Used Schmidt Snow Plow for sale (646)

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Ksdpfjy Ea Hnsx Abzenb Main Spindle: Chuck:SAMCHULLY HS-12 (12 inch) Spindle Speed (Max.):3,000 RPM Spindle Nose:A2-8 Motor Power (Cont./Max):18.5 kW / 26 kW Max. Turning Ø x Turning Length:405 mm x 956 mm Tool Carrier (X/Z): Number of Tool Stations:12x BMT65 Max. Milling Ø:433 mm Travel (X/Z):245 mm / 1,040 mm Rapid Traverse (X/Z):24 m/min / 30 m/min Tailstock: Quill Ø:110 mm Quill Stroke:100 mm Equipment/Accessories: Additional Equipment:Tool touch probe (Tool Setter, swiveling) Collision Protection:Turret with Hirth coupling Year of Manufacture:2023 Weight:5,600 kg (according to configuration nameplate) Chip Management:Chip conveyor Electrical Connection:380 V / / 50/60 Hz / 42 kVA : :

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, 1. Technical Data * Maximum permissible fifth wheel load: 12,000 kg * Maximum permissible axle load: 24,000 kg * Gross vehicle weight rating: 36,000 kg (technically up to 39,000 kg) * Technical details for registration and manufacturer’s plate included. 2. Chassis and Body * Welded ladder-type frame in modular construction * Multi Lock outer frame for flexible load securing * Load compartment length: 13,620 mm, load compartment width: 2,480 mm 3. Protection and Safety * Rear underrun protection and side guard device in compliance with EU directive * Rear access ladder * Two mechanical landing gears, operated from one side 4. Axles and Running Gear * 3 axles, each with a 9,000 kg load capacity * KRONE axles with air suspension and disc brakes (430 mm diameter) * Lifting and lowering system with automatic lift axle control * 1st axle configured as a lift axle 5. Wheels/Tyres * 6 units, 385/65 R 22.5, M+S tread (Mud & Snow) * Smart Tyre Monitoring and TPMS (telematics services available) * Wheel nuts with protective caps 6. Brakes & Electrical System * Braking system compliant with ECE Regulation 13 including ABS and EBS Knedpfsyz Et Sex Abzsb * Spring-actuated parking brake * Full LED lighting, side marker lights with indicator function, additional sockets 7. Floor & Interior * 30 mm thick, waterproof and sealed hardwood floor * Rear portal through-loading height: 2,700 mm * Steel front wall with impact protection plate 8. Tarp & Side Walls * PVC tarpaulin, sliding cover, reinforced and with tensioning system * Roof tarpaulin white, side and rear contour markings 9. Other Equipment * Toolbox, pallet stop, warning panels, beverage transport certificate * Telematics Premium 24 months included 10. Paintwork & Appearance * Chassis deep black RAL 9005 * Wheel rims in natural silver * Side underrun protection in white 11. Certificates * Load securing certificates according to EN 12642 XL and VDI 2700 Part 12 * EU Certificate of Conformity and Registration Certificate Part II

