Used Technica 5100 for sale (297)

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R glue spreader - 1300 mm - NEW MACHINE - Loader from glue spreader onto conveyor - Infeed conveyor, length 6000 mm x width 950 mm, motorized - ORMA hydraulic flat press 5100x1400 mm – 12 cylinders, hot water heating plates, refurbished - Outfeed conveyor, length 6000 mm x width 950 mm, motorized This press requires medium to high pressure to ensure the panels are 100% flat. Panel size: 5100 x 1400 mm (solid drilled steel plates) Daylight opening: 180 mm Full surface pressure: up to 10 kg/cm² Number of hydraulic cylinders: 12 units – cylinder diameter 140 mm MYLAR Teflon film on the plates Preparation for hot water plate heating – boiler not included Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine is fully refurbished, calibrated, and tested. Price: €55,000 excl. VAT, without OSAMA glue spreader Kdodpovva Sysfx Aa Eop Price: €62,000 excl. VAT, including OSAMA glue spreader

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Ksdpfx Aaevdu N Ae Ejdp

Condition: used, functionality: fully functional, machine/vehicle number: 995340, Year of construction: 2018, operating hours: 2,255 h, load capacity: 3,500 kg, lifting height: 11,050 mm, fuel type: diesel, construction height: 2,420 mm, power: 75 kW (101.97 HP), drive type: Diesel, Rigid Telescopic Handler Chassis number: 995340 Load centre: 500 Speed class: 20 Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: pneumatic Front tyre size: 440/80-24 Front tyre condition: 60-80% Rear tyre type: pneumatic Rear tyre size: 400/80-24 Rear tyre condition: 60-80% Kedpfx Aoya Rggsa Ejdp Description: Rotating beacon, reverse alarm, rear license plate lighting. Bucket. 3rd hydraulic valve, rear work light, front work light, heater, STVZO, full cab, operator's manual, inspection booklet, declaration of conformity.

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) Ksdsxal A Ujpfx Aa Eodp + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: new, Year of construction: 2025, Capping Module to press caps onto containers. - Stainless Steel version (SS304); max. speed of the machine in neutral: 120 cycles/minute; cap diameter: 15-100mm; container/bottle diameter: 35-140mm; container/bottle height: 50-300mm; 220V, 2.7kW; machine dimensions: L2800xW900xH1880mm; weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kdjdpfov Nk T Uex Aa Eep

Condition: used, mileage: 393,247 km, power: 185 kW (251.53 HP), first registration: 06/2016, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), soot filter, tail-lift, Iveco Eurocargo 140E25 Curtain Side / Tarpaulin / Tail Lift, 2nd owner, demonstration vehicle from Iveco, full service history, new vehicle inspection (HU) valid until 09/2026, safety inspection (SP) valid until 03/2026 Wheelbase: 5175 mm, AdBlue tank: 30 L, without ADR compliance Kdjdsxav Dcspfx Aa Eep Equipment: Tow coupling, 40 mm, 120 kN, C-profile steel ladder chassis, standard rear overhang, Standard exhaust outlet positioned center, Batteries: 170 Ah, Tyres: 285/70 R 19.5 road, Standard day cab, flat roof, cab roof spoiler in cab color, standard component positioning Alternator: 2160 W (24V x 90A), rear axle ratio i = 3.73,Fuel tank: 200L plastic, Steel air reservoirs, Air filter unit under cab, Air compressor: 360 ccm No engine PTO, no rear PTO, spare wheel, spare wheel mount on side, NO retarder, standard configuration Mirrors for 2600mm body width, Emissions standard: Euro VI 2014 OBD II, ABS, ASR, and ESP Towing and maneuvering eye at front, Iveco axle registration 'stretta', weight variant: 5100/9500 kg, emergency brake assist (AEBS), no driver airbag, automatic seat belts, left-hand drive for right-hand traffic, standard gross vehicle weight, no sump guard Tow coupling manufacturer: Rockinger, 24V 15-pin trailer socket, no additional trailer socket, trailer version, moderate climate version Right armrest on driver’s seat, electrically adjustable and heated mirrors, no sleeper bunk, battery charged, comfort co-driver bench seat, twin rear wheels, hill start assist (Hill Holder), on-board tools MS10-144, no COC specification, general operating permit, no roof hatch, no FMS-VDI interface Rear axle differential lock, air connection, EC 2 Euro VI MY15 documentation, no engine power reduction, digital EU control unit 1T/2F, first aid kit, driver's cab attachments in black, cab rear wall without window, luxury driver’s seat, lane departure warning system, etc. Appointments and test drives available by prior telephone arrangement. The details provided online are non-binding descriptions and do not constitute guaranteed characteristics. The seller does not accept liability for typing or data transmission errors. Subject to error and prior sale. ----

