Used Sick Reflective Light Barrier for sale (17,775)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, 2-stage support jacks, single-sided operation with anti-splash flaps according to EC Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam Iodpfx Aqsi Rixkousic 4 hose racks, approx. 4500 mm long, for hose pipes 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right on the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear on the right outside on the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation 3x brakes Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the screen in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating Instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-crossmember-load-transfer areas")! Country of Approval/Signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Acceptance according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank We offer you here a crash barrier for sale. The scope of delivery includes 01x crash barrier, used Total length: approx. 2,530 mm Clear width: approx. 2,350 mm Iodpfx Aqjhncu Sjueic Total height: approx. 600 mm Total depth: approx. 90 mm Consisting of each: 01x CS-Sigma profile, used Material color: sendz. galvanized Profile dimensions: C: 300 x 75 x 2 mm Weight / pc.: approx. 16.00 kg Clear width: approx. 2,300 mm 02x Post, used Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded-on screw-on plates: approx. 200 x 100 mm Square profile: 90 x 90 mm Weight / piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), The scope of delivery includes: 01x crash barrier, used Manufacturer: Dexion length C-profile: approx. 1.050 mm total length: approx. 1.320 mm total height: approx. 400 mm total depth: approx. 185 mm The crash barriers are pre-assembled. Consisting of each: 01x crash barrier, used Material color: yellow Cross section: C 385 x 50 x 30 mm material thickness: approx. 3 mm length: approx. 1.050 mm 01x protection corner, used material color: yellow|black or yellow painted design: right total height: approx. 400 mm total depth: ca. 185 mm weight: approx. 9,96 kg | pcs. 01x protection corner, used material color: yellow|black or yellow painted Isdpfelq D Avsx Aqusic design: left total height: approx. 400 mm total depth: ca. 185 mm weight: approx. 9,96 kg | pcs.

Condition: excellent (used), The scope of delivery includes: 01x crash barriers, second choice Clear width: approx. 2,500 mm consisting of each: Iodsvir Hispfx Aquoic 01 x C - profile, used Material color: galvanized Profile dimensions: 300 x 85 x 28 x 15 mm Material thickness: 3.0 mm Length: 2,400 mm 02x L- collision protection corners, new Material color: yellow / black according to DIN standard Height: 400 mm Unit weight: 6.10 kg Outer width: 305 mm Side length: 170 x 170 mm Hole diameter: 15.5 mm Material thickness: 5 mm 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier guardrail is supplied compl. delivered pre-assembled. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any other desired transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x collision protection guard rail, new / used Material color: yellow / black / white Total height: 400 mm Total depth: 180 mm Clear width: 800 mm Consists of: 02x Sigma profile, used Material color: white Profile dimensions: C: 130 x 50 mm Clear width: 800 mm 02x L - collision protection corners, new Material color: yellow / black Iiodjvmz Ahspfx Aqusc according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is delivered completely pre-assembled. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), We are offering you a second choice crash barrier for purchase. The scope of delivery includes: 01x collision protection guard rail, 2nd choice Material color: yellow/black/galvanized Total height: 400 mm Total depth: 180 mm Clear width: 1,200 mm Consists of: 01x CS Sigma profile, 2nd choice Material color: sendzimir galvanized Profile dimensions: C 300 x 75 x 2 mm Length: 1,100 mm 02x L - collision protection corners, new Material color: yellow/black according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Iiodpfx Aqjhpub Ajuoc Material thickness: 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is supplied complete. delivered pre-assembled. General information about the article: This article is only available for collection. Any additional transport or shipping of this article is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), We offer here a II. Choice crash barrier for sale. The scope of delivery includes: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized total height: 400 mm total depth: 180 mm clear width: 2.500 mm Consisting of respectively: 01x CS Sigma profile, II. choice material color: sendzimir galvanized profile dim.: C 300 x 75 x 2 mm length: 2.400 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Weight/piece: 6,10 kg Isdehpucropfx Aqueic 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier is delivered compl. delivered pre-assembled. General information about the article: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x collision protection guard rail, new / used Material color: yellow / black / white Total height: 400 mm Total depth: 180 mm Clear width: 1,200 mm Iodevmzxcopfx Aqujic Consists of: 02x Sigma profile, used Material color: white Profile dimensions: C: 130 x 50 mm Clear width: 1,200 mm 02x L - collision protection corners, new Material color: yellow / black according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is delivered completely pre-assembled. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Iisdpfei Ri Ayjx Aqujc Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Iedpfx Asi Riwmjqusic Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with 2 interchangeable kingpins Container mounts: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload Transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Semi-fender with anti-spray flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure on the EBS module, located externally. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau, 10-year guarantee against rust penetration Support legs black coated without pallet box paint Note: Archive images!