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment Knodpfx Asyy Hgqebzsb :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, Surcharge for partition wall installation: +990.00 euros net Kedpfxeyg U Iuo Abzsnb To ensure you receive the best possible advice, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Special Equipment: A50 Front axle with increased load capacity, CB7 Stabilization Level I, CL3 Leather steering wheel, D03 High roof, D93 Omission of partition wall, ED8 Wiring pre-installation, configurable special module, E1E Navigation, E1U USB socket 5V, E3M MBUX multimedia system with 7" touchscreen, FG8 Front cupholders, F64 Electrically folding exterior mirrors, G43 9G-TRONIC automatic transmission, HH2 Electric additional hot air heater, HH9 TEMPMATIC semi-automatic air conditioning, H12 Additional hot water heater, H15 Passenger seat heating, H16 Driver seat heating, JB7 Parking package with reversing camera, J0V Pre-installation for blind spot assist, LB1 Side marker lights, LG7 LED High Performance headlights, MS1 Cruise control, P48 Rear mud flaps, QA9 Crossmember with integrated step, Q22 Fixed ball head trailer coupling, RM1 Mud & snow tires, RM9 Specially requested tire brand, R65 Spare wheel carrier at end of frame, R87 Spare wheel, R98 Special painted steel wheels, S23 Dual passenger seat, V36 Roof lining, V43 Wooden floor, W18 Sliding window front left in side wall/sliding door, W19 Sliding window front right in side wall/sliding door, XH2 Weight variant 5,200 kg, XM4 Acoustic package Standard Equipment: AR5 Axle ratio i = 4.727, BA3 Active Brake Assist, BH1 HOLD function, CL1 Height and tilt adjustable steering wheel, C6L Multifunction steering wheel, ED4 Fleece battery 12V 92 Ah, ES0 Jump-start contact, EW6 Remote Services Plus pre-installation, EX9 3 years free map updates, EY2 Pre-installation for Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, E07 Hill-start assist, E1D Digital radio (DAB), E30 Single-pole main battery switch, E43 13-pin trailer socket, FF5 Overhead shelf above windshield, FJ4 Compartment under dashboard, F68 Heated, electrically adjustable exterior mirrors, H1B Tachograph control front under headliner, H21 Heat-insulating glass with band filter on the windshield, IG4 Standard, IG5 Basic, JA8 Crosswind Assist, JD6 Smart tachograph EU, JH3 Communication module (LTE) for digital services, JW5 Lane Keeping Assist, J10 Speedometer km/h, J55 Passenger seatbelt warning, J58 Driver seatbelt warning, J65 Exterior temperature display, KP7 SCR emission control generation 4, K13 Main tank 71 liters, LA2 Light assist, LB5 3rd brake light, LE1 Adaptive brake light, L21 Rear backup light bottom, L94 Omission of parking light, MD4 90 km/h EG speed limiter, MJ8 ECO start/stop function, MP6 Engine version Euro VI, MR0 Emissions standard E (for heavy commercial vehicles), MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800 rpm, M60 Alternator 14V / 250A, RS6 Steel wheels 5.5 J x 16, RX1 Wheels without specified brand, SA5 Driver airbag, S02 Driver seat, S22 Armrest for driver seat, T16 Right-hand sliding door, T86 Entry handle on rear right corner post, W70 Tinted windows in rear, privacy glass We would be happy to provide you with an offer for your used vehicle trade-in. If you would like to lease or finance your vehicle, we will gladly prepare a customized offer. Subject to prior sale and errors excepted. Mr. Kiel will be happy to assist you. ESP, Navigation system, Full service history, New general inspection (HU), Partition wall, Electr....

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Brother C00, _____ Description: Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpm Movement X/Y/Z : 700/400/300 mm Tool holder : BBT 30 Mainspindle: Technology:Directdrive Speed:10.000 rpm Power (max.):26,2 kW Torque (max.):92 Nm Taper:BBT 30 Workingtable: Clampingsurface:800 x 400 mm Tableloading (max.):250 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:50/50/56 m/min Equipment/Accessory: Chipmanagement:Chip coveyor Coolingmanagement:Minimumlubrication (IKZ), Company Lubrix V5 4.-Axis:Lehmann EA-510 with Counterbearing Workpiececlamping:Hydrulic, 80-210 bar Knjdpfx Ajylrn Aebzsb Contactcontrol:Pneumatic Automationinterface I:Automatic Door (electrical) Automationinterface I:Robotinterface Oilmistseparation:Mechanical extraction, company Sara UC1 SD Columnextention:150 mm Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: used, mileage: 10,539 km, power: 75 kW (101.97 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,515 kg, maximum load weight: 985 kg, overall weight: 3,500 kg, axle configuration: 4x4, wheelbase: 1,850 mm, next inspection (TÜV): 01/2027, brakes: other, color: orange, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,750 mm, loading space width: 1,250 mm, loading space height: 300 mm, maximum speed: 50 km/h, Equipment: additional headlights, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, * German vehicle * Multiple units available * Only 10,539 km – original * ONLY 974 operating hours * MOT valid until 01/2027 * Condition as shown in the photos * KIF snow plough blade * Clearing width: 1,700 mm * KIF combination rear spreader * HAKO broom available at extra cost * With only 1.32 meters width, the Tremo is the ideal compact tool carrier for pedestrian zones, narrow alleys, driveways, etc. * Three-way tipper with steel floor and aluminium drop sides * Body dimensions: L=1,750 x W=1,250 x H=300 mm * 4x4 all-wheel drive with crawler gear * Four-wheel steering selectable – turning circle only 3.10 meters * EasyDrive (hydrostatic drive) (SN) Knjdpfsx Sramsx Abzeb * Heated front windscreen * Front linkage * VW industrial engine * Joystick controls * Radio CD * Comfort cabin with 2 seats * Municipal hydraulics + rear hydraulics * Rotating beacon * Worm gear drive * Winter service lighting * Work lights * Wheelbase: 1,850 mm * GVW: 3,500 kg * Unladen weight: 2,515 kg * Payload: 490 kg * ... * Various attachments for year-round use available at extra cost Should a new MOT inspection be required, we will be happy to provide a quote from our partner workshops. Our offer generally does NOT include new MOT, new DGUV, new periodic inspection, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly desired. All information provided without guarantee. We accept no liability for errors or incorrect information in this offer. Buyers are required to independently verify the condition and equipment of the goods/vehicles for themselves. Subject to change, prior sale, and error.