Condition: new, Year of construction: 2026, Laser power: 6000 Watt Working range laser: 3050 x 1550 x 270 mm positioning speed X/Y/Z: 90 m / min simultanious: 120 m / min Ksdpfx Aaoxq Rczs Esdp Max. workpiece weight: 1000 kg Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. copper: 8 mm Max. brass: 14 mm Length: 10050 mm Width: 5100 mm Height: 2600 mm Machine weight: 8100 kg Electrical connected load: 54 kW

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Kdedpfxedyynvj Aa Ejp Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar Ksdpfoffamvsx Aa Eodp closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 10 h, Kilia 65 Liter Meister Plus Vario Condition: Factory Refurbished Warranty: 6 months manufacturer's warranty Manufacturer: Kilia General Description The Kilia 65 L Meister Plus Vario is a high-performance universal chopper for the production of fine and coarse sausages, emulsions, as well as vegetarian and vegan products. The machine is made entirely of stainless steel and meets the highest hygienic and technical standards. By using modern, energy-saving frequency converters in the drive technology, the machine enables precise control of the speeds while simultaneously reducing energy consumption – ideal for economical and sustainable production. Equipment, Knife Head: Kdedezcuzmspfx Aa Eep 6 knives Equipment, Chopper: Infinitely adjustable knife shaft drive: Forward: 50–5100 RPM Reverse (mixing mode): 50–500 RPM Bowl drive: 7–20 RPM Electronic central lubrication for knife and plate shaft bearings Noise protection cover and knife cover, manually operated, stainless steel Electric knife shaft brake Temperature-dependent end switch Cycle counter-dependent end switch Operation: Touch display with splash guard Operation: Button panel Drive power, knife shaft: 22 kW, 400 V (frequency converter controlled) Drive power, bowl: 1.5 kW, 400 V (frequency converter controlled) Integrated online service module for remote maintenance Dimensions and Weights Weight: 850 kg Dimensions: Diameter 1150 mm, Height 1160 mm, Height with knife cover open 1510 mm Scope of Delivery Kilia 65 L Meister Plus Vario – New Machine Standard Accessories: Wrench for knife head, cleaning brush, scraper Technical documentation

Condition: used, Year of construction: 2019, load capacity: 18,000 kg, lifting height: 9,630 mm, - Max. Tragkraft 18000 kg - Schwerpunkt der Last 600 mm - Max. Hubhöhe 9.63 m - Max. Reichweite 5.56 m - Neigungswinkel nach unten 105 ° - Neigungswinkel nach oben 12 ° - Äußerer Wenderadius (über Reifen) 5.5 m - Äußerer Wenderadius (mit Gabeln) 6.15 m - Niveauausgleich Regler 10 ° - Motornorm Stage IV / Tier 4 Final - Motor Modell OM 934 LA. E4-3 - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 5100 cm³ - Nennleistung Verbrennungsmotor / Leistung (kW) 176 Hp / 129 kW - Max. Drehmoment / Motordrehzahl 750 Nm@1600 rpm - Kühlsystem des Motors Wasser - Number of batteries 2 - Batterie / Batteriekapazität 12 V / 120 Ah - Zugkraft 15970 daN - Typ Hydrostatisch - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 25 km/h - Feststellbremse Automatische negative Handbremse - Betriebsbremse Hydraulik - Steigfähigkeit - beladen 37 % - Pumpenart Verstellpumpe - Hydraulikfluss - Hydraulikdruck 205 l/min - 350 Bar Ksdpfxjzlk Sxo Aa Eedp - Motoröl 21 l - Hydrauliköl 290 l - Kapazität des Kraftstoffbehälters 315 l - Abgasnachbehandlung für Diesel (Typ AdBlue®) 63 l - Innenschallpegel (lpa) 80 dB(A) - Umgebungsgeräusch (LwA) 107 dB(A) - Vibrationswert an Händen/Armen < 2.5 m/s² - Sicherheit Zulassung der Kabine ROPS - FOPS cab (level 2) - Steuerungen JSM

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Kdedpszc N Ihefx Aa Eep Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Kdedpjv Hm A Tefx Aa Eop Automatic wire positioning is available on the key cutting stations: -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Kjdpjzl Ddnjfx Aa Ejdp Price: on request contact: Mr. Ralf Schulz

