Used Robosoft Haco Hacc 013 Ppes 30135 for sale (4,901)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers Psdoy Hkd Hopfx Ak Depr - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Ppjdpey Dq Adjfx Ak Djr Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Ppjdpfjy Dq Aqex Ak Djr

Condition: new, functionality: fully functional, Details: Manufacturer: KAESER Item: Oil Separator / Oil Separator Cartridge Part number: 6.2013.0 Size: Ø 275 x 462 mm Condition: New, in original packaging (OVP) Psdpfx Aoy E Rxnok Djpr Quantity: 2 units available Application: For KAESER screw compressors Maintenance / Service / Spare part Advantages: Original KAESER spare part Immediately available Ideal for stockpiling or maintenance

Condition: good (used), functionality: fully functional, power: 175 kW (237.93 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 200 l, color: blue, overall weight: 29,700 kg, maximum load weight: 25,000 kg, lifting height: 10,500 mm, tire size: 18.00 R25, tire condition: 90 %, axle configuration: 4x4, number of seats: 1, mast type: telescopic, Year of construction: 2013, operating hours: 700 h, Equipment: all wheel drive, cabin, gripper hydraulics, head guard, hydraulics, pallet forks, 🔧 Key Specifications: • Year: 2013 • Operating hours: 700 h Ppsdsy Ianqjpfx Ak Dor • Max. lifting capacity: 25,000 kg • Boom type: Fixed • Max. working height: 10.50 m • Max. outreach: 5.80 m • Engine type: Turbocharged direct injection common rail diesel • Engine power: 175 kW / 238 HP • Transmission: Hydrostatic, 2-speed forward/reverse • Drive: 4x4 • Steering modes: Front / Concentric / Crab • Tyres: 18.00 R25 • Weight: 29,700 kg • CE certification: Yes • Pallet forks: Yes • Air conditioning: Yes • Auxiliary hydraulics: Yes • AdBlue: Yes ✨ Highlights: ✅ Carefully selected from trusted sources with verifiable history ✅ CE certification and full documentation included ✅ Pallet forks included ✅ Air conditioning ✅ Auxiliary hydraulics ✅ AdBlue system ✅ Ready for immediate transport and operation ⚙️ Condition: Very good condition — inspected and serviced. Available for immediate operation. 🌍 Location & Delivery: 📍 Located in Sittard, the Netherlands 🚚 Worldwide delivery available 💰 Price: €235,000 excl. VAT Robust and powerful Magni HTH 25.11 — ideal for extreme lifting conditions. With a lifting capacity of 25 tonnes, this machine is engineered for demanding industrial applications such as mining, quarrying, and heavy logistics.

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 04/2026, fuel type: diesel, color: green, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system concept, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * diesel engine 2.0 l/130 kW * Start-stop system with brake energy recovery * One towing eye at the front and one at the rear * Preparation for trailer coupling * Standard wheelbase 3,640 mm * Mud flaps front and rear * Fuel tank 75 l * Reinforced suspension/damping and stabilisation * 3.5t approval * Reinforced front axle * 4 steel wheels, 6 1/2 J x 16, 1,050 kg load capacity each, black * All-season tyres * Electronic immobiliser Ppjdpfx Akoy H Udqj Dsr * Electrical terminal strip and KFG with * ABH programming * 'Climatronic' air conditioning in the cab * Second battery (AGM battery) with isolating relay and battery monitoring * Daytime running lights with assistant and coming/leaving home function * LED main headlights with LED daytime running light * LED interior lighting concept in passenger/cargo area * Fog lights incl. cornering light * Preparation for roof beacons front * Side marker lights * Heated windscreen washer nozzles * Washer fluid level indicator * Step lighting * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors left and right convex, with integrated LED indicators and wide-angle area * High roof, painted in vehicle colour * Entry handles on rear pillars * Radiator grille, black with chrome trim * Windscreen wiper interval control with light and rain sensor * Sliding door, right * Laminated windshield with thermal insulation glazing, heated * Front bumper in grey * Driver and passenger airbags, passenger airbag deactivation * Roof console with storage, two 1-DIN slots, and reading light * Sun visors, foldable and tiltable to the side * Electronic parking brake * Premium interior noise insulation * Lockable, illuminated glove compartment * Heated leather multifunction steering wheel with Tiptronic * 3-point automatic seat belts with height adjustment * 12V socket in the cab (on the dashboard) * Seatbelt reminder, electronic contact in belt lock * 2 remote control keys * Keyless Go * Air parking heater plus auxiliary water heater, auxiliary water heater with radio remote control * Chrome package * Suspended 'ergoActive' driver's seat, left * Swivel seat, right * Seat covers in durable fabric 'Marathon' * Heated driver and passenger seats, individually adjustable * Digital instrument cluster * Tyre pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van Navigation Business (12.9 inch) * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assistant * ESP with electronic differential lock, traction control (ASR), and ABS * Parking sensors front and rear * ACC Stop & Go * Traffic sign recognition * Reversing camera system with dynamic guidance lines * High-beam assistant 'Light Assist' * Attention and fatigue detection * Lane change assistant * Crosswind assist * Blind spot warning both sides and starting warning * Turn assist * Emergency assistant (Active lane keeping assist, Emergency Assist, and traffic jam assistant) * Intelligent speed assistant * With multifunction camera * Cruise Assist Plus * Child lock, electrically operated * Lashing rings for cargo securing * MAN TGE Individual Perfor