Condition: excellent (used), mileage: 12,818 km, power: 74 kW (100.61 HP), first registration: 07/2023, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2023, Number of doors: 5 Cab type: single Number of cylinders: 4 Engine displacement: 1,500 cc Iodow Tdayopfx Aquoic Technical condition: very good Optical condition: very good Damages: none Warranty: none

Condition: used, Ex-Linear light fitting with metal housing for surface mountingMake: EATONTyp:AB 12240 E36 pieces availableNew Items Iisdpfxed N Sv Nj Aqujc

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm Ijdpfx Asu Nigkoqueic cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. Iiodpfx Aqou Nigwousc *

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm Isdpfotwn E Ujx Aqujic

Condition: like new (used), TOOL FOR ROAD BARRIERS LENGHT 6000mm Iiodpfx Aqohylzrousc

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. Ijdpozavzvsfx Aqueic DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Fe-Ma-Tech Bag Melter Glue Application Unit: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition - Weight: approx. 70 kg - Dimensions: 550 x 430 x 970 mm - Type of glue pump: Gear pump - Pump nominal speed: 93 rpm - Base tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heating / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Iiodpfxsw I S Eao Aquoc Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg. Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts. Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed. A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive. From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly. Shipping via freight forwarding is available for an additional €190.40 #8404

Condition: good (used), Approx. 1,500 Pick-by-Light display modules/modules, used: Price per unit ex-works: only €15 (net)! The aluminum plug-in rails may also be available for purchase if you are interested! Manufacturer: KBS Type: PTF-L-6-VAR00 Year of manufacture: unknown Condition: good Available: immediately Iedpfjv Rgn Djx Aqusic Location: Lunzenau warehouse

Condition: good (used), Year of construction: 2021, functionality: fully functional, PUR melting device for aluminum pouches/cartridges, with hose and filling head for use on edge banding machines Weight approx. 73 kg Melting capacity up to 2 kg Gear pump All heaters can be adjusted separately Iiodpfx Aqey S Rw Rsuec With electronic interface for glue level detection in the gluing section of the edge banding machine (level sensor "Tippkemper" for glue application, provided by the edge banding machine manufacturer) Connection value 400 V, 50 Hz, 3Ph, N Device delivered completely cleaned and with PUR cleaner.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 50 kg, type of input current: AC, overall weight: 65 kg, table load: 50 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, We are offering this very well-maintained KEYENCE VL-500 3D line scanner, manufactured in 2021. Manufacturer: KEYENCE Model: VL-500 Year of manufacture: 2021 Condition: very good Category ID: 402 Type ID: 1927 Machine type: 3D line scanner Included in the offer: 1 unit of control unit, part no. VL-500 1 unit of 500 mm base, part no. VL-550 1 unit of measuring head, part no. VL-570 1 unit of accessories, including calibration plate, user manuals, part no. VL-A2D 1 unit of cover, part no. VL-C2 1 unit of Win10 PC for VL-500 series, part no. 972337 1 unit of comparative measurement module, part no. VL-H2P Iiodpfx Aey U Ngcjquoc 3 units of AC power cables, part no. OP-99031 Condition is very good, as the scanner has rarely been used. Also included: Calibration certificate valid until 2025. If you have any questions or require further information, please send us a message or call us.

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Iiodpshrkrtsfx Aquec Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Ijdpfxowtr Iyj Aqusic Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2022, operating hours: 1,635 h, functionality: fully functional, WINDSHIFTER: Separation of LDPE from the light fraction of SDS. Infeed material belt width 800 mm. Rotary air separator with a capacity of 17,000 m³/hour. Power 17.2 kW. Equipped with filter model BF104m. SDS: Single-drum separation system. For MSW separation. Infeed belt length 2750 mm, width 800 mm. Expansion room 6000 x 2400 mm. Power consumption 32.2 kW. Dimensions 11460 x 2400 x 6770 mm. Iiedpfxsy Smwao Aqujc

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm equipped as standard with: - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system Iiodpfxetuch Eo Aqujc - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions