Used Tecnokar Supertop F1 6900 28 M Nuovo Di Fabbrica for sale (75,007)

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 06/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine Pgedpfsy R Ipnjx Af Set * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: good (used), Year of construction: 2018, operating hours: 983 h, fuel type: diesel, Skyjack SJ 6826RT Scissor Lift 10 m / Scissor / Work Platform 2018 4X4 Kubota Diesel Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) Pjdpfx Afjywu Nue Ssgt For viewings and/or test drives, you can make an appointment without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2475818, power: 36.4 kW (49.49 HP), platform length: 1,830 mm, platform width: 910 mm, overall weight: 13,150 kg, transport length: 10,880 mm, transport width: 2,490 mm, transport height: 2,570 mm, fuel type: diesel, color: orange, Equipment: UVV, Technical data Year of manufacture: 2020 Engine: Diesel, 36.4 kW Working height: 22.31 m Platform height: 20.31 m Outreach: 17.30 m Slew range: 360° Platform dimensions (L x W): 1.83 m x 0.91 m Overall dimensions (L x W x H): 10.88 m x 2.49 m x 2.57 m Travel speed: 6.8 km/h Max. load capacity: 230 kg Max. climbing ability: 30° (4x2x2) Pgodpfx Afsyw H U Nj Sjt Max. climbing ability: 45° (4x4x2) Weight: 13,150 kg Fully functional, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2473678, power: 44.5 kW (60.50 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 19,380 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 10,200 kg, transport length: 9,140 mm, transport width: 2,440 mm, transport height: 2,540 mm, fuel type: diesel, tire size: 10,5x17,5, color: red, Equipment: all wheel drive, differential lock, Technical data: Pjdpfx Afeyykvco Sogt Year of manufacture: 2019 Working height: 21.38 m Platform height: 19.38 m Lateral outreach: 12.19 m Up-and-over clearance: 8.38 m Slewing range: 360° Basket arm length: 1.68 m Platform dimensions (L x W): 1.83 x 0.91 m Overall dimensions (L x W x H): 9.14 m x 2.44 m x 2.54 m Load capacity: 227 kg Total weight: 10,200 kg Drive: Diesel 44.5 kW/60 HP Climbing capacity: 45% Platform rotation: 170° Foam-filled rough-terrain tires All-wheel drive, differential lock, overload sensors, fully functional, standard signs of use.

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Pgjdpfx Afjyltwfj Sot Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone at ...). Seppi M. MIDI-KASTOR / 5–15 t / Stump Grinder / NEW / In stock & available immediately Price: €15,290.00 net / €18,195.10 gross - Cutter disc width: 0.10 m - Cutter disc diameter: 0.60 m - Total width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator mounting - For the removal of stumps and tree roots - Grinds stumps and roots up to 30 cm deep - Suitable for excavators from 5 to 15 t - For mounting on various adapter plates - Drive designed for hydraulic motor, dependent on carrier machine flow rate - Indirect V-belt drive with 5 V-belts - Double chain protection - Rotor equipped with 32 fixed carbide-tipped tools - Colour: Red RAL3020 · Anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min–max): 200 – 350 - Required hydraulic flow rate in l/min (min–max): 70 – 100 Optional: MS08 adapter plate incl. bolts and installation = €750.00 net For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drain. The device is supplied without hoses, connectors, or adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse carries a wide range of Seppi M. products, all available for immediate delivery! Pgedeyl Hggopfx Af Sst Please contact us at ... for more information. We are also happy to prepare a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: used, mileage: 1 km, first registration: 01/2023, wheelbase: 3,250 mm, color: white, gearing type: mechanical, emission class: euro6, PIAGGIO NP6 LPG, DUAL-WHEEL VERSION, 325 TOP LOADING CAPACITY: 4 PALLETS VAN EXTERNAL LENGTH: 3200 EXTERNAL WIDTH: 1800 INTERNAL HEIGHT: 1700 TUBULAR CHASSIS 18MM MULTI-LAYER FLOOR DUAL REAR DOOR WITH A SINGLE RECESSED HANDLE NEW, AVAILABLE FOR IMMEDIATE DELIVERY, READY FOR REGISTRATION... AT OTHER LOCATIONS OF OUR GROUP, WE ARE AN OFFICIAL MERCEDES-BENZ DEALER. TRUCK, NAPLES BRANCH (NA) DOMENICO ESPOSITO, EBOLI BRANCH (SA) OFFICIAL FORD TRUCK DEALER, DOMENICO TRUCK SRL MARCIANISE BRANCH (CE) NAPLES BRANCH (NA) EBOLI BRANCH (SA) AND OFFICIAL PIAGGIO COMMERCIAL DEALER, DOMENICO ESPOSITO. WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM MULTIPLE BRANDS (FIAT, HYUNDAI, DAF, MERCEDES-BENZ, RENAULT, PEUGEOT, IVECO, MITSUBISHI, SCANIA, MAN, NISSAN, ISUZU, FIXED PLATFORM, CRANE, DUMP TRUCK, CURTAIN-SIDED, BOX, TAIL LIFT, REFRIGERATED VEHICLE, INSULATED WITH REFRIGERATION UNIT, VAN). - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. TEL. 0- OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM, SATURDAY 8:30 AM/2:00 PM. Psdohy Syropfx Af Ssgt

