Used Technica 5100 for sale (292)

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. Lajdpfjz A Dxkox Albeh MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Year of construction: 1974, condition: excellent (used), Workpiece diameter max.: 150 mm workpiece length max.: 1100 mm center hole angle : 60 ° grinding spindle speed : 15'000 rpm Weight: approx. 460 kg dimensions W x D x H: approx. 700 x 800 x 1800 mm Accessories: see picture Lsdpfx Asf U Ev Ielbjah

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m Lodpfx Aloz N Dmvsbeah • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM Laedezytmzjpfx Alboh - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,200 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 29,800 W, overall weight: 5,443 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-28L features a chuck size of 12.0 in (305 mm) and a maximum part swing of 21.0 in (533 mm). It offers a maximum cutting length of 42.5 in (1080 mm) and a spindle power of 40.0 hp (29.8 kW). If you are looking to get high-quality turning capabilities, consider the HAAS ST-28L machine we have for sale. Contact us for further details. • Working hours: 0 (Showroom machine) Laedpfoz N Ergsx Alboh • Chuck size: 12.0 in (305 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BOT turret): 13.00 in (330 mm) • Max cutting diameter (with BMT65 turret): 11.75 in (298 mm) • Max cutting length: 42.5 in (1080 mm) • Bar capacity: 4.00 in (102 mm) • Rapids X/Z: 945 ipm (24.0 m/min) • Max thrust X: 4100 lbf (18238 N) • Max thrust Z: 5100 lbf (22686 N) • Spindle nose: A2-8 • Spindle torque (max): 425.0 ft-lbf @ 325 rpm (576.0 Nm @ 325 rpm) • Spindle bore: 4.62 in (117.3 mm) • Turret: 12-station BOT • Boring bar rear clearance: 4.00 in (102.0 mm) • Coolant capacity: 55 gal (208 L) • Air required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline air hose & coupler: 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Input AC voltage (3-phase): 220 VAC / 440 VAC • Full load amps (3-phase): 70 A (220 VAC) / 35 A (440 VAC) • Shipping dimensions: 190.0 x 90.0 x 90.0 in (483 x 229 x 229 cm) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, mileage: 730,000 km, power: 368 kW (500.34 HP), first registration: 06/2014, fuel type: diesel, maximum load weight: 6,740 kg, overall weight: 18,000 kg, tire size: 265/70r19.5, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: intarder, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: air, loading space length: 7,350 mm, loading space width: 2,550 mm, loading space height: 2,550 mm, Year of construction: 2014, Equipment: ABS, air conditioning, cable winch, car registration, compressor, cruise control, low noise, navigation system, onboard computer, parking heater, retarder, spoiler, tail-lift, traction control, IVECO STRALIS AS190S50/FP CM HI-WAY - Chassis WJMA1VUH60C287126 YearEURO 6 Mechanics: Cursor 13 - 12,900 cc - 500 hp - km 730,000 approx. Transmission EUROTRONIC + RETARDER Bodywork: Exterior \ full cab color green Tires: STRUCTURE: 5100 mm wheelbase - Cab bed \ high roof Active Space HI- WAY version. Front and rear air suspension Lodpfx Alsn Nxyqjbeah Total weight on the ground: 180 - Payload capacity: 67.40 TECHNICAL EQUIPMENT TRUCK: * to be verified upon arrival at our premises Cursor 13 engine - 500 hp - 12,900 Cc, Euro 6, Abs, Electronic Brake System, Brake Assist System, Iveconnect, Iveco Navigator, Differential Locking, Eurotronic 12as 2330 Td Transmission, Retarder Hydruaulic, Immobilizer, Automatic Climate Control, Independent Cabin Heater Ad Air, Adaptive Cruise Control, Hill Holder, Rear Suspension Pneumatic, Front Suspension Pneumatic, 790-Litre Increased Aluminum Fuel Tank, 135-Litre Blue Fuel Tank, Cabin Bed/High Roof - Hi-Way Active Space Version, Engine Brake With Retarder Function,Towable Version With Towing Bell, Power Steering, Electronic Speed Limiter, Central Locking, Alloy Wheels Alcoa, Electric Window Raiser, Portable Smoking Kit, Reclining High Comfort Sunbed, Sunroof Electrically Opening Glass Roof, Fog Lights, Removable Refrigerator, Electric Cabin Tilt, Pneumatic High Comfort Leather Driver Seat, Pneumatic and Heated Leather Passenger Seat, Electric And Heated Rearview Mirrors, Electric Front Blackout Curtain, Rolling Curtains On Doors, Matching Cabin Plastic Parts, Sun Visor EQUIPMENT: VAN - Useful interior dimensions approx. 7.35 * 2.50 h 2.55 HINGED TAILGATE Make: DAUTEL - Serial No.: 414219-001- Useful lifting capacity 20 Documents: Nationalized - Certificate of approval For viewing and road test contact Valerio Roscini at 339/3170008