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 8,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, FUSO CANTER 9C18 Latest Generation with Jotha CombiCon 5518 Skip Loader Body Downrating to 7,490kg possible * 3.0L Turbo Diesel Engine, 129 kW / 175 HP, EURO 6 * Automatic transmission * Wheelbase: 3400mm * Rear axle with twin tires and automatic differential lock * Traction tires 205/75 R16C * Four-wheel disc brakes * Electronic Stability Program (ESP) * ABS with electronic brake-force distribution 3-year warranty on the base vehicle from the date of initial registration or up to 100,000km. Optional warranty extension up to 5 years or 200,000km available at extra cost. Comfort cab with the following features: * Electric windows * Electrically adjustable, heated mirrors * Central locking with remote control * Immobilizer * Adjustable steering wheel and column * Digital tachograph * EC tachograph recording device * Storage above windshield & behind seats * Double passenger bench seat * Driver airbag * Lane departure warning system * Emergency braking assistant * Turn assist system * Air-suspended driver's seat with armrest * Headrests * Lockable glovebox * Fog lights with automatic daytime running lights * Tilting cab * Automatic climate control * Double DIN radio with Apple CarPlay and reversing camera Ppodpjw Nl Ecefx Ak Dor * Canter safety package * Sun visor * Steering wheel with multifunction controls * Body: Jotha CombiCon 5518 * For skip containers from 2 to 10 m³ capacity according to DIN 30720 and Jotha flat skips. * Lifting capacity up to 5,500kg * Individually controllable telescopic arms * Lift stroke 1,000mm * Loading area width between lifting arms: 2,025mm * Hydraulic supports left/right * Hydraulic container catch hook * Lateral and front container stops adjustable * Chains with safety latch hooks and chain shorteners * Other cab variants, wheelbases, bodies and hydraulic systems for snow plows and spreaders in stock or available on short notice. Please enquire! More Fuso Canter and Multicar vehicles can be found at: Leasing / Financing / Rental / Trade-in of your used vehicle possible. * ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors * Our general terms and conditions apply.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,202 h, load capacity: 4,000 kg, lifting height: 6,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,800 mm, motor manufacturer: GM 3.0, fork length: 1,200 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 3,800 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, Very good condition Combilift. Mast duplex 6000 mm with free lift Sideshift We sell forklifts after a full service. Prepared for the end user. Ppodsy Hkxwjpfx Ak Dsr Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,202 h, load capacity: 4,000 kg, lifting height: 5,500 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,520 mm, motor manufacturer: GM 3.0, fork length: 1,200 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 3,520 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, Very good condition Combilift. Mast duplex 5500 mm with free lift Sideshift We sell forklifts after a full service. Pjdpey Awaajfx Ak Depr Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 432 h, functionality: fully functional, overall weight: 346 kg, fuel type: electric, fuel: electricity, IPC GANSOW 1010E SWEEPER NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2013 year of production Machine mileage is 432 hours New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1010 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 5600 Sweeping speed (km/h): 7 Tank capacity (l): 65 Filter surface (m²): 4 Dimensions L x W x H (mm) 1500 mm x 970 mm x 1200 mm Weight of the machine ready to work (kg) ~ 346 Pjdewl Irropfx Ak Dspr INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER NEW roller brush NEW side brushes NEW roller rubber guards 65l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1010 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: used, mileage: 190,447 km, power: 112 kW (152.28 HP), first registration: 10/2000, fuel type: diesel, overall weight: 7,490 kg, Equipment: crane, Well-maintained Mercedes Atego 815 equipped with a Palfinger PK 7000 crane featuring radio remote control, 2 hydraulic and 2 mechanical extensions, and a maximum working height of 13 m. German vehicle, single owner. Palfinger PK 7000 specifications: Working height: 13 m Max. lifting capacity: 2,960 kg Lateral outreach: 1.80 m – 2,960 kg Pjdpfx Asx Rtfhek Depr 3.40 m – 1,790 kg 5.10 m – 1,160 kg 6.90 m – 870 kg 2 mechanical extensions: 8.90 m – 600 kg 10.90 m – 370 kg Radio remote control Flatbed dimensions: Length 4,200 mm, Width 2,450 mm Payload at 7,490 kg GVW: 1,970 kg Payload at 8,600 kg GVW: 3,080 kg Rockinger trailer coupling Towing capacity: 10,500 kg Auxiliary heater German vehicle Single owner Differential lock Radio Roof hatch Financing options available through our partner banks; we are happy to assist you. Please note that the vehicle is also advertised on other platforms, and we reserve the right to prior sale. All accessory specifications are provided without guarantee. Subject to changes, prior sale, or errors. We strongly recommend and offer viewing and inspection, so that you can assess the vehicle's condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged.