Condition: ready for operation (used), Siemens 1FT5046-1AF71-3EA0 permanent magnet motor SN EF186446105001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Podpfxjl Syhge Af Sogt

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #549 Mercedes Benz Arocs 2848 6x2 with Combined High-Pressure Jetting and Suction/Pressure ADR Tank Body Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2848 6x2, equipped with a combined KROLL high-pressure jetting and suction/pressure tank body, is a NEW vehicle featuring ADR L4BH, VacuStar 1600, Uraca KD 718, telescopic boom DN125, and a hose cassette. A premium, ready-for-use vehicle for demanding sewer, industrial, and hazardous material applications. Body • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • Hose cassette with telescopic boom DN 125 • Reach (pivot side): 5,200 mm • Tank material: S355J2+N (St 52.3) • ADR suction/pressure tank Type K 14.0 / 28 PE • Telescopic piston with 3 locking positions • Capability to suction from open water ("comfort version") via cassette boom with integrated filter • Tanker equipped per ADR – class type AT/FL L4BH • Discharge by pneumatically operated piston • Sludge water drain DN 80 for backflushing via the boom Vacuum system • CVS VacuStar 1600 – approx. 1,550 m³/h at 400 mbar • Hose cassette with telescopic boom DN 125 • Reach (pivot side): 5,200 mm • Additional suction hose reel with through-passage, right rear, approx. 30 m DN80 High-pressure system • Uraca KD 718 – approx. 315 l/min at 170 bar • Large high-pressure hose reel for 240 m DN 25, swivels 180° • Supplied with 160 m DN 25 • Small high-pressure hose reel for 80 m DN 13, hydraulic • Supplied with 80 m DN 13 Special Features • Hose storage cassette with telescopic boom DN 125 • Continuous height adjustment of suction hose (hydraulic, trolley-guided) • Boom arm hydraulic, telescopic, swivels 180° • ADR L4BH, incl. EX/II, EX/III and AT • Spray gun • LED beacon • LED perimeter lighting • Remote-control operation of working functions via CAN-BUS • Radio remote control with 14 functions • Hot water hand-wash unit • Large locker at rear left (e.g., for push camera) • Reversing camera • Soundproofing of the pump compartment • Toolbox • Holder for traffic cones • Vise • Ladder • Advertising boards on both sides approx. 3,000 × 600 mm Special Equipment • Axle load measuring device • Front axle: 9.0 t • Digital radio DAB/DAB+ • ADR equipment package • Right-hand exterior mirror with maneuvering position Podpfx Afoxc Sy Ee Segt • 220 Ah battery • Interactive multimedia cockpit • 24V / 100A electrical pre-wiring in cab • Main beam assistant & cornering light • Traffic sign recognition • Movable cab entry • Front springs: 9.0 t / 4 leaf • Tinted windscreen with band filter • ADR Type FL – speed limiter system • 16-speed gearbox G 280-16 • Gearbox lock (independent of gearbox) • Rear axle crown wheel 300 • 3-piece mudguards with splash protection • 430 l aluminum fuel tank (right) • Cooling box / refrigerator • Reinforced engine brake • Tag axle: 9 t, steered, liftable • Navigation system • PTO – smooth flange • PTO gearbox-independent & clutch-dependent MB 1.65 • Programmable special module • Rear overhang 1,650 mm • Smoker package – rain sensor • Tire pressure monitoring system • Reverse warning (audible) & hazard warning lights • Two additional remote keys • Circuit breaker • Comfort suspension seats for driver & co-driver • Armrest

