoz Iu Uyshysh Saddle load (technical) up to 24,000 kg Axle load (technical) 24,000 kg Unladen weight 13,220 kg Chassis: 3-layer paint finish RAL 7024 including complete hot-dip galvanizing Detachable gooseneck with external main frame GROENEVELD central lubrication system for front and additional system for rear All axles hydraulically steered, TRIDEC system SAF axles with drum brakes WABCO trailer EBS with anti-roll protection RSS Air suspension with lifting and lowering system with 190 mm total stroke Tires 9x 245/70 R 17.5 Continental ALCOA aluminum rims, Dura-Bright, high gloss Aluminum air tank 24-volt electric hydraulics Overwidth package 8 pairs of foldable loading platform extensions, 225 mm each 3 pairs of container locking adapters for accommodating a 40 ft or 20 ft container Side wall structure on the saddle platform Ramps for the low-bed platform 5 pairs of swivel lashing eyes, 10,000 daN lashing force in the low-bed 4 pairs of stake pockets in the outer frame 3 pairs of swivel lashing eyes on the rear 1 pair of lashing eyes in the rear bumper, LC 6,000 daN RENTING is the new BUYING, with us, also available for rent or full-service leasing immediately -----

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) Iisdpfx Aozqiiajhyoh - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Iodpfxev D Abte Ahysih

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Painting 6-layer end treatment Iisdpfx Ahjzlmkwjyjh Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Gooseneck: Gooseneck with angled front corners at approximately 45° and rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring approximately 30 mm thick Loading platform: Double-extendable design with rear slope of approximately 500 mm x 8°. 6 pairs of lashing rings that fold outwards (LC 5,000 daN) 4 pairs of lashing rings that fold outwards (LC 10,000 daN) 1 pair of lashing rings horizontally at the front of the loading platform (LC 10,000 daN) 1 intermediate table, approximately 250 mm Hardwood flooring approximately 48 mm thick, checkered steel plate over the axles Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles: Isdpfx Aez Sh Htshysih BPW axles and suspension; all axles hydro-mechanically steered. Technical axle load: 12,000 kg each Air suspension with lifting and lowering valve Axle tool Tires: Tires 245/70 R 17.5, load index (146/146 F) Brand of our choice Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and durable corrosion protection High-quality 2-component (2K) topcoat, single color in RAL 3002 carmine red Rear section metallic and painted in RAL 9010 (pure white) Steel structure: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations Lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connecting bar with 24N, 24S & 15-pole sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Including the following additional equipment: 2-inch kingpin Galvanized steel front wall, approximately 400 mm high Yellow-red air couplings on the galvanized front connecting bar A spare wheel holder in front of the front wall Electro-hydraulic unit Rear steering from front and rear, operable via cable remote control with pushbuttons, with single-axle steering control (without installation in the tractor unit) Mounting on the rear area of the gooseneck for aluminum ramp plates Mounting rail for aluminum ramp plates at the rear of the vehicle Galvanized folding supports under the slope of the loading platform Aluminum side walls and rear wall on the gooseneck, plug-in design, approximately 2,440 x 400 mm (L x H) The rear galvanized plug-in edges are removable (overall length approximately 2,560 mm) A galvanized toolbox, integrated into the angled gooseneck 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or a 45' container 8 pairs of pocket holders for plug-in edges approximately 100 x 50 mm in the outer frame of the loading platform Extensions galvanized, extendable by approximately 230 mm on each side Sliding mounting rails for aluminum ramp plates at the rear of the vehicle 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump 2 LED reversing lights mou

