Used Reisch Semi-Trailer With Walking Floor for sale (22,905)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, 2-stage support jacks, single-sided operation with anti-splash flaps according to EC Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long, for hose pipes 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes Isdpfxoi Rixko Abfoth 1 stainless steel grounding lug at the rear on the right on the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear on the right outside on the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation 3x brakes Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the screen in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating Instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-crossmember-load-transfer areas")! Country of Approval/Signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Acceptance according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Itedpfei Ri Euox Abfeh Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Itedpoi Ri R Sjfx Abfeh Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Front locking on tipping cylinder support with bilateral wedge inserts, rear locking on continuous rotating shaft with return spring Container attachments: Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as interlocking central tube frame with bolt locking Itedpfx Aboi Ri Avefoh 24 tons, 2-stage support wind, single-sided operation, with straight lower part, without thrust compensation Free support leg angle or free pivoting radius to the rear approx. 1850 mm 2 chock blocks with holder Semi-shell fenders with anti-splash flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab, truck must be suitably prepared, no truck installation. Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable additional LED work light at the rear, switched via reversing light Country of registration/ signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,860 kg, maximum load weight: 33,140 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Highest fifth-wheel load on the market (20") Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Iedpsi Ri E Aefx Abfoth Chassis, fifth-wheel, container Fine-grained steel welded construction, fifth-wheel plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic extension, 1st stage; rear extension extended, 1st stage: 2 x 20-foot or 1 x 40-foot with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended to 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended to 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic section as a telescoping central tube frame with bolt locking mechanism Without rear height adjustment and without foldable center supports; transport of containers without a tunnel is not possible. 2 container guides, including connection plate for electrical, air, and brake connections Plug-in adapter for front locking, for securing containers without a tunnel from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 to. 2-speed support jack, single-side operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, activated by 3 brake applications Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, 4 x 3-chamber lights + 1 round backup light and + 1 round rear fog light, yellow LED lighting on the sides 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total trailer length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Registration / License Plates Germany Type approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, saddle, and container Fine-grained steel welded structure, saddle plate with 2 interchangeable kingpin and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush at the rear Middle telescopic extension, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescopic extension, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel and overloaded towards the rear. Middle telescopic extension as an interlocking central tube frame with pin lock with height adjustment at the rear and foldable center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension on roller bearings, with hand crank 24 tons, 2-speed support winch, one-sided operation Underrun protection extendable for 45 ft containers Half-shell mudguards with anti-splash flaps according to EG Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axle offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping Iodoi Ri Exopfx Abfeth 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame, front section + rear extension hot-dip galvanized Rear area DB 7350 Novagrau - 10-year warranty against rusting or hot-dip galvanized - 15-year warranty against rusting

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 interchangeable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support 2 chocks with holder Aluminum side guard Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the screen in the driver's cab, the truck must be suitably prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! With certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched on via the reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Itsdei Riv Nspfx Abfoh Country of registration / signs Germany with Dekra approval and certificate (according to §13 EG - FGV) prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10 years guarantee against rust or hot-dip galvanized - 15 years guarantee against rust Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, saddle, and container Fine-grained steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush at the rear; note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and overhang to the rear Without height adjustment at the rear and without folding center supports; transport of containers without a tunnel is not possible. Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use. Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support legs, single-sided operation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders included With anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total weight Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist; activated by 3x brake (starting assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded lines for easy maintenance 200 spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the cab; truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides Iodpfx Aji Ri Eqjbfjth (Note! With certain tractor units, false diagnoses may occur, although the function is present) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear of the vehicle and the total length of the combination of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration/signs Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for license plate holder, single-row 390 contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Support legs black coated

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guides at the front, pluggable and removable Plug-in adapter for front locking, to secure containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation Itodpfji Rizusx Abfjh 2 chocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x brakes (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving stability system Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; truck must be correspondingly prepared Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin fail-safe sockets at the front Operating instructions Special permit required if the overall length of the combination exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear of the vehicle and the overall length of the combination of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Iodpfsi Ri Ayjx Abfjth Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with 2 interchangeable kingpins Container mounts: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload Transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Itjdpfx Absi Riwmsfsh Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Semi-fender with anti-spray flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure on the EBS module, located externally. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau, 10-year guarantee against rust penetration Support legs black coated without pallet box paint Note: Archive images!

