Used Schmidt Technology Hydropneumaticpress Nr. 68 Mit Kps-Sps for sale (34,981)

Condition: excellent (used), Viessmann Vitoplex 120 kW. Low-temperature boiler with oil or gas burner. 1.0-9.5 Lasdpfoxgnx Sox Abzjg

Condition: used, functionality: unexamined, machine/vehicle number: KT 3881H / A2110, input voltage: 230 V, SPS Electronic KT 3881H multifunction insulation tester on frame Lajdpfjxlgu Asx Abzog Manufacturer: SPS Electronic Model: KT 3881H / A2110 Voltage: 230V (50Hz) On mobile frame with extra cables

Condition: used, Year of construction: 2004, gearing type: other, first registration: 01/2004, color: orange, mileage: 1,001 km, empty load weight: 810 kg, driver cabin: other, Vehicle location: Bovenden, Clearing width approx. 2700mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, changes, intermediate sale and errors excepted! Lsdpfx Ajwqg Ntebzeag - .

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Lasdex U Exuspfx Abzjg

Condition: used, Year of construction: 1986, Schmidt VF5 ZL Front-Mounted Snow Blower Laedpfx Aex Svwcobzsg Year of manufacture: 1986 Specifications: Attachment plate size: 3 Discharge chute with hydraulic side adjustment Drive via PTO shaft Clearing width: 2,600 mm Weight: 1,650 kg Sale in current condition and only to businesses! Our business hours: Mon-Thu: 07:00 - 15:30 Fri: 07:00 - 15:00 Offer based on our general terms and conditions! Sale to commercial customers only! Used vehicles/equipment are sold without liability for material defects according to our T&Cs! If you have any further questions, I am at your disposal. For viewings and/or test drives, please arrange an appointment in advance! Vehicles/equipment are not always available on site.

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Laedjfkm Dpepfx Abzog Pronar MPB 18.47 Pronar MPB 20.55 Pronar MPB 20.72 also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail.

Year of construction: 1992, condition: not inspected (used), Bagging machine and net clipper, double unit, manufacturer Strapack, for apples, potatoes, 1-5 kg capacity. The machine is in very good condition and was in operation for only about 10 years. The machine has 4 bagging stations, which allows for a throughput of approximately 15-20 2 kg bags per minute. The machine is complete with all accessories and ready for operation. The machine has been fully overhauled; price upon request. Lasdpfx Aohh Idrsbzjg I am also selling SPARE PARTS for EW20, EW10 and net clippers UC20. If interested, please contact:

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) Laedpfx Ajfx N Uijbzjg The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder Laedof U Spxepfx Abzog New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: used, Year of construction: 1982, gearing type: other, first registration: 01/1982, color: orange, mileage: 1,001 km, empty load weight: 350 kg, driver cabin: other, Vehicle location: Bovenden, clearing width 2600mm, plow height approx. 860mm, weight approx. 350kg! Dismantling of Daimler-Benz SK 1928 4x4! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Laedpfstvbanox Abzjg - .

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. Lodpfx Abeh D H Rcjzoag They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Year of construction: 1992, condition: used, Plate heat exchangers for milk processing. Ljdpfx Aoh Eulgsbzeag

Condition: used, mileage: 999 km, first registration: 01/2000, Salt shaker control panels: - Acometis - 24V - Price per piece You can find our entire vehicle stock at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale! Laedpfxjqxudds Abzsg

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Laedpfxoi Rmi Do Abzjg Equipment: Snowplow, plow width: 5200 mm, plow height: 1300 mm. ACCESSORIES ARE LISTED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Year of construction: 2002, condition: used, heat exchanging device, 4 bar, year: 2002, price: 1.500 €, contact: Herr Rainer Eckerle Lasdpfx Abo Saauszsg