Condition: used, machine/vehicle number: 16989, Year of construction: 2018, operating hours: 4,815 h, load capacity: 1,250 kg, lifting height: 3,230 mm, load center: 500 mm, construction height: 2,100 mm, fork length: 1,200 mm, front tire size: 18 x 7 - 8 (70%), rear tire size: 18 x 7 - 8 (60%), overall weight: 2,665 kg, enginetype: Electric, manufacturer: Still Ppsdpfoy Hzcysx Ak Dor

Condition: good (used), Year of construction: 2006, I sell the 3-side brushing machine Wikoma SP-3/300 - 1350/2x15°/P, Year 2006. 2 pcs. Surface brushes from top Working width 1350mm Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy Ppjdpfxjvyln Ij Ak Dsr Available immediately.

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 276 h, load capacity: 454 kg, lifting height: 7,850 mm, lifting power: 454 kg/m, platform length: 2,160 mm, platform width: 1,100 mm, overall weight: 1,944 kg, transport length: 2,360 mm, transport width: 1,170 mm, transport height: 1,700 mm, fuel type: electric, tire condition: 85 %, color: blue, 🔧 Key Specifications: • Year: 2013 • Operating hours: 276 h • Machine width: 1.17 m • Drive system: 2 WD (dual front wheel) • Drivable at full height: Yes • Platform extension: Yes (0.91 m slide-out deck) • Power: 24 V DC (4×6V 225Ah batteries) • Working height: 9.80 m • Platform capacity: 454 kg • Power type: Electric • Type of battery: Lead-acid • Outriggers self-leveling: No • Platform size: 2.26 × 1.15 m (extended: 3.18 m) • Tyres: Solid, non-marking • CE certified: Yes • Machine weight: 2,447 kg • Indoor/Outdoor use: Both ✨ Highlights: ✅ Carefully selected from trusted sources with verifiable history ✅ CE certification and full documentation included ✅ Ready for immediate transport and operation ✅ Comprehensive technical documentation available ⚙️ Condition: Well-maintained machine in very good condition (rating 4/5). 85% tyre profile remaining. Clean exterior and complete functionality. Located in Sittard and available immediately. 🌍 Location & Delivery: 📍 Stored in Sittard, Netherlands 🚚 Worldwide delivery possible 💰 Price €7,000 (EXW, excluding VAT) Psdpfoy Hr Rhjx Ak Djpr Reliable Genie GS 2646 electric scissor lift with strong platform capacity and compact dimensions. Perfect for indoor and outdoor use with tight turning radius and excellent maneuverability. Equipped with proportional controls, non-marking tyres, and full-electric operation. Ready for work with tested components and service history. 🚚 Delivery: • Crane loading available on request for hassle-free handling at departure • Flexible dispatch options tailored to your destination and logistics preferences • All shipping handled professionally by Colle Rental & Sales logistics team

Condition: used, Laundry Roll Container 720 Liters – Galvanized Linen Container with 2 Tiers This laundry roll container is a robust and practical solution for the transport and storage of large quantities of laundry and linen. Thanks to its well-thought-out construction and spacious capacity, this linen container is ideal for use in laundries, Ppsdpfoy Hp Auex Ak Der

Condition: used, functionality: fully functional, machine/vehicle number: H2X391D013.., Year of construction: 2013, operating hours: 7,500 h, load capacity: 2,000 kg, lifting height: 3,850 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: H2X391D013.. Load center: 500 mm Fork width: 980 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Hydrostatic Condition: Ready to use and fully operational Ppsdpfxoy Hmyqs Ak Djr Technical condition: good Front tires type: Solid rubber Front tires condition: 60 - 80% Rear tires type: Solid rubber Rear tires condition: 40 - 60% Side shifter, 3rd valve, rear work light, front work light, semi-cabin,