Condition: used, Year of construction: 2015, gearing type: other, first registration: 01/2015, color: orange, mileage: 1,001 km, empty load weight: 325 kg, driver cabin: other, Vehicle location: Bovenden, from Mitsubishi Canter 4x4! Plow width approx. 2400 mm! Plow height approx. 650 mm! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Knjdjx I Scmspfx Abzob

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Knedpfjmhhf Sex Abzob Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Knedomhh Dtspfx Abzsb Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. Knodpfomidyfsx Abzeb The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: ready for operation (used), functionality: fully functional, first registration: 07/2025, overall weight: 1,056 kg, color: orange, operation weight: 1,056 kg, Year of construction: 2001, Snow plough: + Beilhack + Model: PV30-4 + Year of manufacture: 2001 + 360 cm wide + Pin spacing at mount: 635 mm Kodpfxewz Ikgj Abzjnb + 4 cutting edges + Steel blade + 1,056 kg Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, _____ Description: Year of manuf. : 2022 Technical Data: Nominal load capacity (max.):6.000 kg Nominal pulling force (max.):1.200 kg Knedpfx Abew S D Nfszjb Speed (Empty run):10 km/h Speed (Loaded run):6 km/h Ground clearance:50 mm Wheelbase:1.032 mm Equipment/Accessory: Tuggertrain:Double U-Frame for 2x Drive frames 1.200 x 1.000 mm Stroke monitoring:Electrical for tugger and trailer Trolleyhandling:Trolleymover Further Accessory:Misc. Drive frames

Year of construction: 1958, condition: used, Copper 4-vessel brewhouse for a production of approx. 100 hl / brew consisting of mash kettle, mash tun, lauter tun and wort kettle as well as a whirlpool. The brewhouse was rebuilt and modernized several times in the years 199 Additional title: 1958-2001 Capacity: 100 hl/batch Features: mash tun (copper), mash kettle (stainless steel, 1977), lauter tun (copper, false bottom made of stainless steel), wort kettle (stainless steel and copper cladded) with inner cooker (modification 1999), vapor condenser (Nerb, 2001), wort cooling heat exchanger, Schmidt-Bretten, type Sigma37H Knsdpfovcqp Nex Abzob Periphery: spindle station, wort pumps, cast wort pumps, warm water storage, CIP (for wort kettle), 2 tuns (caustic and acid) every with 20 hl. incl. cleaning pumps), y.o.c.: 1989