Condition: used, Year of construction: 2014, Transnorm belt conveyor GF 5100-700-600 RA2105 Technical data: Conveyor length (NL): 5100 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): Frequency converter for stepless speed control Ljdpfspbiwyjx Albeah Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Lasdpfez Tzy Uex Albsh Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 1981, Dorries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 - Tool shank size : 40 x 40 - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 Lasdpfxokwcpxo Albsh - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: good (used), mileage: 252,249 km, power: 169 kW (229.78 HP), first registration: 10/2013, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 5,100 kg, permissible axle load (axle 2): 10,500 kg, loading space length: 7,600 mm, loading space width: 2,520 mm, loading space height: 2,690 mm, Year of construction: 2013, Equipment: ABS, AdBlue, electric window regulation, onboard computer, tail-lift, = Additional options and accessories = - Aluminum fuel tank - Leaf spring suspension - Cab = Notes = Mercedes Atego 1223 4x2 box truck with side doors - Load lift - Euro 6 - Low mileage - Automatic transmission Year of manufacture: 4-10-2013 Mileage: 252,250 WDB9670271L790921 Box dimensions: 760 - 252 - 269 Zepro load lift Box truck with side doors Euro 6 Automatic transmission Low mileage Lajdpfezl Rr Eex Alboh = Additional information = Tire size: 285/70R19.5 Front axle: Max. axle load: 5100 kg; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle: Double tires; Max. axle load: 10500 kg; Tire tread depth left (inner): 50%; Tire tread depth left (outer): 50%; Tire tread depth right (inner): 50%; Tire tread depth right (outer): 50%; Suspension: Air suspension Unladen weight: 8,164 kg Payload: 6,836 kg GVW: 15,000 kg Tail lift: Zepro, tailgate Technical condition: good Optical condition: good

Condition: used, Year of construction: 2012, Dust collector JP 300-L with briquetting press CS 3-12-R Laedpez Rrbkjfx Albsh Year of manufacture: 2012 Equipment: Dust collector Briquetting press Technical data: Vacumobil JP 300: Nominal volumetric flow rate: 5100 m3/h Maximum volumetric flow rate: 6000 m3/h Pressure difference at nominal volumetric flow rate: 2700 Pa Pressure difference at maximum volumetric flow rate: 2200 Pa Filter area: 28.0 m2 Suction nozzle: 300 mm Nozzle height: 1215 mm (center) Fan motor: 7.5 kW On-site fuse protection: 32 A Compressed air connection: 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 120 NL per pressure pulse with a pulse duration of 150 ms Sound pressure level: 75.0 dB Weight: 900 kg Briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m3/h (material-dependent) Hydraulic pump motor: 3.0 kW Mixer motor: 0.37 kW Metering screw motor: 0.75 kW On-site fuse protection: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Location: NRW (North Rhine-Westphalia) Availability: approx. June/July 2027

Condition: used, mileage: 57,919 km, power: 132 kW (179.47 HP), first registration: 08/2023, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, Total allowable weight: 7200kg Lajdpfx Aoz Hrkcjlbsh

