Used Slicing Line - Slicer, Scale for sale (12,660)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam Ndjdpfx Abjhzbipo Aoc - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, 0 199,5 x 67,5 x 64 mm operating pressure 2,5 - 8,0 bar air consumption at 6 bar 350 l/min weight of the machine ca. 0,23 t Nodeupxfzjpfx Ab Aodc dimensions 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter)

Condition: like new (used), Automatic line which has been used for producing 2 million toffee / candy apples over 6-8 week period. Complete lines available, to manufacture the toffee sauce, melt the chocolate, fire sticks into the apples and robotically dip them in sauce then flow wrap the finished product. Nodpfjhtv Uwox Ab Asdc

Condition: reconditioned (used), Year of construction: 1996, No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW Ndjdjgbffvopfx Ab Asc 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Condition: good (used), Scale Ndjdpfxsdx D T Ej Ab Aec Manufacturer: Massi Measuring length: 500 mm Beak length: 150 mm Overall length: 670 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Condition: used, complete, and fully functional. The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. The terms for dismantling, loading, and transport can be agreed upon individually. Price: 49,900 EUR net. Nodpfxjz Ix Aze Ab Asdc

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Production batch for the rubber industry. Nodpfx Aoz Ix A Isb Aodc

Year of construction: 1988, condition: used, Olma Combi Door Panel Line (1988), Panel Dimension Length Min/Max 330/1320 x 538mm Width, Cycle Time 17 Seconds, Dimension of Sheet Min/Max Length 390/1400mm x 600 Width x 0.5mm Thickness Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Ndsdpfxez I Szqo Ab Ajc

Year of construction: 2026, condition: new, PLN-75 Mini Film Waste Pelletizing Line with Air Cooling The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 30~50Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 15 кW 4. Total Power: 29 кW Nedpez Nlfmefx Ab Aedc 5. Screw Diameter. : 75 mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE,LLDPE pelletizing, scraps or rolls

Year of construction: 2022, condition: used, - Model: Classic Line 2 FE - Year of manufacture: 2022 - Load capacity: 800 kg - Collection capacity: 205 liters Njdpfx Aozrvk Tjb Aedc - Dimensions: 1,236 x 815 x 360 mm - With grating - Steel construction - Color: blue (powder-coated) - Weight: 64 kg

Year of construction: 2022, condition: used, - Model: Classic Line 60 KK - Year of manufacture: 2022 - Load capacity: 400 kg - Collection capacity: 65 liters - Dimensions: 785 x 639 x 281 mm - With grating Ndedpozrvkasfx Ab Ajc - Steel construction - Color: blue (powder-coated) - Weight: 37 kg

Condition: used, Year of construction: 2022, Overview Complete PET bottling line for still mineral water in 6.0 L PET bottles with handle, max. 6,000 bottles/h. The heart of the line is an SMI ECOBLOC ERGON blow moulder-filler-capper combiblock, followed by handle application, rotary labelling and robot palletizing. Built in 2022, started up in 2023 and run only 3 to 4 times a year. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle, single bottle with handle and EAN barcode - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap - Pallet: Euro pallet Scope of Delivery - Blow moulder-filler-capper combiblock | SMI | ECOBLOC ERGON 6-20-5 HC EV | blow moulder for 6 moulds (moulds not included), filler with 20 filling valves, capper with 5 capping heads, cap sorter and cap elevator | 2022 - Discharge conveyor | SMI | bottle conveying from the combiblock | 2022 - Accumulation table | SMI | FIFO | for filled bottles | 2022 - Bottle divider | SMI | DV 500S ERGON | 1 lane in, 2 lanes out | 2022 - Drying tunnel | EUROPOOL | before the handle applicator | 2022 - Handle applicator | TWINPACK | double lane, with barcode applicator | 2022 - Drying tunnel | EUROPOOL | before the labelling machine | 2022 - Bottle combiner | SMI | 2 lanes in, 1 lane out | 2022 - Conveyor | SMI | from the accumulation table to the labelling machine | 2022 - Rotary labelling machine | P.E. LABELLERS | ROLLMATIC MODULAR TOP SL 960 10T | 2022 - Conveyor | SMI | from the labelling machine to the palletizer | 2022 - Palletizer | BEMA | 2 FANUC robots, interlayer device | 2022 - Electrical panels | main distribution panels with all components for all machines and conveyors | 2022 Ndjdjz Ag U Dspfx Ab Asc - Format parts and spare parts | all available format and spare parts Not included Pressco preform and neck inspection, Heuft fill-level and cap inspection, pallet wrapper, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder, low-pressure compressors, utilities, piping and wiring from the main distribution to the machine panels, civil works. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEMs plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the line must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels Ndedjzg Epujpfx Ab Aec IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Ndodpfxjz En Axo Ab Asc Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Ndedpfxsz N Ahxs Ab Ajc Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: used, used good condition low mileage cleaned functionality tested Manufacturer: Hoffmann Model: MU X-line Stop for stub tenon Nodpfx Abjz Np Ixj Aedc Stop for miter cut New price approx.: 1900.00 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2000, Fritsch CTR croissant production line, manufactured in 2000. The line includes: 1. Fritsch calibrator KK 88-700-L 2. Fritsch infeed conveyor with flour dispenser 3. Fritsch cutting and rotating unit CTR-700-30-L 4. Fritsch winding machine for filled products FRH-400-L Ndsdpfez Ia Nvex Ab Aec 5. Fritsch winding machine for unfilled products CRH-120-400-L 6. Fritsch filler Used and refurbished. Manufactured in Germany. Price upon request.

