Used Schmitz 1.600 X 2 Mm for sale (117,494)

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY Lsdpfey Aubuox Afaohf CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. Lodpfx Afscbq Nwsajhf machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: good (used), Roller conveyors with WDX drive - Roller width: 500 mm - Conveyor length: 2200 mm - Power supply: 2 energy-saving 24V DC motors - ITOH DENKI - Motor speed: 55 m/min - possibility of network control When buying 10 pieces of conveyors, the control cabinet is free. Lodpfxepxnu Re Afashf Also available for sale: - gravity conveyors - approx. 260 m - roller arches with drive - approx. 24 m - roller-belt module for directional transfer by 90 degrees - 15 pcs (including approx. 30 m of conveyors with drive) - roller belt conveyors with a roller width of 80 cm - approx. 15 m - PVC belt conveyors with a belt width of 80 cm - approx. 30 m - control boxes for conveyors - DWT/HC 30S dynamic scale - 2 pcs - Karton Flow type shelves of various sizes

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Lhedpjya Iaqjfx Afaef Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber elastic bandage with rim, 2 pieces -Tire size: Ø 410 x 130 mm -Bolt circle: Ø 145 x 18 mm -Hub bore: Ø 110 mm -Submission/Price: complete -Dimensions: Ø 410 x 130 mm -Weight: 21 kg/pc. Lodpfx Afoyzpmvoashf

Condition: good (used), Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber elastic bandage with rim, 2 pieces -Tire size: Ø 410 x 130 mm -Bolt circle: Ø 205 x 18 mm -Hub bore: Ø 158 mm -Submission/Price: complete Ljdpfx Aoyzpl Ejfajhf -Dimensions: Ø 410 x 130 mm -Weight: 20 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Lsdpfx Afoytpl Ueajhf Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Year of construction: 2026, condition: new, functionality: fully functional, Technical data: Working width: 2540 mm Maximum sheet thickness: 2.5 mm Maximum bending angle: 135° Lhjdpfxsytparo Afaof Length: 2880 mm Width: 1020 mm Height: 1450 mm Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer Lhsdpfx Afsyn Rhmeaof -Handover: in its current condition as inspected -Condition: without brakes, without lights -Manufacturer: Heavy-duty transport wagon with 1-axle turntable steering -Platform: 12,000 x 2,490 mm -Load capacity: 24 t -Tires: Pneumatic dual tires 8.25R15, see photos -Overall dimensions: 2490/13940/H1050 mm -Transport dimensions: 2490/12400/H1150 mm -Weight: 6600 kg

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains Lhodexvc N Djpfx Afaof 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Ljdoxvc Rzspfx Afajhf Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: good (used), Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber elastic bandage with rim, 2 pieces -Tire size: Ø 420 x 80 mm Lodpjyx U Rzjfx Afajhf -Bolt circle: Ø 142 x 18 mm -Hub bore: Ø 110 mm -Submission/Price: complete -Dimensions: Ø 420 x 80 mm -Weight: 19 kg/pc.

Condition: good (used), functionality: fully functional, overall weight: 5,000 kg, total height: 290 mm, total length: 4,000 mm, total width: 2,000 mm, plate height: 290 mm, plate width: 2,000 mm, working height: 290 mm, table height: 290 mm, table width: 2,000 mm, transport width: 2,000 mm, transport height: 290 mm, transport length: 4,000 mm, space requirement width: 2,000 mm, space requirement length: 4,000 mm, space requirement height: 290 mm, Surface: 2.000 x 4.000 mm Lodpswzchmjfx Afaohf Plate height: 290 mm Weight: 5 ton

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, cardboard roll carrier, transport roller, carrying roller -Transport trolley: with cutting device -Roll: Ø 327 x 1800 mm rubberized -Shaft: Ø 50 x 415 mm -Drive shaft/mount: Dimensions see photos -Dimensions: 2355/520/H327 mm -Weight: 286 kg/unit Lhedpfx Afjyx Agwsaef

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, winding roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine -Roll: Ø 150 x 2040 mm -Shaft: Ø 44 x 330 mm -Drive wheel: Ø 198 mm / Dimensions see photos -Dimensions: Ø 200 x 2680 mm Lhodpfxjxmi Hwo Afasf -Weight: 50 kg

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine -Roll: Ø 75 x 2040 mm -Shaft: Ø 44 x 330 mm -Drive wheel: Ø 188 mm / Dimensions see photos Lhedpfsxmi E Tjx Afajf -Dimensions: Ø 198 x 2760 mm -Weight: 55 kg

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used Lhjdeyzc Iajpfx Afaof The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: -Quantity: 1x ultrasound transducer available Ledpfxsyxm Rto Afaehf -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base Ledporw Daaefx Afashf -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: good (used), Desk, height adjustable desk -Manufacturer: Palmberg, height-adjustable desk Lodpfx Afjttim Hoaohf -Tool-free: height adjustable by means of removable adjusting elements -Width: 2000mm -Depth: 800 mm -Height: 680-760mm -Number: 6x desk available -Price per piece -Dimensions: W/D/H 2000/800/H720 mm -Weight: 43 kg/piece

Condition: like new (used), Year of construction: 2019, load capacity: 1,200 kg, lifting height: 6,500 mm, construction height: 3,000 mm, operating hours: 1,874 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: P + F - 3F6500 ID: 25116.5772 Category: Used Mast: 3F Lowered height: 3000 mm Lifting height: 6500 mm Capacity: 1200 kg / 600 kg Platform height: 6500 mm Order picking height: 8100 mm Cabin width: 1400 mm Year: 2019 Lhedpfxoyy At Te Afaof Operating hours: 1874 hours Battery: 48 V / 620 Ah Options: - Triplex mast - FFL - SPECIAL platform!!!! (L x W = 2000 x 1400 mm!!) - Guidance rollers on the safety gates – complete, LIKE NEW!!

Condition: excellent (used), lifting height: 2,000 mm, load capacity: 2,000 kg, total length: 2,600 mm, total width: 800 mm, transport length: 2,600 mm, power: 1.5 kW (2.04 HP), roll width: 700 mm, 2 WTT Fördertechnik - hydraulic scissor lift tables with driven roller conveyor. Type: E.20.16.8.2.0.RB, Length - 2600mm, width - 800mm roller width 700mm Lhodpfouyhltjx Afaof Load capacity 2000kg each Lifting height max 2000mm

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt, belt conveyor -Speed: 6 m/min -Conveyor belt width: 130 mm Lhjdpfx Afsyvy Dbsasf -Conveyor belt length: 1020 mm -Motor/Transmission: 0.18 kW -Dimensions: 1020/335/H285 mm -Weight: 19 kg

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Ljdpeg R Sh Asfx Afaehf Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw Ledpsyvrd Tefx Afaohf -Manufacturer: Reich, band saw, table saw with stand -Motor: Dietz 0.8 kW -Cutting width: max. 200 mm -Cutting height: max. 275 mm -Saw blade: Length 2200 mm -Dimensions: 830/720/H1715 mm -Weight: 114 kg