Used Tec Duplex Chain Roller Chain for sale (17,033)

Condition: used, Air cooler, evaporator, cold storage, refrigerated container, cold room Bledsb A Iv Dopfx Adrei -Number: 2x fans 0.58 kW 1200 watts -Weight: 16 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting Bodjb A Rfiopfx Adrjli -inch thread: 1"- 2" inch -Weight: 6.5 kg

Condition: good (used), Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal actuator -Manufacturer: L-TEC, Pedal actuator foot remote control type FC-4 -Connector plug: 5-pin -Overall dimensions: 300/155/H190 mm -Weight: 4.2 kg Bodpfx Adehu Sumersli

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT Blodpevri Nmofx Adrei - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Table height: 405 mm Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Bledpfxjxvybds Adrji Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Condition: used, Year of construction: 2009, Roller conveyor - length: 3 m - roller width: 160 mm - electric motor: 0,55 kW Bjdpfx Adstrwc Sorjli

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m Bodpfjufib Rox Adrjli - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 11353-24, travel distance X-axis: 500 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 240 mm, table width: 550 mm, table length: 450 mm, overall weight: 5,500 kg, spindle speed (max.): 42,000 rpm, Roders TEC RXP 500 – Precision 3-Axis CNC Milling Center Year of manufacture: 2005 Bsdpfx Aowww S Ssdreli We offer a used 3-axis CNC machining center Roders TEC RXP 500, renowned for its exceptional precision, high dynamics, and surface quality. Ideal for tool and mold making, micromachining, aluminum, and plastics processing applications.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Bljdpfxjwhc U Te Adrji

Condition: used, functionality: fully functional, WLD-TEC Gasprofi 1 Gas Burner with bottle and pedal. Bsdpeubc Hfofx Adroli 2 for sale. 1 piece/200 EUR. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Ceramic angle standard from Wilbanks (CoorsTec) 600x460x80mm Bljdpeq Tdlzsfx Adrji Perpendicularity < 4µm Little used, very good condition Measurement protocol on request (surcharge)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0656-000, space requirement length: 7,000 mm, space requirement width: 5,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 5,000 mm, total width: 5,000 mm, total length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet length: 1,200 mm, control cabinet width: 400 mm, type of input current: three-phase, input voltage: 380 V, power: 30 kW (40.79 HP), 6 stainless steel silos, of which 3 silos are equipped with internal mixers. Capacity per silo approx. 6 m³. Additionally, there is a big bag filling station with dust extraction included. Control cabinet including weighing hopper for batch preparation. Blodpfx Adjx R Sr Horsi

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,300 kg, maximum load weight: 32,700 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2010, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: blue, trailer brake: trailer braked, Year of construction: 2010, Equipment: ABS, Used extendable DTEC container semi-trailers with 3 SAF disc-braked axles, 1st and 3rd axle liftable, EBS, air suspension, rear and central extension for transporting containers: 1 x 20’ flush, 2 x 20’, 1 x 30’, 1 x 40’, 1 x 45’, swap bodies from 6.015m to 13.60m, tank containers, Hi Cube, year 2010, full ADR equipment, 2 identical units available while stocks last. Authorized dealer: INTERDRIVE SRL-Parma. Blsdpfx Adsxv A Erjrsi

Year of construction: 2021, condition: as good as new (ex-display), Max. drilling diameter 50 mm Max. travel of spindle 315 mm Max. distance from spindle axis and column 1600 mm Min. distance from spindle axis and column 350 mm Max. distance from spindle nose to surface of base worktable 1220 mm Min. distance from spindle nose to surface of base worktable 320 mm Spindle taper MT 5# Spindle speed steps 16 step Spindle speed range 25~2000 r.p.m. Bljdpfxjh H Edij Adrei Spindle feed steps 16 step Spindle feed range 0.04~3.2 mm/r Dimension of worktable 500x630 mm Arm length 2140 mm Power of main motor 4 Kw Machine dimension 2500x1060x2655 mm Net. Weight 3.50 Ton

Condition: used, Year of construction: 1987, material width 120 mm material thickness 0,2 - 4,0 mm no. of straightening rolls 19 straightening roll diameter 24 mm material cross-cut 2 - 120 mm² 40 mm bending speed 5 - 25 m/min power requirement 2,5 kW Bsdpfoynmpaox Adroli weight 0,85 t dimensions (WxDxH) 1,2 x 1,7 x 1,6 SPECIAL DEAL as is where is, IN NEED OF OVERHAUL WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck Bodpfsvuk Sbox Adroli