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Kedpfeuw Dnxex Abzonb

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Knjdpfx Asvwfhijbzeb

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. Knodpfx Aeh Ek Daebzob The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), 42 linear meters of galvanized pallet racking for outdoor use, Nedcon Like new, see pictures! A top-quality racking system from the renowned manufacturer NEDCON - this is a subsidiary of Voestalpine AG with its headquarters in the Netherlands. Frame: Height 7.2 m, depth 110 cm, strong profiles, reinforced bracing, wind and snow load taken into account. Frame and base plates are hot-dip galvanized. Beam length 2.7 m, hot-dip galvanized Beam profiles 130/50mm, beams with load capacity per bay: 4000 kg Negotiable price: on request! Offer includes: + 16 units of frames, pre-assembled, depth 110 cm, height 7.2 m + 90 units of beams, length 2.7 m, 4000 kg load capacity per bay + 180 units of locking devices + 32 units of concrete anchors Surcharge for hot-dip galvanized feet including upright protection: €50,- per frame (net) Roof structure available on request! Load capacity signs, documents, etc. are of course included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are possible on request. Kjdpfx Aefndlljbzjnb Other configurations available on request. Over 2000 linear meters available. Inspection possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers in new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailers of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks, or racking for IBC containers - we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete worry-free package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for heavy-duty racking, galvanized / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, Sharpening woodworking tools The PROFI chisel (lancing bag) and planing knife grinding machine! No cheap ASIA copy! The original! WOOD-TOOL-GRINDER WTG-1 - «Swiss Currently the absolute cheapest PROFI wood tool grinder on the market! For a precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder sharpen your tools like: «Chisels, plow blades, chisels, chisels» fast, simple, accurate and inexpensive ... Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Where conventionally wood is processed. - For example, in carpentry, carpentry, - carpentry, schools, trade schools, - Training centers / training workshops ... Your advantages - Very precise, stable and stable construction - Fast, in just 30 seconds you grind a perfect flashless edge - Extremely easy to use, also for apprentices and unskilled workers - Dry grinding principle, i. no problems with moisture (water / oil) - Stepless cutting angle adjustment - You buy fewer new tools, thus lower maintenance and fixed costs Construction of the wooden tool grinding machine «WTG-1» The WTG is powered by a powerful 500 watt motor. The carriage used is a dust-proof, high-precision, ball-bearing profiled rail guide, which is used a thousand times in machine tools, industrial robots and precision special purpose machines. Stepless grinding is achieved by means of an accurate and self-locking dovetail. The tool clamping is safe and stable via a parallel clamping system. Technical specifications Weight: 20 kg Connection: 230 volts Motor: 500 watts Speed: 3000 rpm Grindable tool width: 5 - 60 mm Cutting angle adjustment: 25 - 30 ° degrees stepless Main grinding wheel: special corundum Ø 100 mm Polishing wheel / buffing wheel: special type ROTAX Ø 150 mm I would recommend you the basic machine and the grinding double set. So you are well prepared. Your direct contact person: Sir Marc Brönnimann Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo, Kjdpodt Ap Aofx Abzenb

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw Knodpfx Aberxtuiezob The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. Knjdpeqt Dmyofx Abzob When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2024, _____Basic equipment: two ploughshares mounted on the frame with king pin Collision protection via spring flaps Center pin secured against accidental triggering Hydraulic swivel device left-right Hydraulic installation with 4 quick hydraulic couplings and 1 unpressurized return connection Kerb deflector left-right Three-point mounting plate CAT 2N, 2 and 3N Overpressure valve Double-acting swivel cylinder Pendulum compensation up to 8° Adjustable sliding skids Central sliding skid with PU foot Spacer block for 40° end stop angle Municipal paint RAL 2011 Warning flags with holder LED lighting (only from 260 to 340) Steel scraper barOptional equipment:Three-point linkage Cat IIBoundary lights Selector valve for synchronous control 12 VSteel scraper barPicture serves as an example,Location:null Kedju Hv Szjpfx Abzjnb

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL Steuerung, _____ Description: Knodpfxjzxwdho Abzjb Year of manuf. : 2021 Power : 4 kW Standard equipment Working area:4000 × 2000 mm Control cabinets:Integrated Drive technology:Gantry combined with linear direct drives Waste removal:Longitudinal conveyor belt Positioning laser diode:Included Spray system:Included Automatic nozzle cleaning:Included Features :- NitroLine :- AdjustLine :- ControlLine :- FlyLine :- FocusLine :- FastLine :- PierceLine :- Brass cutting set :- Copper cutting set Laser TruDisk 4001 :- Power 4 kW :- BrightLine Fiber :- High-Speed Cutting Package :- Power Package for Fusion Cutting Additional machine functions :- Drop&Cut :- Integrated camera 1 for process monitoring Additional cutting packages :- High-speed Eco cutting package :- Pneumatic cutting Technical specifications Simultaneous operation:170 m/min Average positioning deviation (Ps):0.03 mm Positioning deviation (Pa):0.05 mm Minimum programmable step:0.001 mm X-axis:4000 mm Y-axis:2000 mm Z-axis:116 mm Maximum workpiece weight:2000 kg Structural steel:25 mm Stainless steel:20 mm Stainless steel (extended):35 mm Aluminium:20 mm Copper:8 mm Brass:8 mm Software:incl. software licence