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm Ledpobnpgxjfx Abzjag - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Laodpfx Abev I Skrjzeg Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: new, Diamond Cube – Fiber Laser Cutting System | Compact | Precise | Efficient The Diamond Cube is a space-saving and high-performance fiber laser cutting system for professional metal processing. It is ideal for companies that want to combine high cutting quality and economical production in a compact machine. Technical highlights: – Working area: 3000 × 1500 mm (standard format) – Laser power: available in various power levels depending on the configuration – Material processing: steel, stainless steel, aluminum, etc. – Maximum material thickness: up to approx. 40 mm (depending on the power) Laodpfx Abefz Di Aezog – Positioning speed: up to 120 m/min – Precise servo drive & robust gantry design – Front loading with pull-out table for quick part changes, load capacity up to 1.4 t – Modern CNC control with integrated CAD/CAM software – Low maintenance requirements thanks to fiber laser technology Advantages for your production: – High cutting quality and repeatability – Compact design – minimal space requirement – Fast changeover times and easy operation – Very good economy and low operating costs – Ideal for small to medium-sized series as well as job production The Diamond Cube is the ideal solution for companies in the steel construction, mechanical engineering, and metal processing industries that want to modernize their production and rely on a reliable, precise, and energy-efficient laser cutting system.

Condition: new, Year of construction: 2024, We convert laser cutting machines from CO2 to fiber laser Laedpfonkal Dsx Abzog

Condition: new, Titan DrillCut – Flexible cutting and drilling center for maximum efficiency Lodpefz A I Esfx Abzoag The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and threading in a single machine. The robust portal design ensures vibration-free machining, even with thick materials up to 200 mm. The integrated VarioDrill system allows for efficient machining of holes from Ø 6 to 40 mm and threads from M4 to M20 without the need for hardening. An automatic tool changer ensures a quick change between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where the highest precision, flexibility, and production speed are crucial.

Year of construction: 2020, condition: new, The Sapphire is the optimal solution for the heavy industry, handling material thicknesses up to 200 mm. It enjoys great popularity in a variety of production facilities – often those operating in three shifts – as well as in all applications where stability, efficiency, and process reliability are particularly important. Thanks to its high-quality equipment, the system is a versatile tool for the highest demands and a helpful instrument for process optimization. Having been deployed in over 400 industrial facilities worldwide, the Sapphire cutting system proves its worth every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm Lajdpfxsf Ak N Re Abzeg - Extraction system PFC 6 incl. extraction ducts - Delivery, assembly, and commissioning Key features • High dynamics and precision in automated 2D & 3D cutting of sheets, tubes, and profiles • Sheet metal processing up to a material thickness of 200 mm • Extensive cutting data library for ideal user-friendliness • Designed for the highest demands under the most challenging conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2,000-7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Height of work table: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Lajdpfx Abor D Nfkezjg Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class Lodpecwpkpjfx Abzoag 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Condition: used, Year of construction: 1998, voltage 400/50 V/Hz output 13 kw The Parker Polyflex SMM100 is a specialized hose assembly machine designed for the precise assembly of ultra-high-pressure thermoplastic hose lines. A safety three-jaw chuck ensures stable fixation and reliable force transmission during the pressing-in of fittings. Lsdpfx Abjzz S Ndszsag In our estimation, the machine is in good used condition and can be inspectedunder power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 7,097 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,900 mm, power: 55 kW (74.78 HP), empty load weight: 4,500 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Air Ljdpfxjzuh Nme Abzsag Front tires condition: New Rear tires type: Air Rear tires condition: 40 - 60% Description: MANITOU MT 625 telescopic loader (ST3B series) - - 2.5 tons lifting capacity - - - 6m reach - - - Year of manufacture 2015 - - - 7097 operating hours according to the meter - - - 2-speed hydrostatic transmission - - - mechanical quick coupler - - - 4-cylinder KUBOTA diesel engine TURBO 75 hp - - - 4-wheel steering - - - 4-wheel drive - - - 3 steering modes - - - 4500 kg operating weight - - - Overall height 1.9m - - Width 1.80m - - Length 4m - - - - Front tires NEW, rear tires approx. 50% - - - including used pallet forks - - - very maneuverable loader - - Telescopic forklift in good condition - - - NEW BUCKET available at an extra cost!! - - - Inspection and test drive possible - - including CE Declaration of Conformity + operating manual - - - Delivery possible. Quick coupler, 3rd valve, 4th valve, front work lights, heater, full cab, CE certificate.