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Ljdpfx Alszub Hrjbeah Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 Lodpfozh Eh Tox Alboah • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Laedpfx Aljtwzk Djbsh Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2023, pressure 320 t chamfer lenght 6050 mm distance between columns 5100 mm stroke 350 mm Laodszvq Eajpfx Albsh dayligth 650 mm total power requirement 30 kW weight of the machine ca. 22.500 kg dimensions of the machine ca. 7000x2300x3200 mm The machine is in like-new condition Accessories/Features: - ESA S 875 PC control system - 4 height-adjustable support arms in front of the machine - 2 manually adjustable stop fingers - Light barrier in front of the machine - Foot switch - Crowning - Side safety doors - Controlled axes: y1, y2, x, R, z1, z2 - 1 set of upper and lower tools - Machine in like-new condition

Condition: used, mileage: 165,400 km, power: 132 kW (179.47 HP), first registration: 07/2001, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro2, Year of construction: 2001, LICENSE PLATE: BR114LK TITLE: IVECO EUROCARGO 120E1S, SWAP BODY TRUCK, MULTI-BIN SYSTEM, FRONT AND REAR LEAF SPRING SUSPENSION REF: 26C57 Lasdpfx Alez Rq Uijbsh YEAR: 07/2001 HORSEPOWER: 180 ENGINE DISPLACEMENT: 5861 EURO STANDARD: 2 MILEAGE: 165380 TRANSMISSION: manual DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 3105 TOWING CAPACITY: no ORIGIN: Italy CAB: short and low NUMBER OF SEATS: 2 PAYLOAD: 5100 kg - GVW (GROSS VEHICLE WEIGHT): 11500 kg at full load - GVW + TRAILER: BODY TYPE: swap body, multi-bin system SWAP BODY MODEL: Isoli ADR: no OVERALL LENGTH: 5.93 m ACCESSORIES: - air conditioning - hydraulic lines for crane REFURBISHED: no INSPECTION VALID UNTIL: 11/17/2025 TIRES: 50% PRICE: 8,500.00 € + VAT. Errors and/or omissions excepted. The prices listed do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SWAP BODIES operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specializing in trucks, trailers, and swap body equipment. With a readily available fleet of over 50 trucks and over 150 swap bodies, containers with and without cranes. S.E.&O Given the number of advertisements and details provided, Aurora encourages you to verify the accuracy of the information with the sales staff.

Condition: good (used), mileage: 226,760 km, power: 169 kW (229.78 HP), first registration: 06/2014, fuel type: diesel, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: AdBlue, crane, differential lock, electric window regulation, trailer coupling, = Additional Options and Accessories = - Rear work light - Radio/CD player - Windshield = Notes = Internal inquiry number: 6-083 Used Mercedes-Benz Atego 1223 4x2 with a platform body and an ATLAS 65.2 loading crane at the rear. Includes ATLAS (HBC) remote control for the crane. From first owner!!! Immediately available!!! Laedpfszxqcqex Alboh Loading platform with plywood flooring. Loading platform dimensions: 5100 x 2270 x 800 mm Headboard at cab height with a grid for orientation, as the cab has a rear window. 45° outer frame with numerous lashing points. MOT valid until October 2026 Inspection valid until April 2026 Please refer to the attached images of the load chart for the load capacity of the loading crane. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Front axle: Steered Rear axle: Differential lock Unladen weight: 7,510 kg Payload: 4,480 kg GVW: 11,990 kg Crane: Atlas 65.2, mounted at the rear of the chassis Technical condition: good Optical condition: good Damage: none

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m Lasdpfx Ajvanrcslbjh T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _____ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: good (used), Year of construction: 2007, functionality: fully functional, Brand: ZMM Model: CU800TRD Year of manufacture: 2007 Control: Conventional Distance between centers (mm): 3000 mm Swinging diameter over bed (mm): 900 mm Swinging diameter over carriage (mm): 540 mm Axes: X, Z Feeds: X, Z Spindle bore (mm): 158 mm Chuck diameter (mm): 800 & 500 mm Cooling: Yes Lajdpfx Aj Aa Ddzjlboh Power (KW): 30 kW Dimensions L x W x H (mm): 5100 x 2000 x 1900 mm Machine weight (kg): 7500 kg Description: includes tool rest, 3-jaw chuck, tool holders, tools, and various accessories. See photos.