Condition: used, axle configuration: 3 axles, first registration: 01/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,770 mm, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - Cooling/freezing unit - Air suspension - Disc brakes = Further information = Itsdpfxezb Hnij Abfoh Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Tyre tread left: 40%; Tyre tread right: 40% Rear axle 3: Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 8,780 kg Payload: 32,220 kg Gross vehicle weight: 41,000 kg Functional Loading platform height: 120 cm Refrigeration unit engine: Diesel and electric (14,985 operating hours diesel; 1,297 electric) Condition Damage: none Identification Registration number: OR-45-SB

Condition: used, functionality: fully functional, machine/vehicle number: WKESD000000726905 + 906, empty load weight: 5,080 kg, maximum load weight: 34,920 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2016, total length: 12,640 mm, total width: 2,480 mm, tire size: 385/55 R22,5", color: grey, The images are archive photos; the vehicle may still be in use! Krone Box Liner SDC 27 eLTU4 Suitable for various container configurations: 1x45" container, 1x40" container, 2x20" containers, 1x20" container (centrally or rear-mounted), 1x30" container (rear-mounted). Equipment: Height adjustment for tunnel-free containers, 385/55 R22.5" tyres, steel rims, extendable underrun protection, lift axle, 2x7 and 1x15-pin electrical connectors, spare wheel holder (basket version), BPW axles. The images are archive photos; the vehicle may still be in use! Ijdpfx Abjx R Uizsfsth