Condition: used, mileage: 480,600 km, power: 302 kW (410.61 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 13,500 kg, maximum load weight: 18,500 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 5,100 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, loading space length: 6,200 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, Iveco Trakker AD340T41 8x4 Tipper First registered: 10/2009 480,600 km Euro 5 emissions standard Short cab Kdsdpfszk E Urex Aa Ejp Automatic transmission Air conditioning 8x4 axle configuration Leaf spring suspension Wheelbase 5100 mm Tires 385/65 R22.5, tread depth approx. 90% Tires 315/80 R22.5, tread depth approx. 50% Tipper body 6.20 m Side boards 800 mm Unladen weight 13,500 kg Export/net price: 26,900 Euros All information without guarantee, subject to change.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: Kdjdpfxezh Eh To Aa Ejp • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Working width: 2540 mm Bending capacity (St42): 4.5 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 30 mm Hydraulic motor drive power: 5.5 kW Weight, approx.: 5100 kg Dimensions LxWxH, approx.: 3900 x 1700 x 1900 mm Model description: Kodpfxop Eb Dkj Aa Esdp - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Kdsdpfxjyl Ubfs Aa Ejp Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: KR 210 R2700 prime, Basic data KR 210 R2700 prime Number of axes: 6 Number of controlled axes: 6 Working envelope volume: 55 m³ Pose repeatability (ISO 9283): ± 0.06 mm Approximate weight: 1111 kg Rated payload: 210 kg Maximum reach: 2696 mm Protection rating: IP65 Protection rating, in-line wrist: IP65 Noise level: < 75 dB (A) Mounting position: Floor Footprint: 830 mm x 830 mm Permissible angle of inclination: ≤ 5° Default color: Base frame black (RAL 9005); Moving parts KUKA orange 2567 Controller: KR C4 Transformation name KR C4: KR210R2700 PRIME C4 FLR Hollow shaft diameter: A1 139 mm (partially occupied by motor cables) Humidity class (EN 60204): - Environmental condition classification (EN 60721-3-3): 3K3 Ambient temperature: Kjdpeyl Ux Defx Aa Eodp Operation: 10°C to 55°C (283 K to 328 K) Storage/transport: -40°C to 60°C (233 K to 333 K) Axis data, KR 210 R2700 prime Motion range: A1: ±185° A2: -140° / -5° A3: -120° / 155° A4: ±350° A5: ±122.5° A6: ±350° Speed with rated payload: A1: 105°/s A2: 107°/s A3: 114°/s A4: 136°/s A5: 129°/s A6: 206°/s Payloads, KR 210 R2700 prime Rated payload: 210 kg Rated mass moment of inertia: 105 kgm² Rated total load: - Rated supplementary load (base frame): - Maximum supplementary load (base frame): - Rated supplementary load (rotating column): - Maximum supplementary load (rotating column): 300 kg Rated supplementary load (link arm): - Maximum supplementary load (link arm): 130 kg Rated supplementary load (arm): 50 kg Maximum supplementary load (arm): 150 kg Nominal distance to load center of gravity: Lxy: 270 mm Lz: 240 mm Exceeding the specified payloads and supplementary loads will reduce the service life of the robot and can overload the motors and gears. It is recommended to always test your specific application with KUKA.Load. If any individual value is exceeded, please consult KUKA Roboter GmbH.

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Ksdpoyly R Eefx Aa Esdp Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Laying Machine TLMX - 112, TAJIMA ELECTRONIC LAYING MACHINE STITCHING FIELD: 1000 mm x 375 or 400 mm W-MACHINE: Deactivate every second head. Stitching width on 6 heads: 750 mm HEADS: 12 laying heads / 6 laying heads in double width NEEDLES: 12 HOOK UNDER THREAD: Jumbo (enlarged bobbin with 1/3 higher under thread capacity) DISPLAY: 6.5" color display INSULATION: Standard dust protection TOOLS: Standard maintenance toolkit ACCESSORIES: Standard production accessories NEEDLES: Standard needles included INSTALLATION: 4 days included TWELVE WIRE FEEDING DEVICES Tube guidance for feeding 360° rotation, limited Supports wire bobbins up to 15 kg PREPARED FOR LEFT-RIGHT AFC Front table: extended X-drive: extended Automatic Frame Changer: pneumatic FABRIC ROLL STANDS: left and right - Left: automatic fabric unwinding - Right: semi-automatic fabric winding FABRIC CLAMP: Front and back only MOVEMENT: X-axis mobility WIRE CUTTER (12 sets) - Pneumatic cutting system - Main beam-mounted, fixed cutting position AUTOMATIC UNDER BOBBIN CHANGER (UBC) (12 sets) - Automatic under bobbin change - Bobbin changer located directly in front of the machine table—no need to access under the machine SOFTWARE WIRE LAYER - BASE: Adobe Illustrator - IMPORT: Vector data import functionality - FUNCTION: Automatic stitch file generation using vector data (Online training included) NEEDLE DETECTION DEVICE (12 sets) - Machine halts if a needle contacts wire (requires special wire spools) - Indicator light on head signals contact Kedeylxqqspfx Aa Esdp