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Grooving Line – Double Unit DP20 An industrial dovetail grooving and gluing machine – developed for maximum precision and efficiency. Technical specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail design: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connection power: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of supply: WEINIG NKT Double Unit DP20 including control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-damping and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous output. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range of chip removal: 10 mm (surfacing and jointing side) Njdpfx Abez E Awqj Ajdc • Machine design: Without counter bearing, in high-performance design

Condition: used, mileage: 113,682 km, power: 140 kW (190.35 HP), first registration: 02/2019, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 88631A Equipment lines and packages * PS2 AMG Line * ZH8 Avantgarde Edition * MX0 BlueEFFICIENCY package * ZH8 Design and Equipment Line Avantgarde Edition * JP2 Driving Assistance Package * Z3N Night Package * EZ6 Parking Package with 360° camera * FP3 Mirror Package Exterior * E57 Trailer coupling: electrical system for trailer socket * Drive type: rear-wheel drive * Exterior mirrors, aspherical, both sides * Exterior mirrors, electrically foldable * F69 Exterior mirrors, electrically adjustable and heated, both sides * F69 Exterior mirrors with integrated turn signal * Exterior mirrors with blind spot assist * Exterior mirrors with ambient lighting * Exterior mirrors, painted black * Brake calipers with lettering (Mercedes-Benz) * AMG roof edge spoiler * D14 Aluminum roof rails, anodized * C74 Door sill panels with Mercedes-Benz lettering (illuminated) * Window for rear doors / tailgate with wiper / washer system * W16 Window in the cargo / passenger compartment: fixed, front left * W17 Window in the cargo / passenger compartment: fixed, front right * AMG front skirt * LED rear lights * W64 Rear window, lift-up * Heated rear window * AMG rear skirt * LG2 Intelligent Light System LED * Body / structure: van * Body / structure: long * KB5 Fuel tank: enlarged * Radiator grille, painted black * Light alloy wheels * IL6 Metallic paint * IN2 Wheelbase 3200 mm * RR6 Spare wheel with jack * JF1 Windshield wipers with rain sensor * T19 Sliding door, cargo / passenger compartment, left * T55 Sliding door, right, electrically operated * Daytime running lights * XA5 Permissible total weight 3.2 t Interior * SZ7 Storage net on the left front seat backrest * Storage net on the right front seat backrest * LC1 Ambient lighting * Outside temperature indicator * Roof lining / headliner, fabric, black * LB9 Entry lights * Power windows, electric, 2-way * VH1 Grab handles in the rear * Interior filter: pollen filter * HZ7 Automatic climate control in the rear (Tempmatik) * HH4 Comfort automatic climate control Thermotronik * SH9 Head airbag system (window bag) * YG4 Cargo area divider * CL3 Steering wheel (leather) * FG0 Center console in front with roller shutter / storage compartment * UR1 Seat equipment: quick-release mechanism for seat rail system * VX7 Seat cover / upholstery: Lugano leather * Seats in the cab: co-driver's seat, heated * Seats in the cab: co-driver's seat with lumbar support * H16 Seats in the cab: driver's seat, heated * SE5 Seats in the cab: driver's seat with lumbar support * US6 Seats in the cargo / passenger compartment: 1st row, 1 single seat, left * US7 Seats in the cargo / passenger compartment: 1st row, 1 single seat, right * US5 Seats in the cargo / passenger compartment: 2nd row, 3-seater bench, comfort Ndedpfx Abezll Nfs Aec * FS5 Sun visors with mirror (illuminated) * Sport pedals, brushed aluminum * Rear window, tinted / black glass * H00 Warm air duct to the cargo / passenger compartment Multimedia * JA1 Display for windshield washer fluid level * EJ9 Audio navigation system: COMAND Online * Hands-free system Bluetooth * Infotainment system: Remote Online * JK5 Instrument cluster with color display * EY3 Communication module Mercedes me connect (Internet-based services) * Media Interface (universal interface for iPod / AUX / USB) * EY5 Mercedes-Benz emergency call system * E65 Surround sound system Burmester * Service interval display Assyst Comfort and Environment * E07 Hill-start assist * Direct steering with va

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 Nodpfxoz Ri N Es Ab Aedc 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Nodpsz Ri Risfx Ab Aedc Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: excellent (used), 590 USED Bread, ciabatta, and bun, roll line KEMPER QUADRO. EQUIPMENT: - dough divider-rounder with belt dough feed - dividing and rounding station + longitudinal cutting rollers + 3 rounding drums - stamping station - cross-cutting guillotine - two stations for double-sided seed topping - tray-loading station (for 60x80 and 60x100 trays) The price is a net price. Ndsdpfx Abez Rivrj Ajc Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Dry board sorting line ⁠Manufacturer: Reinholmen Speed: 90 pcs/min ⁠Pockets: 234 Year of production: 2000 Electric cabinets renovated 2022 Nsdoxyixajpfx Ab Aodc

Condition: used, Year of construction: 2016, functionality: fully functional, Conveyor line / roller conveyor system / material handling system, material handling equipment, approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Conveyor line Condition: Used Year of manufacture: 2016 The system consists of: 1 x Inclined belt conveyor, approx. 3.2 meters long 2 x Pneumatic lifts 3 x 90° bends 2 x Folding elements / passage elements 1 x Control cabinet 25 pcs adjustable feet and the remaining conveyor belt / roller conveyor, approx. 34 meters Ndodex Ala Ejpfx Ab Aoc Total length: approx. 50,000 mm Total width: 750 mm Conveyor width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The material handling equipment was in operation until disassembly. Thanks to the excellent workmanship of the material handling equipment, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Condition: used, Gainsborough bagger and All-Fill powder depositor. Nodpfx Aovvpphsb Asdc