Condition: used, Year of construction: 2010, 2010 | Schmidt SKI 24 | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 18000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 11 inspection points 11 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rear door doesnt shut well , left stampframe cracked needs to be repaired, video of tipping Will be made by owner 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40862 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Ijdjy U Nkujpfx Abfeth ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: blue, The images are archive photos; the vehicle may still be in use! Chassis Platform Semi-Trailer for Freight Forwarders Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock" profile for lashing strap attachment Note: In order to attach the straps in combination with side walls, the side walls must be opened! Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 t 24 t, two-speed landing leg, single-sided operation, with straight base, without compensation mechanism Pull-out ladder at the rear Side-mounted door retainers Wheel chocks with holders Isdpfx Aswyiw Eebfsth Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or rear swing clearance approx. 1,930 mm Underrun protection, galvanized steel Full-width rear spray flaps Half-shell mudguards With anti-spray mud flaps only on the last axle Rear impact guard "Blocker" – galvanized crosswise steel angle as forklift and hinge protection Pair of ferry lashing eyes, marked yellow Pallet stop on both sides, approx. 15-20 mm high, bolted design; loading height is reduced by approx. 15-20 mm Spare wheel holder for one electronic wheel, including wheel mounting kit, basket type, brand Schoch! Spare wheel, same brand/type as main tires, steel rim Stainless steel toolbox, width=600/height=400/depth=500 mm, with polished, lockable door Stake pockets Front right: 5 rows of aluminum V-stake inserts Front left: without stake inserts Rear wall / rear corner posts Rear corner posts made of steel up to the lower edge of the roof, curtain pole mount with round tube and curtain tension ratchet Rear portal doors, 2-leaf design, each with 2 internal rotary bolt locks Curtain Curtain with welded horizontal and vertical straps Quick Lock system for side curtain with central locking, on left side only Stainless steel tension locks on right side Customs rope all around with holder at front wall (no customs seal, not in combination with Quick Lock) Customer labeling on side curtains and rear portal Curtain with high-strength embedded spring steel strips, left side (Attention! When fitted, no stake inserts front left) Roof Sliding roof, rear end-lift foldable upwards, sliding tarpaulin from rear to front, tarpaulin color: white EcoLift – roof can be raised by approx. 380 mm, both sides, gas strut assisted Optimal rain gutter at rear, upper end rail, above the doors Paintwork Frame: Hot-dip galvanized incl. passivation Landing legs: black coated Front corner posts: galvanized and painted to match front wall color Front wall: MB 5328 blue Rear corner posts: galvanized and painted to match rear wall Rear wall: MB 5328 blue Curtain: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images are archive photos; the vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: VAVJS1339HD392852, empty load weight: 6,290 kg, maximum load weight: 32,710 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,840 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 385/55 R22,5", color: grey, available in multiple units The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, for transport companies Fine-grained steel welded construction 24-ton support legs, single-sided operation, with semi-circular lower part and straight connection plate, with lateral support Extension ladder at the rear Door latches on the side Half-shell fenders above all axles Anti-spray flaps behind the 3rd axle 2 rear impact buffers 1 large plastic storage box mounted on the front right and 2 smaller plastic storage boxes mounted on the front left Tarpaulin rope all around with 2 retainers on the front wall (no customs seal) Axles + suspension SAF disc brake axles Air suspension Braking system 2-line pneumatic braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Itedpfowyiygex Abfjh Note: The semi-trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Front wall / corner posts at the front 2 x 580 mm high, steel corner posts in full volume design, release mechanism for side tarpaulin on the front wall Rear wall / corner posts at the rear Steel corner posts at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal rotary bar locks each Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tension closures made of stainless steel Roof Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front available in multiple units The images are archive images; the vehicle may still be in use.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, transport company Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219, 2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping. Itsdpfxswhp A Do Abfeh Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension, without lift axle. The images are archive images; the vehicle may still be in use.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802032235, empty load weight: 4,983 kg, maximum load weight: 33,017 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2022, suspension: air, tire size: 385/55 R22.5", color: light green, Attention: The images are archive images! The vehicle may still be in use! Chassis: Saddle, container Fine-grained steel welded construction, saddle plate with replaceable 2" kingpin and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, rear-flush locking positions, new design for better saddle pressure with 20" rear-flush, rear lighting protected and recessed in the rear Center telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft without gooseneck tunnel Center telescope, 1st stage, rear extension extended, 1st stage: 1 x 40 ft with gooseneck tunnel Center telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and overloaded towards the rear Center telescope, 2nd stage, front extension extended, 1st stage, rear extension extended, 2nd stage: 1 x 45 ft with long gooseneck tunnel and angled corners, center telescope as an interlocking central frame with pin locking The transport of filled tank containers is not permitted. With height adjustment at the rear, in "hot-dip galvanized" version, and folding center supports for containers without tunnels Front container guide, pluggable Front crossbeam with current Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendable (for 45" containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without extension equalization 2 support wedges with holder Aluminum side impact protection Steel under-run protection, galvanized Extendable under-run protection for 45 ft containers Splash flaps at the rear over the entire width (not in conjunction with forklift holder) Half-shell fenders With anti-spray splash flaps according to EC standards Rear impact protection Isdpfxoww Icze Abfeth Spare wheel holder for 1 spare wheel, with wheel fastening kit 1 storage box for fire extinguishers up to 6 kg 1 fire extinguisher (ABC powder 6 kg)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23502035606, empty load weight: 5,325 kg, maximum load weight: 26,675 kg, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,490 mm, suspension: air, tire size: 385/65 R22,5", color: grey, trailer brake: trailer braked, The images shown are archive photos; the vehicle may still be in use! Chassis for Tipper Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Kingpin installed in the forward position Curved front panel (patented) 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with drawbar equalizer Unhitching under load is not possible; when unhitched, the vehicle must stand with a rearward slope. Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the forward position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with spring assist for easier operation Half-shell fenders Splash guards behind the last axle in asphalt design, hinged on the fender, with hook-up option at the top of the fender, fender shortened Tarp bar with holder Tow hook at the rear (not for Revolution model) Axles & Suspension BPW or SAF drum brake axles, manufacturer’s option Axles in off-road version "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation via "3x braking" (starting aid functions up to a 30% axle overload and up to a max. speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year rust-through warranty Braking System 2-line compressed air braking system Color-coded lines for easier servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by traction vehicles capable of ensuring ABS function! With lift & lower valve Vehicle stability control system Paver brake, electrically controlled from the truck, without truck installation Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber taillights, yellow LED side marker lights 2 white LED front position lights 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connecting cable 1 LED spotlight with integrated "Osprey" camera as trough camera (technical inspection required upon order) LED strobe light(s) at rear, controlled via switch in the truck, without truck installation, wired to pin 12 Upon order, specify pin allocation! Reversing camera system with color flat-screen monitor, wireless connection to monitor, monitor with suction mount and power supply via 24V vehicle socket Registration/Country & Plates Germany With Dekra approval and certificate (per §13 EC-FGV) 24/7 Service Hotline Body stability to EN 12642 Prepared for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white at the side and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year rust-through warranty" Landing legs: Black coated Body/Side panel: Scania Urban Grey 2389173 Itedox Dkpnepfx Abfsh Sliding tarp: RAL 7038 Agate Grey

