Used Senfeng Sf 3015H 12Kw Max Laserquelle for sale (25,258)

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall Fodpey Auhujfx Akyspn * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Year of construction: 2026, condition: used, New: Yes Empty weight: 35 kg Dimensions of cargo space: 40 x 20 x 60 cm CE mark: yes Fpsdpfxoy Dnvbj Akyen Serial number: DPX-27500 Please contact Team DPX for more information Automatic Transfer Switch - ATS Panel - ATI Panel 45 Ampere - Applicable for generators up to 25 kVA

Year of construction: 2026, condition: used, New: Yes Empty weight: 90 kg Dimensions of cargo space: 60 x 40 x 100 cm CE mark: yes Serial number: DPX-27508 Fpodsy Dnvzspfx Akyen Please contact Team DPX for more information Automatic Transfer Switch - ATS Panel - ATI Panel 1250 Ampere - Applicable for generators up to 435 kVA

Year of construction: 2026, condition: used, New: Yes Empty weight: 110 kg Dimensions of cargo space: 60 x 40 x 100 cm CE mark: yes Fjdpfxsy Dnv Us Akyspn Serial number: DPX-27509 Please contact Team DPX for more information Automatic Transfer Switch - ATS Panel - ATI Panel 800 Ampere - Applicable for generators up to 550 kVA

Condition: new, GMN HF spindle / High-frequency spindle HSP150DH 381 12kW / 350Hz / 7000rpm / 400V SN: 376010, unused in opened original packaging, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packaging and shipping! Fedpfx Asy Np U Aokyjpn

Year of construction: 2005, condition: ready for operation (used), Machine tool manufactured in 2005. This KOMAX GAMMA 333 PC features a configuration with multiple MCI711 presses equipped with contact strip cutters and various feed options. It includes two 2-meter long conveyor belt extensions for efficient operation. If you are looking to get high-quality automation capabilities, consider the KOMAX GAMMA 333 PC machine we have for sale. Contact us for further details. Fpedpfx Ajy Ukfaekyen • Machine configuration: • Side 1: • 1x MCI711 press with contact strip cutter; Rear contact feed - passive • 1x MCI711 press with contact strip cutter; Rear contact feed - passive; Side contact feed active - with paper strip winding • Side 2: • 1x MCI711 press with contact strip cutter; Rear contact feed - passive • Control software: TopWin 2.4.3.24 • Note: Machine sold without mini-applicators Additional equipment • Conveyor belt: 2x 2 meter long conveyor belt extensions

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data Fjdpfx Aezc Hvpskyopn • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: excellent (used), Heating boiler Viessmann Vitomax 2100kw. Weishaupt incl.dual fuel burner Fpedpsmnqtcjfx Akyen

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Fsdpfsflz Hdox Akyopn Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60-SNG L GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 110kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Transport : TWO containers. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * LOW SHIPMENT COST(TWO 40F-OT containers or TWO standart trailers) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 950 lt/min Fpjdpfx Ajflz Hfekysn Aggregate Hopper : 60 m³ / 80 m³ Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x14.500 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2025, Plant Type : STATIONARY Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 100m³/ hour freshly compressed concrete Mixer Capacity: 3000/2000 lt (2m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS Fpodpfx Akjflz H Djyen OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Italian- French-German-Spanish- Arabic-Russian languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed with extension modules each 1m rooms at any location where it is required. 6,60 x 2,99 x 3,5 m A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without Fedpfx Aksfnh Rzsyjpn interruption for the blaster.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also prints in color on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Volume For large objects with a high clearance height. Print head: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Includes software for printer control and image editing. Weight: 90 kg Control display Table movement via screw mechanism 360-degree operation available upon request: for large, round bottles or other objects A2 size 45x65cm and 40cm printing height Printer dimensions: 107x106x102cm Water circulation cooling system Fodpefvx U Hsfx Akyspn Software settings and printer explanations are available upon request. Available throughout Germany and Europe.

Year of construction: 2021, condition: new, Fiber delivery cable with instalation ( splicing )on your IPG, Maxphotonic , Raycus, GW.... laser source. We are doing reparation IPG laser module in your place with warranty. Fpjdpfx Akeg D Urgeyen Speaking English and Serbian language.

Condition: excellent (used), P/N: 190.101 // Fabrik No.: 616 Fpedpfxsgnlb Aj Akyon Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: ready for operation (used), Bosch SF-A3.0068.015-10.050 Brushless servomotor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fedpei D Hgfjfx Akyepn

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 1107, P/N: 190.101 Fpedpfx Asihvl Ijkyen Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), machine/vehicle number: 783, P/N: 190.101 Fpedsiiv Dnspfx Akyjn Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: new, Year of construction: 2026, functionality: fully functional, A machine for processing wooden items such as beads, boards, profiles, beams, and flooring strips, with a maximum width of 60 cm and a height of 30 cm. It features an integrated motor-shaft unit with a diameter of 45 mm to ensure maximum rigidity, and dynamically balanced high-speed brushes for vibration-free operation. The machine consists of two independent brushing units; the first unit (steel brush) is used for rough processing, while the second unit (silicon carbide brush) is used for finishing. The degree of processing can be adjusted by setting the working depth. Fodpfsh Auu Asx Akyepn

Year of construction: 1962, condition: good (used), machine/vehicle number: 364, Max. pressure at 4.2 l/min: 550 - 570 bar Capacity approx.: 30 l Fjdpsb Nuugefx Akyepn Hydraulic motor: 220/380 V, 1400 rpm, 4 kW Straight-cutting machine, type GS 22 Cutting range at 140 kg tensile strength: 6 - 12 mm Ø Cutting rate approx.: 8 - 12 /min Straightening device, type RK 26 For straightening strip steel and round stock with a tensile strength of: 26 - 50 kg Weight approx.: 10 kg Space requirement: 1200 x 900 x 850 mm Total weight approx.: 130 kg

Condition: used, Gas and air filters, air filters -Manufacturer: Maxitrol Fsdpjd D Iq Dsfx Akyjpn -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Condition: new, Year of construction: 2022, functionality: fully functional, Variable-speed IE3 screw compressor Fpsdoup Dwcspfx Akysn Technical data = see data sheet PDF.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, sheet thickness steel (max.): 80 mm, sheet thickness brass (max.): 80 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 290 mm, workpiece weight (max.): 1,400 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 9,100 mm, total width: 3,120 mm, total height: 2,200 mm, warranty duration: 24 months, working range: 3,015 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3000-60000W MACHINE AVAILABLE ON HAND The machine can be loaded into a container. This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*1500mm, 6000mm*1500mm, 6000mm*2500mm; Laser power 6KW-80KW CNC system: FSCUT Max. Acceleration：2.8G Fpjdpfxoub Nwdj Akyjn BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm Fpjdeuhhzhopfx Akyen total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: ready for operation (used), Year of construction: 2011, operating hours: 685 h, Trench roller Ammann Rammax RW 1515 MIC, year of construction 2011, 685 operating hours, weight 1480 kg, radio control and cable control, service is done (oil, oil filter, both air filters), exhaust is self-made, Ser.Nr.50373, device is functional Fsdpjqazzhefx Akyopn