Condition: used, mileage: 92,811 km, power: 130 kW (176.75 HP), first registration: 03/2021, fuel type: diesel, overall weight: 7,490 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 2, loading space volume: 21 m³, loading space length: 4,480 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, Year of construction: 2021, Equipment: ABS, electronic stability program (ESP), soot filter, ATEGO 818 L Beverage Truck 4.40 m with ZAA-Towing Hitch * Rear axle differential lock * Loading edge height at the front approx. 1 m / rear approx. 1.08 m * Vehicle No. for customer inquiries: 4122 * Active Brake Assist * Differential lock, rear axle * Engine version EURO VI, D * Lane Keeping Assist * Tow hitch G 135, for ZAA * Ringfeder trailer coupling * High Performance Engine Brake * Rear axle air suspension * Rain/light sensor * Stability Control Assistant (ESP) * 2-line trailer brake * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electric window lifts, both sides * Transmission G 71-6/9.20-1.0 * Mercedes PowerShift 3 * Particulate filter * Transparent exterior sun visor * Cruise control * Low storage tray on engine tunnel * 25L AdBlue tank * 24V, 15-pin trailer socket * Roof hatch/ventilation flap * Main mirror, electric, driver's side * Heating, electronic air supply unit * Fuel pre-heating * 120L plastic tank, left side * Engine OM934, R4, 5.1L, 130 kW (177 HP), 750 Nm * Wheelbase 3320 mm * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer under frame, rear axle * Toll pre-equipping * Digital tachograph, 2nd generation Pedpfxjvg Tqwj Af Ssgt * Green environmental badge * Two-seater * Full service history * Weight variant 7.49 t (3.6/4.6) * Crossmember, retrofitted for G135 ZAA tow hitch * Tubeless tires, 235/75 R 17.5 VA * 2/3-door configuration No liability for printing or typographical errors. Sale to businesses only. Subject to prior sale and changes. Modifications, prior sale, and errors are expressly reserved. The description is for identification purposes and does not constitute or guarantee characteristics under sales law. The purchase contract description is binding. * TOP SERVICE + QUALITY * We can provide you with a LEASING/FINANCE/HIRE PURCHASE offer * Guarantee insurance available on request from the insurer * TÜV / UVV tail lift / tachograph check and OBU installation can be arranged via our local partners * 30-day export license plates available * All export documents possible upon individual request * Toll-Collect can be booked in house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit our website at * Over 200 vehicles in stock at all times

Condition: used, power capacity 15 kW volt 380 V Pedpfx Afovttcts Sjgt ampere 28 A weight of the machine ca. 84 kg

Condition: new, machine/vehicle number: 1, empty load weight: 11,000 kg, maximum load weight: 28,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 870 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2020, Equipment: ABS, New Ceylon semi-trailer, ready for registration. Features include: 3 axles, with the first axle liftable and the third axle steering; EBS; double-sided electro-hydraulic ramps; extendable sides; winch preparation; low-level height of 87 cm; length of 9.95 m; overall length of 13.65 m; and Rud couplings. Immediate delivery, subject to availability. Guaranteed. CONCESSIONARIO INTERDRIVE SRL - PARMA. Pgodeh S Aw Ropfx Af Sot

Condition: reconditioned (used), modernized machine with new StoreControl L control system Control system expansion optionally available 5 of the originally 6 identical machines still available External dimensions: Overall height 6,900 mm Overall width 1,580 mm Overall depth 2,680 mm 80 carriers, each with a payload of 250 kg in the clear internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the opening at 860 mm above floor level, then 1000 mm high Color: Gray / Dark Gray, carriers hot-dip galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.25 kW / 400 Volt Pgjdsrvkq Ejpfx Af Sot Additional extras: Lift door, manually operated Subject to errors, technical changes, and minor deviations in the photos Photos of identical machines Delivery and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder Podpfsrv Avrjx Af Sjgt -Quick-change chuck: Recording: MK3 / 28 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 58 x 190 mm -Weight: 1.1 kg

Condition: good (used), Digital input device, Interbus Pedpfxsb A Nufj Af Sogt -IBS Rl 24 Di 16/8-LK-2MBD -Weight: 1.5 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28/85 mm Pgjdpeb A Stcefx Af Set Price: per piece -Quantity: 16x Available -Weight: 1.2 kg/piece

Condition: good (used), Digging bucket, excavator bucket, demolition bucket, trenching bucket Pgodpfx Afsb A I Ite Set -Design: stable -Width: 280 mm -Height: 750 mm -Depth: 1000 mm -Intermediate dimension: 290 mm -Hole diameter: Ø 60 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 340 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 28 mm -Dimensions: see photo technical. drawing Pgedpfx Ajrhmnhjf Set -Total dimensions: 104/110/H83 mm -Total weight: 5.2 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Pedpfjq Ei D Rjx Af Sogt -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 28 mm -Dimensions: see photo techn. drawing -Total dimensions: 115/85/H75 mm -Total weight: 3,7 kg

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck Podjqwqiaopfx Af Ssgt • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Condition: ready for operation (used), Grundfos MG 112 MS 2-28 FT 136-C three-phase motor SN 1100029148, used, minor signs of wear, 100% functional, scope of delivery as per photos Pgedpfx Afoqyq Nqe Sjt

Condition: good (used), Hydraulic valve, pressure valve, filling valve, pre-fill valve -Manufacturer: Rexroth, Filling valve type ZSF 160 FO-1-14/M/01 -Classification: NG160ZSF-160F1-1 -Nominal size: 160, A B, mechanically operated -Connections: G 1 1/4" / G1/2" -Individual components: see photos -Overall dimensions: 470/310/280 mm Psdpfxst Ultij Af Sogt -Weight: 49 kg

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Podpfouf Sv Dex Af Ssgt Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: with tilting function, without hydraulic unit -Speed: 14 m/min Pgedjuhr S Depfx Af Sot -Roller width: 1200 mm -Roller diameter: 110 mm -Axle spacing: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Overall dimensions: 3100/2300/H2000 mm -Weight: 1180 kg

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) Pgedpoga Nh Hsfx Af Sst 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.