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: white, construction height: 3,240 mm, Please note that these images are archive images; the vehicle may still be in use! Alcoa Dura Bright aluminum rims Air suspension 1st axle: automatic lift axle, including forced lowering and traction control, actuated with "3x brakes" (traction control is functional up to an axle load exceeding 30% and up to a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year warranty against perforation corrosion Electrics 24-volt, multi-chamber lights, yellow LED side lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable 2 additional LED work lights, integrated into the rear, controlled via the reversing light Hydraulics High-pressure cylinder max. 250 bar, lowest setting, hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm. (without hose connection) will be removed from the vehicle being claimed. Hydraulic operation via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Troughs Itsdewhfiyopfx Abfjh Aluminum box body made of high-quality, abrasion-resistant material. 5 mm thick sloping bulkhead with external cylinder mount. Side walls made of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper beam profile. Inside with access ramp on the bulkhead (not in combination with Cramaro). Shovel and brush holder on the outside on the bulkhead. Greenline - conical and aerodynamic body shape. "Membrane" rear wall. Rear wall as a swing flap with "double-joint hinge", externally mounted with double hook lock. Rear wall with rubber seal. Note: Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connecting plate for air/electrical connections, and brakes with generous clearance for optimal operation. Roll-up tarpaulin on one side for storage in the right-hand drive position, with central locking in the left-hand drive position

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. Itedpfx Ajxb D Swsbfsh 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902036561, empty load weight: 5,820 kg, maximum load weight: 29,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, suspension: air, tire size: 385/65 R22,5", color: red, Please note that the images are archive images! The vehicle may be in use! Tarp color can be freely selected. Chassis: Semi-trailer chassis Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing points additionally integrated into the outer frame, each 2.5 tons 14 pairs of lashing points additionally integrated into the outer frame, each 2.5 tons 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, with stroke compensation Manufacturer: SAF Note: Free support leg angle or free rear swivel radius approx. 1930 mm Extension ladder at the rear Door latch on the side 2 shims with holder Aluminum side impact protection Painted in RAL 3002 carmine red No liability/paint guarantee for overpainted coated components. Rear underrun protection, steel, galvanized Painted in RAL 9010 pure white, also the underrun protection holder No liability/paint guarantee for overpainted coated components. Quarter panel fenders in front of and behind the axle group With anti-spray flaps according to EC Rear impact protection 1 aluminum ladder approx. 2,550 mm, with holder on the side, behind the side impact protection Attachment rail on the outer frame for attaching tarp tensioners, in a bolted design approx. 15-20 mm above the loading area, with a hole profile at the top for lashing strap attachment, the Load Lock outer frame must be usable (as there are no lashing points). Can be used in conjunction with an aluminum insertion strip at the bottom as a stop! (not in conjunction with sideboards) 2 plastic toolboxes, w=800/h=450/d=450 mm 1 each on the left and right front, behind the 3rd axle Axles + Suspension BPW disc brake axles with 430 mm disc diameter Hubs painted in RAL 3002 carmine red "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake Itjdexbzkkepfx Abfsh 2 fail-safe coupling heads at the front, without connecting line 24 Volt EBS, manufacturer Wabco, Electronic Braking System with EBS socket at the front, without connection cable Caution: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! With lift and lower valve + auto-reset function Vehicle - Driving Stability System Telematics, including LIN battery, coupling sensor and tracking (without contract, this must be concluded by the customer). Wheels and tires 385/65 R22.5", manufacturer's choice Polished aluminum rim, manufacturer Alcoa Dura-Bright Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Light carrier painted in RAL 9010 pure white No liability/paint guarantee for overpainted coated components. 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable LED work lights on the side (switched via reversing light) Positioned at the height of the first crossmember behind the support legs 2 additional LED work lights at the rear, switched via reversing light Tarp Tarp with welded-in horizontal and vertical straps Customer lettering on the rear portal, tarp color can be freely selected.

Condition: used, empty load weight: 5,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2018, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Colour RAL 6016 turquoise green Disc brakes EBS Payload 33,500 kg Air lift suspension Isdpfx Asxz Efxobfoth Floor 6 mm + wall 6 mm with steel reinforcement BPW axles Alcoa aluminium rims Lifting and lowering device Electric Schwarzmüller sliding roof Foldable underrun protection 1st and 2nd axle liftable Errors excepted

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Itjdpfey Urtfjx Abfeh Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2009, 2009 | Blomenröhr 674/11900 | Used Low Bed Semi-trailer 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 11 inspection points 9 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Technically okay, rust on the axles, planks need to be replaced. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40827 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Itjdpfjy Ul Upex Abfoh ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.