Condition: used, empty load weight: 14,200 kg, maximum load weight: 33,800 kg, overall weight: 48,000 kg, first registration: 05/2019, loading space length: 9,600 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 235/75 R 17,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 3 axles, BPW axles, air suspension, forced steering on axles 2 and 3, ABS (anti-lock braking system), lashing points, two-part loading ramps, hydraulic ramps, rear supports. Body: Doll 3-axle low-bed semi-trailer with wheel recesses (450 mm height), axles 2 and 3 hydraulically steered, remote control, axle load adjustment mounted on the first axle, reversing camera, low-bed length 5,500 mm, loading height 850 mm, low-bed depth 600 mm, wheel recesses 450 mm, hot-dip galvanizing, hydraulic lateral movement of the ramps (length 4,800 mm), remote control (steering functions), wheel recesses for wheelbases of 3,300 - 3,800 mm, excavator recess/crane clearance approximately 3,500 mm long with 3 pairs of pivoting lashing eyes, each rated at 10,000 daN, 2 pairs of lashing eyes, 5,000 daN, embedded in the outer frame of the rear chassis platform, 6 pairs of pivoting lashing eyes, 10,000 daN, installed in the outer frame of the low-bed platform (2 pairs in the outer frame of the chassis platform, and 4 pairs in the outer frame of the detachable driving surface of the low-bed platform). 1 pair of pivoting lashing eyes, 13,400 daN, installed next to the central box frame on the left/right side in front of the first axle (in front of the detachable driving surface), 1 pair of pivoting lashing eyes, 10,000 daN, in the front fixed support, welded into the open outer frame, 1 pair of pivoting lashing eyes, 13,400 daN, welded into the curvature to the low-bed on the main frame, 3 m spread, factory equipment. Iiodpfszhalysx Ahyjh Data subject to change, subject to availability, as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height, loaded: 950 -> 1050 mm Rear overhang: 2,300 mm Iedpfog Sk Tvox Ahyjih Extendable by: 3,400 mm Wheelbase: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading area: Extendable loading platform with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings, foldable outwards (LC 5,000 daN). 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t Load capacity (50t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). The trailing axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80 kg) Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color, in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories Yellow-red air couplings on the galvanized connection strip at the front. 2 chocks with holders. 2" King Pin A galvanized steel front panel approx. 2200 mm high. (± 105 kg) EN12642-XL Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) at the rear of the trailer. Loading area with approximately 38 mm thick hardwood floor. (± 320 kg) 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform. (± 30 kg) 1 spare wheel holder under the loading platform on the right side, in the direction of travel. Tires 435/50 R 19.5, at the manufacturer's choice. One mudflap at the rear of the trailer. Manual and description on a USB stick. One mounting for a rotating beacon at the rear of the trailer. On the swan neck and at the rear panel, left and right, one mounting each for warning signs including socket. One INOX tool box transversely under the loading platform (1000x400x2500) (± 135 kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90 kg) 4 pairs of WADER container locks. (± 60 kg) 10 pairs of galvanized plug-in rails approx. 100 x 50 mm, 1,000 mm high. (± 220 kg) 3 pairs of pocket rail strips, mounted transversely in the loading area, for plug-in rails 100 x 50 mm. (± 95 kg) S

Condition: new, empty load weight: 10,400 kg, maximum load weight: 45,600 kg, overall weight: 56,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17.5, color: green, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, ABS (anti-lock braking system), extendable to 3m, hydraulic ramps, rear support, supports. Iiedpfow Rf N Dox Ahysh Body: 3-axle low-loader trailer with hydraulic loading ramps, 3 x 12t axles, drum brakes, loading height approx. 1030 mm, extendable to 3m, hydraulic ramps operated via its own electric pump! Independent hydraulic pump with electric motor, independent from the tractor unit, gooseneck length approx. 4m, low bed length approx. 8.6m! New vehicle from stock! EU type approval currently under review! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, empty load weight: 11,945 kg, maximum load weight: 36,055 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 01/2024, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: orange, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41742 Faymonville, Platform trailer * Year of manufacture: 2024 * ABS, Anti-lock Braking System * Air suspension * Steerable axle * Rear-steering axle * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Lifting and lowering device * Telescopic – telescopic drawbar * Hydraulic ramps * Suspension: Air * Gross vehicle weight: 48,000 kg Iiodpfx Ahsz Enqpjyjh * Tare weight: 11,945 kg * Payload: 36,055 kg * Permissible gross vehicle weight: 48,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 40% -- 40% - Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Loading area: 9300 mm + 4500 mm extension * Ramp length: 4200 mm * Hydraulic ramps, foldable and adjustable to the side * Wheel arch * Extendable * Overwidth signs * Container locking mechanism * Aluminum support legs Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive services include, for example: * Purchase/sale/rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 12/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 68575 Nooteboom, Euro specification * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF% * Tyre condition 1st axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre condition 2nd axle: 40% -- 40% | Tyre size: 235/75 R17.5 * Tyre condition 3rd axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre sizes: 235/75 R17.5 * Manufacturer: ES-GE * 3rd axle: hydraulically forced-steered * Telescopic extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Isdsyibz Repfx Ahyjih Disclaimer: Specifications are subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and hassle-free financing options * Application for all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TüV approvals, registration service * Transfer of commercial vehicles Feel free to contact our trained specialist staff for professional advice.