Condition: used, functionality: fully functional, machine/vehicle number: H2X391H035.., Year of construction: 2018, operating hours: 7,223 h, load capacity: 2,000 kg, lifting height: 3,850 mm, free lift: 100 mm, fuel type: gas, mast type: duplex, construction height: 2,460 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift Pedpey Hmx Tofx Ak Dopr Chassis number: H2X391H035.. Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Solid rubber Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, half cab,

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: IRB6640-130/3.2 IRC5, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully functional: including robot arm, controller, all cabling, and teach pendant. Comes with our warranty and a comprehensive 77-Point Protocol inspection performed by our in-house robotics engineers. Brand: ABB Podpfx Akey Edrus Djpr Model: IRB6640-130/3.2 Controller: IRC5 Payload: 130 kg Reach: 3.2 m General use: Heavy-duty, floor-mounted Applications: Material handling, machine tending, spot welding, among others. Optional: We can supply the robot with the ABB IRBT6004 linear track (up to 32 meters if required). Supplied complete including 7th axis drive unit in the robot controller, motor, cable chain, grease pump—fully functional and ready to operate. IRS Robotics® Refurbishment: - 77-Point Protocol – fully tested and inspected on our test benches - New oil/grease, new batteries - Fully cleaned and repainted in your desired RAL color - Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About us: We are your reliable partner for refurbished A-brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. Worldwide shipping available.

Condition: excellent (used), machine/vehicle number: 43954, Vacuum: 20 mbar Motor Oil: Type SAE 30 Pedeyqyftepfx Ak Dspr Qt.: 6 Ltr.

Condition: ready for operation (used), Year of construction: 2021, load capacity: 10 kg, arm reach: 1,300 mm, number of axes: 6, This 6-axis DOOSAN M1013 collaborative robot was manufactured in 2021. It features a payload capacity of 10 kg and a reach of 1,300 mm, making it suitable for various applications. The machine includes a stable construction with an aluminum plate and a rotary table for enhanced functionality. If you are looking to get high-quality automation capabilities, consider the DOOSAN M1013 collaborative robot we have for sale. Contact us for further details. • Total dimensions: 1,790 x 1,100 x 900 mm • Documentation: Complete documentation, risk assessment, and CE conformity declaration included Ppodpfx Asy D S S Tjk Dor Additional equipment • Machine table: Stable construction with 20 mm aluminum plate (840 x 700 mm) • Additional pallet: 400 x 700 mm support surface • Storage system: Rotary table with automatically rotatable hole-pattern plate (28 mm pitch) • Gripper: Pneumatic double-parallel gripper with quick-change jaws • Insertion aid: Spring-loaded compensating adapter (21 N) for raw part placement • Controller housing: EPS-Case IP54 for robot controller, pneumatic valves, and I/O modules • Construction: Open Item profiles with external T-slots for modular expansion • Electrical/pneumatic: 24-pin Harting plug set, pneumatic connection, ready to plug in • Included accessories: 100 cylinder pins (12 x 120 mm), 5 sets of gripper finger blanks, blow-out nozzle, hose guide, tablet holder, splash guard

Condition: excellent (used), mileage: 122,600 km, power: 294 kW (399.73 HP), first registration: 08/2013, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 15 m³, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, parking heater, seat heater, spoiler, = Additional Options and Accessories = - Adaptive cruise control - Heated mirrors - Power brake booster - Roof spoiler - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Air horn - Beacon light - Disc brakes - Heated seats - Sun visor - Stability control - Auxiliary heater - Toolbox Pjdpfxey D A Dao Ak Dspr - Power take-off (PTO) = Further Information = General Information Applications: Cleaning, construction, demolition, ground drainage, land drainage, earthmoving, terrain management and arable farming Technical Information Engine displacement: 12,740 cc Transmission Transmission: Opticruise, semi-automatic transmission Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Axle brand: Nokian Hakkapelitta; Tread depth left: 90%; Tread depth right: 90% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Axle brand: Nokian Hakkapelitta; Tread depth left inner: 90%; Tread depth left outer: 90%; Tread depth right inner: 90%; Tread depth right outer: 90% Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Axle brand: Continental; Tread depth left: 70%; Tread depth right: 70% Functional Crane: Year of manufacture 2013 Body manufacturer: J. Hvidtved Larsen FlexVac 311 Maintenance, History and Condition APK (Roadworthiness test): Inspected until 01/2027 Technical condition: Very good Visual condition: Good