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) Kdsdszhwx Dopfx Aa Ejp • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), cutting length (max.): 3,020 mm, Cutting length (max.) 3020 mm Kodpozkm Tcefx Aa Eedp Checked, functional More photos and videos available upon request. Cutting height 0-50 mm Opening height 80 mm Saw motor 4 kW Circular saw blade speed 9000 rpm Height of the planing head 50 mm Three-phase motor 1.5 kW Spindle drive, spindle speed 10,000 rpm Overall length: 5100 mm

Condition: used, power: 40 kW (54.38 HP), color: other, lifting height: 57,000 mm, Year of construction: 2023, Empty weight: 5.100 kg Dimensions (LxBxH): 410 x 180 x 190 cm Lifting capacity: 2.600 kg Number of keys: 1 Serial number: ZNVMLC190PXE06719 Chassis number: ZNVMLC190PXE06719 Documents: yes (available from the seller) Kedpfxszki Dqo Aa Eodp Key: yes Engine: Kubota Engine power (kW): 55 kW Hour meter reading: 30 Tire type: pneumatic tires Tire size: 12/75-18 PR12MPT 552 Camso Four-wheel drive: yes Fork carriage: yes Bucket length: 1200 mm Lifting capacity: 2600 Kg Maximum lift height: 5700 MM Equipped with: fork carriage Overall dimensions: 4100x1800x1900 mm Curb weight: 5100 Kg Max speed: 30 km/h Radio with USB and Bluetooth Equipped with LED lights Rearview mirror Air-suspension seat Wheel alignment indicator Comfort cab kit Arm suspension Semi-automatic air conditioning Reversible fan Condition: unused Online auction of construction, agricultural and industrial machinery (including. mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders and skid steer loaders, aerial platforms, trucks, mobile compressors, power generators, rollers, scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Wednesday 8 July and closes Wednesday 22 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 July Pickup days are on: - Tuesday 28 July - Thursday 30 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2013, We offer a used KROMA GUTMASTER 1200 mackerel gutting and injecting line from 2013. This industrial processing line is designed for the automatic gutting, cleaning, waste extraction, and brine injection of mackerel in fish processing plants. The machine is suitable for fish weighing 200–500 g and combines several operations in one continuous workflow. The fish is manually placed in special conveyor pockets, head-first and belly-up. As it moves through the line, the machine measures the fish and automatically adjusts the knives to its size. The system opens the belly, separates the gills, removes the entrails using the VACMASTER 200 vacuum system, cleans the inside of the fish, removes kidney blood, and then transfers the product to the brine injection section. The line is equipped with the BRINEMASTER automatic brining module, located directly after the cleaning section. A special injection head with 50 needles, each 2 mm in diameter, injects brine into the fish. After brining, the product is transported by conveyor to an inspection table or directly into containers. The KROMA GUTMASTER 1200 is made of acid-resistant materials and AISI 304 stainless steel, ensuring durability, hygiene, and resistance to demanding production environments. The machine is also equipped with CIP and CWS cleaning systems, helping to reduce cleaning time and improve sanitary working conditions. If there is no fish in a conveyor pocket, the working units are automatically deactivated, which reduces wear and energy consumption. Technical specifications: Manufacturer: KROMA Model: GUTMASTER 1200 Year of manufacture: 2013 Application: mackerel gutting, cleaning, and brine injection Fish size: 200–500 g Capacity without brine injection: up to 50 pcs/min Capacity with brine injection: up to 35 pcs/min Total power: 8 kW Kjdpfozkizvjx Aa Esdp Control: microprocessor-based PLC Vacmaster 200: automatic vacuum gut-removal system Brinemaster: 50 needles, 2 mm diameter Outfeed conveyor: yes CWS cleaning system: yes CIP cleaning system: yes Basic spare parts kit: included in the price Operating staff: 2–3 people Weight: approx. 1000 kg Dimensions: 5100 / 6100 mm with conveyor x 600 x 1600 mm Main advantages: automatic gutting, cleaning, and brine injection in one line, high capacity of up to 50 fish/min without brining and up to 35 fish/min with brining, suitable for mackerel weighing 200–500 g, VACMASTER 200 vacuum system for entrail removal, BRINEMASTER brine injector with 50 needles, stainless steel and acid-resistant construction, CIP and CWS cleaning systems, PLC control, basic spare parts included in the machine price.