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Tank rotating device for welding pipes and tanks Bodpozin A Aofx Adroli Manufacturer: PH Maschinenbau Type: PH-RBA 30000-SO AT01H424 Year of manufacture: 2002 Load capacity of the rotating device: 30 tons Rotational speed: 0 to 2 m/min Tank diameter: 500 - 7000 mm Roll spacing: 100 to 2500 mm Center distance between rolls: 500 to 2950 mm Roll diameter: 400 mm Roll width: 540 mm Motor power: 2 x 0.55 kW Power connection: 230 volts, 50 Hz - Infinitely variable speed adjustment via SEW frequency inverter - Cable remote control - Right and left rotation - Both roll pairs are driven - Rolls with 4 rubber tires each - Manual adjustment of the roll spacing via trapezoidal screw spindle - Rail-mounted chassis with drive, steel cast wheels with smooth roll surface Space requirement L x W x H: 3750 x 2100 x 1200 mm Weight: 3.2 t Good condition

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg G Blodpfx Aezinw Tedroi

Condition: used, Year of construction: 2007, operating hours: 4,000 h, 2007 | Bomag BW 100 AD-4 | Used Tandem Roller | 4000 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 44 inspection points 42 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ Bjdpfx Ajzim T Hsdrsli 📌 Inspector's Comment: Machine in good condition. The meter has been changed, so the 200 hours are not real, but everything is in order and there is nothing to report. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40959 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 11,845 h, load capacity: 3,000 kg, lifting height: 3,650 mm, fuel type: diesel, mast type: duplex, construction height: 2,470 mm, power: 36 kW (48.95 HP), drive type: Diesel, Diesel forklift Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: LINDE H30D-02 EVO diesel forklift - - 3-ton lifting capacity - - Year of manufacture 2018 - - 11,845 operating hours according to display - - - DUPLEX free-lift mast - - SIDE SHIFTER - - FORK POSITIONER - - Overall height 2.47m - - Lifting height 3.65m - - 4-cylinder VW Turbo diesel engine 36 kW - - Half cab, lighting system, work lights - - Tires: Solid rubber, front: 90%, rear: 60% - - 3rd valve, 4th valve - - - Original paint - - Good original condition - - Dual pedal version - - New seat cushion Side shifter, fork positioner, Bljdpfozigyysx Adrji 3rd valve, 4th valve, rear work light, windshield, half cab, Half cab with front and rear windshield -- Lighting system -- Rear headlights -- Dual pedal version -- New seat cushion

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 18,530 kg, operation weight: 18,530 kg, Year of construction: 2026, operating hours: 10 h, JCB VM200D Vibromax/Roller/18 Tons • Manufacturer: JCB • Model: VM200D • Year of manufacture: 2026 • Operating hours: 10 hours • Power: 129 kW/175 hp • Air conditioning • Large and small gear groups • Fast and slow gears • Engine: Cummins 4-cylinder diesel engine • Roller diameter: 1.50 m • Roller width: 2.10 m • Transport height: 2.99 m • Transport width: 2.27 m • Tires in like-new condition • Total weight: 18530 kg • German machinery • Immediately ready for use • This offer is non-binding and subject to change. Bledpfx Aszicfredrei - Subject to prior sale. - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. Blodegvvn Eepfx Adrji height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES Blodozh If Iepfx Adroi – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), functionality: fully functional, power: 53 kW (72.06 HP), fuel type: diesel, overall weight: 9,520 kg, operation weight: 9,520 kg, Year of construction: 2019, operating hours: 2,353 h, Equipment: adjustable boom, air conditioning, centralized greasing system, gripper hydraulics, hammer hydraulics, rubber tracks, Kobelco SK85 MSR-7 / Powertilt / OQS / Air Conditioning / Hydraulic Adjustable Boom / 2 x Buckets • Manufacturer: Kobelco • Model: SK85 MSR-7 • Year of manufacture: 2019 • Operating hours: 2353 hours • Power: 53.7 Kw / 73 hp • Engine: Yanmar 4-cylinder diesel • Powertilt: Wheeled Tilt 90 • Hammer/Grapple hydraulic lines • High/Low speed • Central lubrication system • Swivel boom • Overload warning • Air conditioning • Hydraulic quick coupler • Hydraulic adjustable boom • Dozer blade • 360-degree camera • Bucket: 1.70 meters wide • Bucket: 50 cm wide • Transport length: 6.75 m • Transport width: 2.3 m • Transport height: 2.57 m Bsdozhwk Hspfx Adreli • Total weight: 9520 kg • First owner • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos excluded.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Horstmann chain belt conveyor, type PK 1100/11, manufactured in 2011 Manufacturer: Horstmann Type: PK 1100/11 Year of manufacture: 2011 Length of infeed belt: approx. 3000 mm Length of inclined section: approx. 5000 mm Gooseneck: approx. 1000 mm Belt width: 1100 mm Conveyor speed: approx. 0.2 m/s (max. 0.3 m/s) The conveyor belt is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The belt has cracks on one side. Blodpfxezhr Aqe Adroi Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.