Used Schuko Dust Collectors for sale (5,204)

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 96.1 kW (130.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,224 kg, input voltage: 400 V, total width: 1,260 mm, total length: 3,300 mm, total height: 2,120 mm, warranty duration: 12 months, AIRCOOLED CHILLER MTA TAEEVO TECH 402 96.1 KW Cooling capacity: 96.1 kW / 27.32 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3, expansion vessel. Dimensions: 3.3x1.26x2.12 m Weight: 1224 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Bsdpfx Amsz Dt Udjrowu After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls Bedpfed Eqqwjx Amrjwu - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Bsdpfx Amsd Eqqzsrowu Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working STANDARD - Brake Motor Option EURO 150,--                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, pressure: 80bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 6100motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Bwjdpjd Etfwjfx Amrou

Condition: new, pressure: 50bending length: 2040column width: 2040daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3170x1960x2500weight approx.: 4850motor power: 11CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Bwjdpfx Amod Etfyerju

Condition: new, pressure: 200bending length: 4080column width: 4080daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5740x2130x2680weight approx.: 13000motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Bwsdpfx Amed Etf Asrju

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 6,250messurements (LxWxH): 4180 x 2150 x 2000 Bedpfoh Talzsx Amrewu Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, More technical data on request Bsdpfxsl Iir Ss Amrowu

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Bodpjm Nntyofx Amrjwu Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Bwodpfxjwrkctj Amrou Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: new, pressure: 150Cylinder: horizontal verschiebbarstroke: 350column width: 1500working speed: 3rapid traverse: 22length: 2500width: 1200heigth: 2500weight approx.: 2500Horizontally adjustable cylinder: 1000- Horizontally movable cylinder – 1000 mm Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation Bwodpfx Amewwng Toreu This is a stock photo

Condition: new, pressure: 70Cylinder: horizontal verschiebbarstroke: 350column width: 900working speed: 3length: 1700width: 700heigth: 2100weight approx.: 650rapid traverse: 29Horizontally adjustable cylinder: 550 - Horizontally adjustable cylinder - 550 mm Two working speeds – for precise and efficient operation Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Bjdpfxswwnhwo Amrewu Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English This is a stock photo

Condition: new, bending length: 2600sheet thickness: 6upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. Bodpfx Aex Twiiomrjwu - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, sheet length: 3060sheet thickness: 4messurements (LxWxH): 3700 x 2250 x 1400motor: 11weight approx.: 4000Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Bsdsgickyopfx Amrowu Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pc. squaring arm with scale 2 pcs. sheet support arms 1 additional sheet support arm (for models 1106–1306–1505) Finger protection Ball transfer table Easy blade gap adjustment from the front Ballscrew Bsdpjgick Dofx Amrowu Stroke (cut) counter Portable foot pedal with emergency stop button Photocell on the rear safety guards

Condition: new, sheet length: 2560sheet thickness: 2,5Standard Accessories: NC control Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pc. squaring arm with scale 2 pcs. sheet support arms 1 additional sheet support arm  Finger protection Ball transfer table Easy blade gap adjustment from the front Ballscrew Bwodpogiclaofx Amrsu Stroke (cut) counter Portable foot pedal with emergency stop button Photocell on the rear safety guards

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Bwjdpoh Alh Refx Amrsu Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Industrie Bitossi Alubit 90 cylindrical grinding stones Material: high density sintered alumina ceramic Dimensions: 35 x 35 Al 2 O 3 content [mass%]: 90.0 ± 0.5 Bwsdpfxed Szf Es Amrju Bulk density [g / cm 3]: 3.63 ± 0.07 Hardness (Rockwell scale): 78 ± 3 Hardness (Mohs scale): 9 Color: white Quantity: about 1500 kg on stock

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Motor power - 1.6 kW Power supply - 1 x 230 V / 50 Hz Bsdpfxsmxklho Amrswu Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Noise level - 74 dB(A) Further information Fan type - Suction turbine Hose connection - ~45 mm x 2

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Bedpfx Amoz Di D Iorewu Product details: Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information or to make an offer.

Condition: used, Complete Industrial Filling, Weighing & Roller Conveyor System Complete industrial filling and container handling system, previously used in an industrial production environment. The system consists of a stainless steel filling station combined with powered roller conveyors, weighing/control equipment, and automated controls. Main equipment includes: Stainless steel filling station Bwedpfx Amez Diutsrsu Powered roller conveyor system Mettler Toledo weighing and control equipment Mettler Toledo operator/control panels Siemens SIMATIC PLC control system Hitachi SJ200 frequency inverter SEW geared motors Vector Aandrijftechniek geared motors Stainless steel electrical/control cabinets Product filling connections and hoses Operator platform with stainless steel safety railing Local operator control panels Safety equipment and emergency stops Nomafast high-speed industrial door Associated electrical and mechanical equipment The system appears to have been designed for the automated handling, positioning, weighing, and filling of containers/drums in an industrial production process. Condition: Used industrial surplus Availability: Complete system as shown in the pictures Location: Rotterdam, The Netherlands The complete system is available for sale. Dismantling and loading can be discussed. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to make an offer.

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500 Bsdpfx Amjd Ab H Nerowu         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, sheet thickness: 10bending length: 3100upper roll diameter: 270messurements (LxWxH): 5600 x 1450 x 1600prebending: 8motor: 11Bottom Roll Diameter: 250Side Roll: 210 Technical specifications: - Hardened and polished rolls Bjdpfsd Ab R Ssx Amrjwu - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: DescriptionQtyNet Price (¤)Heating + Cooling11.477 ¤Variable Speed Rotation13.323 ¤Material Feeding Table 1000 × 2000 – 1 pcs12.414 ¤Central Support15.857 ¤Central Support Preparation1888 ¤Side Supports Left and Right15.020 ¤Side Support Preparation vs Standard1923 ¤Control System CNC-CS618.200 ¤Control System NC-CS617.721 ¤Ejector System113.020 ¤ We have many references!

Condition: new, bending length: 4100sheet thickness: 9upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Bjdpjd Ab S Hefx Amrjwu Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 10.250,00 We have many references!

Condition: new, bending length: 1550sheet thickness: 3.5upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 995,-- - Special voltage EURO 480,-- - Material feeding table Bjdpfx Amed Ab N Derswu - Lower roll is powered by electric motor We have many references!