Condition: excellent (used), ABB IRB6640-130/3.20 and IRC 5 controller and cable's. DEVELOPMENT OF GSG ROBOTICS Ppsdpfsxq Trfsx Ak Djr GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Sahinler Hydraulic 4-Roll Plate Bending Machine Type 4RM 10-130 HRC Ppsdpfxjy Dq Exo Ak Der Technical Data: Performance - Bending length: 1050 mm - Bending capacity without pre-bending Upper roll - diameter x 5: 6 mm - Bending capacity without pre-bending Upper roll - diameter x 5: 5 mm - Bending capacity with pre-bending Upper roll - diameter x 5: 4 mm Rollers - Central rollers diameter: 130 mm - Side rollers diameter: 110 mm - Working speed: 5 rpm Drive - Motor power: 4.5 kW Dimensions - Length: 2750 mm - Width: 900 mm - Height: 850 mm Weight: approx. 1100 kg - Steel welded construction - Machines are designed for thin aluminum, steel, and stainless steel sheets. - Adjustment of the side rollers is done via a gear transmission. - Upper roll drive is fitted with a reduction gearbox. - Manual drop-end bearing for easy sheet removal - Mobile control panel - Cone bending device

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 311 h, load capacity: 318 kg, lifting height: 9,780 mm, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 2,367 kg, transport length: 2,440 mm, transport width: 1,160 mm, transport height: 2,440 mm, fuel type: electric, tire size: 38 × 13 cm (non-marking massief), tire condition: 80 %, color: blue, 🔧 Key Specifications: • Year: 2013 • Operating hours: 311 h • Machine width: 1.17 m • Drive system: 2 WD • Drivable at full height: Yes • Platform extension: Yes • Working height: 11.50 m • Platform capacity: 318 kg • Power type: Electric • Type of battery: Lead-acid • Outriggers self-leveling: No • Platform size: 2.41 m (length) × 1.15 m (width)+0,91m (Platform extension) • Tyres: Solid non-marking (38 × 13 × 28 cm) • CE certified: Yes • Machine weight: 2,812 kg • Indoor/Outdoor use: Both ⚙️ Condition: Well-maintained used machine in good condition. Battery tested and in good condition. Available immediately from our Sittard stock. 🌍 Location & Delivery: 📍 Stored in Sittard, Netherlands 🚚 Worldwide delivery possible 💰 Price €7,700 (EXW, excluding VAT) Ppjdpfx Akey E Rrze Dor Reliable used machine with complete service history and expert technical support. Benefit from one of the largest European stocks of new and used equipment. All machines are CE certified, and ready for immediate use. Spare parts and professional assistance available upon request. 🚚 Delivery: • Crane loading available on request for hassle-free handling at departure • Flexible dispatch options tailored to your destination and logistics preferences • All shipping handled professionally by Colle Rental & Sales logistics team

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 255 h, load capacity: 454 kg, lifting height: 9,500 mm, lifting power: 454 kg/m, platform length: 2,260 mm, platform width: 1,150 mm, overall weight: 2,812 kg, transport length: 2,410 mm, transport width: 1,170 mm, transport height: 2,390 mm, fuel type: electric, tire size: 38 × 13 × 28 cm, tire condition: 80 %, color: blue, === MAIN SPECIFICATIONS === Year: 2013 Operating hours: 255 h Machine width: 1.17 m Drive system: 2 WD Drivable at full height: Yes Platform extension: Yes (0.91 m slide-out) Working height: 11.8 m Platform capacity: 454 kg Power type: Electric Battery type: Lead-acid (4 × 6 V, 225 Ah) Outriggers self-leveling: No Platform size: 2.41 × 1.15 m (extends to 3.18 m) Tyres: Non-marking solid rubber (38 × 13 × 28 cm) CE certified: Yes Machine weight: 2,812 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Carefully selected used unit with verifiable service history CE certification and full documentation included Ready for immediate transport and use Comprehensive technical documentation available === CONDITION === Used condition (3/5) – some wear consistent with age and use Battery tested and functional Clean exterior and fully operational systems Available immediately from Sittard stock === LOCATION & DELIVERY === Located in Sittard, Netherlands Ppedpfx Ajy E Nx Tjk Dsr Worldwide delivery possible Price €7,200 (EXW, excluding VAT) Used Genie GS-3246 electric scissor lift with only 255 operating hours. Ideal for indoor and limited outdoor use thanks to compact dimensions and reliable 2WD traction. Fully CE certified. Spare parts and aftersales support available upon request. === DELIVERY === Crane loading available on request for smooth handling Flexible transport options tailored to your destination and logistics needs All shipments are professionally managed by the Collé Rental & Sales logistics team