Condition: used, mileage: 413,894 km, power: 309 kW (420.12 HP), first registration: 09/2008, fuel type: diesel, empty load weight: 12,620 kg, maximum load weight: 13,380 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, axle configuration: 6x2, wheelbase: 5,100 mm, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, traction control, trailer coupling, Color: White Ivory, unladen weight: 12,620 kg, permissible total weight: 26,000 kg, tire size: 315/80 R22.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring air suspension, lift axle, retarder, electronic brake system EBS, traction control system ASR, adaptive cruise control ACC, seat heating, xenon headlights: xenon, headlight cleaning system, radio, multi-function display, power steering, adjustable steering column, electric windows, sunroof, sliding roof, outside temperature display, fog lights, curb mirrors, wide-angle mirrors, central locking, sun visor, axle load indicator, hill start assist, daytime running lights, 1x15-pin connection plug, safety package, mirror package, speed limiter, temperature recorder, climate-controlled retarder, auxiliary heater, wheelbase 5100 mm, Euro 5, Opticurise 3 pedal, 1 bed, leaf spring air suspension, refrigerated box with ducting, internal dimensions L 7301 x W 2469 x H 2391, first owner, in top condition! Refrigeration unit Carrier Maxima 1000, diesel/electric, with 3578 operating hours, sold on consignment, non-binding offer, subject to errors and prior sale. Image may not match the offer. Laedpfx Alj Advvdobjh

Condition: used, mileage: 165,000 km, power: 132 kW (179.47 HP), first registration: 12/2020, fuel type: diesel, overall weight: 7,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Special equipment: Storage compartment in the headliner of the cab, storage compartment on the dashboard with USB connection, front axle load 2.7 t, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, rear differential lock, automatic climate control, steering column (steering wheel) adjustable in height/length, light and rain sensor, switch for lighting in the cargo area, rear cross member at the end of the frame, mud flaps at the front, seats in the cab: luxury driver's seat, Traction Plus (electronic traction control) with hill descent assist, auxiliary heater (hot water) with timer control Additional equipment: Airbag on the driver's side, trailer stabilization program (TSM), trailer socket preparation, anti-slip regulation (ASR), version: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, brake assistant, electronic brake force distribution, driving assistance system: hill start assist (AAS), driving assistance system: emergency braking assistant AEBS + City Brake, driving assistance system: lane monitoring assistant proactive (LDWS), digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, transmission automatic - Hi-Matic (8-speed), grab handle A-pillar, urea tank (AdBlue): 20 liters, body/superstructure: standard flatbed, fuel tank: 90 liters, engine 3.0 liters - 132 kW diesel, wheelbase 5100 mm, spare wheel in driving tires, low emission according to emission standard Euro 6d, seats in the cab: double passenger seat, maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle Palfinger tail lift, 1000 KG Interior cargo area: L 6.20 W 2.46 H 2.51 meters Lajdpfxj Acczqo Albjh Payload: 2600 KG Financing possible

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Lasdpfxozdqrpj Alboh Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket

Condition: good (used), Year of construction: 2023, stroke length: 350 mm, overall weight: 22,500 kg, total length: 7,000 mm, total width: 2,300 mm, total height: 3,200 mm, power: 30 kW (40.79 HP), pressing force: 320 t, clearance between the columns: 5,100 mm, table length: 6,050 mm, Press force: 320 t Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 350 mm Installation height: 650 mm Total power requirement: 30 kW Machine weight (approx.): 22,500 kg Space requirement (approx.): 7000x2300x3200 mm Accessories/Equipment: - ESA S 875 PC control system Lsdszr U S Aopfx Albeah - 4 support arms in front of the machine - 4 stop fingers - Light curtain in front of the machine - Foot switch

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: Ledpjv Tzw Ejfx Albsah - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.