Condition: used, functionality: fully functional, machine/vehicle number: H2X386C05500, Year of construction: 2012, operating hours: 11,161 h, load capacity: 2,000 kg, lifting height: 6,070 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,680 mm, fork length: 1,200 mm, empty load weight: 3,860 kg, drive type: Elektro, Electric 3-wheel forklift Kodpfx Ajzgyn Eebzonb Chassis number: H2X386C05500 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 930Ah Battery year of manufacture: 2022 Battery condition: 60 - 80% Description: Workshop inspected with UVV certification Side shifter, 3rd valve, rear work light, front work light, roof cover, windshield, STVZO compliance, full cabin, CE certificate, scale, joystick, Full cabin with heater, vehicle lighting, work lights front and rear.

Condition: new, functionality: fully functional, This listing is for information purposes only and does not constitute a legally binding offer. The WARRANTY applies exclusively to machines purchased DIRECTLY from us, not from other dealers. KINGWAY DEUTSCHLAND is the only authorized stationary specialist dealer for the Kingway brand on the German market, with its own dedicated service department. ORDER YOUR MACHINE FROM A DEALER OPERATING NATIONWIDE ACROSS GERMANY! WHEN PURCHASING FROM US, YOU ARE GUARANTEED SERVICE AND THE POSSIBILITY TO MAKE WARRANTY CLAIMS – UNLIKE WITH OTHER DEALERS. Model: ZL918 Neon Operating weight: 4,150 kg Max. load capacity: 1,800 kg Bucket capacity: 0.65 m³ Dumping height: 2,850 mm 4-cylinder diesel engine: 36.8 kW / 2,200 rpm Hydraulic pressure: 16 MPa Steering angle: ±35° Turning radius: 4,500 mm Tyres: 20.5 / 70-16 Ground clearance: 200 mm Travel speed: 28 km/h Dimensions: 5,050 x 1,750 x 2,520 mm FEATURES: Knsdpfx Abjyk Sngezob - Exceptionally high-quality and robust build - Lockable cab, fuel tank, and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy handling - Highly maneuverable - Compact and versatile - Fully road-compliant lighting system - Hydraulic quick-coupler system - Dedicated hydraulic circuit for attachments - CE certified according to the latest standards and directives - Purchase possible WITHOUT VAT (only with valid VAT ID) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within a 200 km radius - Wheel loader / yard loader ZL918 NEON - Including 4-in-1 bucket + pallet forks - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - Float position For each of our loaders, you can additionally order: - Tow bar, - Counterweights, - Any type of accessory, such as push brooms, grapple buckets, snow ploughs, high-volume buckets, sweepers, grab buckets. PRICE: EUR 20,000 net EUR 23,800 gross

Year of construction: 2016, condition: as good as new (ex-display), Round industrial tent, brand SUIHE, new, model: XL-308515R, year of manufacture 2016 Dimensions: width 9.15 m x length 26 m x height 4.57 m Knedpfxji Hc Dre Abzsb Structure: galvanized steel structure, Φ60*1.8mm and Φ40*1.5mm, made of Q215 steel tubes, according to GB/T700-2006 standard. Tarpaulins: PVC material thickness 300g PE, double fabric covered with PVC, factory colors: green or white. Access door type: simple mechanical door Door dimensions: 3.5 m x 3.5 m Snow resistance: 2.28 kpa (Compressive stress at a deformation) Wind resistance: 80km/h Standard duration of use: more than 15 years. Uses: industry, agriculture, material storage, car storage, hangar, Increased resistance, easy to assemble and disassemble, large capacity, excellent stability. The tent material is green with white. Model dimensions in meters: XL-308515R 9.15*26*4.59 (W*L*H (m)) 300g PE Metal box packaging Transport metal box dimensions 2.95m*0.75m*1.18m Tent weight: 1300kg Use of SUIHE industrial tents: 1. Agriculture: shelter for animals and storage space for hay. 2. Aviation: hangar for planes 3. Space for storing machines, industrial equipment, temporary hall 4. Navy: ship storage, containers 5. Garage for vehicles etc. PRICE 8.500 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana